Find Research Outputs

Search in all content

Filters for Research Output

Search concepts
Selected filters
1800

Fabrication of CrN/Cr2N bulk composites and their mechanical properties.

Aizawa, T., Kuwahara, H. & Tamura, M., 1800, In : J. American Ceramic Society.. 85 (2002)., p. 61-64

Research output: Contribution to journalArticle

Fabrication of nanostructured titanium thin films via N ion implantation and post-annealing treatment.

Muraishi, S., Aizawa, T. & Kuwahara, H., 1800, In : Surface Coating Technology.. 188-189 (2004), p. 260-264

Research output: Contribution to journalArticle

Fabrication of Ni-sheathed nickel aluminide wires from mechanically alloyed precursors.

Aizawa, T. & Kihara, J., 1800, In : Materials Science and Engineering.. A239-240 (1997), p. 522-531

Research output: Contribution to journalArticle

Fabrication of SUS 304 regularly cell-structured materials and their mechanical properties.

Tantikom, K., Kanahashi, H., Yamamoto, S. & Aizawa, T., 1800, In : Materials Transactions.. 44 [7] (2003), p. 1290-1294

Research output: Contribution to journalArticle

Feasibility of plasma nitriding for effective surface treatment of pure aluminum.

Visuttipitukul, P., Aizawa, T. & Kuwahara, H., 1800, In : Materials Transactions.. 44 [7] (2003), p. 1412-1418

Research output: Contribution to journalArticle

Forging characteristics of AZ31 Mg alloy.

Chino, Y., Mabuchi, M., Shimojima, K., Yamada, Y., Wen, C., Miwa, K., Nakamura, M., Higashi, K. & Aizawa, T., 1800, In : Materials Transactions.. 42 [3] (2001), p. 414-417

Research output: Contribution to journalArticle

Formation of protection layer during oxidation of Al-implanted TiN coating.

Akhadejdamrong, T., Iwamoto, C., Ikuhara, Y., Mitsuo, A. & Aizawa, T., 1800, In : Materials Transactions.. 43 [6] (2002), p. 1291-1297

Research output: Contribution to journalArticle

"Formulating a Transcultural Design Inquiring System Using Japanese Cultural Values in a Japanese Setting."

Dyer, G., Horiuchi, Y., Pointe, G. L., Lee, I-S., Minati, G., Osakabe, A. & Snow, R., 1800, In : Default journal. 9(1996), p. 1-15

Research output: Contribution to journalArticle

"Future Life-long Learning: A Provisional Model for the Creation of Value."

Brown, S., Chroust, G., Dyer, G., Horiuchi, Y., Metcalf, G., Rhee, M., Rhee, Y. P., Rowl, G. & Tagliaferri, C., 1800, In : Default journal. 11(1998), p. 59-68

Research output: Contribution to journalArticle

Gas nitriding of magnesium - titanium alloys fabricated by bulk mechanical alloying.

Luangvaranunt, T., Visuttipitukul, P., Kondoh, K., Kuwahara, H. & Aizawa, T., 1800, In : Materials Transactions.. 42 (2001), p. 1312-1316

Research output: Contribution to journalArticle

Grain Boundary Characterization and Evaluation by Acoustic Spectro Microscopy.

Xu, Y. & Aizawa, T., 1800, In : Ceramic Transaction.. 89 (1998), p. 205-216

Research output: Contribution to journalArticle

Granular Modeling Approach to Electro-Packaging Materials.

Aizawa, T., Iwai, T. & Kihara, J., 1800, In : J. Mechanics of Materials.. (1998), p. 83-91

Research output: Contribution to journalArticle

High speed bulk mechanical alloying of Cu/Ag/Co systems.

Kobayashi, O., Aizawa, T. & Kihara, J., 1800, In : Materials Transactions, JIM. 37 (1996) 1497-1504..

Research output: Contribution to journalArticle

Hydrogen absorption and electrochemical properties of Mg2-xNi (x = 0 - 0.5) alloys prepared by bulk mechanical alloying..

Kuji, T., Nakano, H. & Aizawa, T., 1800, In : J. Alloys and Compounds. 330-332 (2002), p. 590-596

Research output: Contribution to journalArticle

Hydrogen absorption of nanocrystalline palladium.

Kuji, T., Matsumura, Y., Uchida, H. & Aizawa, T., 1800, In : J. Alloys and Compounds.. 330-332 (2002), p. 718-722

Research output: Contribution to journalArticle

"Idealized Systems Design for Making Japanese University Students Better International Communicators,"

Horiuchi, Y., 1800, In : Default journal. 9(1996), p. 17-23

Research output: Contribution to journalArticle

Identification of Zinc Finger Proteins Bound to a Silencer Region in the Rat Glutathione Transferase P Gene.

Tanabe, A., Oshima, K., Osada, S., Nishihara, T. & Imagawa, M., 1800, In : Biol. Pharm. Bull.. 24, p. 970-974

Research output: Contribution to journalArticle

Improvement of crashworthiness in AZ91 magnesium foam controlling its microstructure.

Kanahashi, H., Mukai, T., Yamada, Y., Shimojima, K., Mabuchi, M. & Aizawa, T., 1800, In : Materials Science and Engineering. A308 (2001), p. 283-287

Research output: Contribution to journalArticle

Improvement of crashworthiness in ultra light-weight metallic foam by heat-treatment for microstructural modification of base material.

Kanahashi, H., Mukai, T., Yamada, Y., Shimojima, K., Mabuchi, M. & Aizawa, T., 1800, In : Materials Transactions.. 42 [10] (2001), p. 2087-2092

Research output: Contribution to journalArticle

Improvement of friction and wear performance of titanium nitride films by chlorine ion implantation.

Mitsuo, A. & Aizawa, T., 1800, In : materials transactions, jim. 40 [12] (1999), p. 1361-1366

Research output: Contribution to journalArticle

Influence of powder compaction and milling media on the formation of molybdenum disilicide by mechanically induced self-propagating reaction.

Yen, B. K., Aizawa, T. & Kihara, J., 1800, In : J. American Ceramic Society.. 79 (1996), p. 2221-2223

Research output: Contribution to journalArticle

In-situ solid-state synthesis of Mg2Si/MgO/Mg composites.

Du, W., Kondoh, K., Yuasa, E., Tsuzuki, R. & Aizawa, T., 1800, In : Materials Science Forum.. 419-422 (2003), p. 783-788

Research output: Contribution to journalArticle

In-situ synthesis of Mg2Si intermetallics via powder metallurgy process.

Kondoh, K., Oginuma, H., Matsukawa, S. & Aizawa, T., 1800, In : Materials Transactions.. 44 [5] (2003), p. 981-985

Research output: Contribution to journalArticle

"It's a Small World Idea Book Team: 1999 Asilomar Summary."

Horiuchi, Y., Jenks, L. & Park, S-H., 1800, In : Default journal. 12(2000), p. 55-62

Research output: Contribution to journalArticle

"It's a Small World Ideabook Team "Into the Rabbit Hole" Board Game Status Report: A Spiral Connecting 2002 and 2003 ISI Asilomar Conversations."

Devon, C., Gill, P., Jenks, L. & Horiuchi, Y., 1800, In : Default journal. 16(2003), p. 101-10

Research output: Contribution to journalArticle

Laser shock loading device for real time evaluation of shock induced reaction.

Ito, K. & Aizawa, T., 1800, In : J. Materials Processing Technology.. 85 (1998), p. 91-96

Research output: Contribution to journalArticle

Leaky pseudo surface wave on the water - Si (110) interface.

Xu, Y. & Aizawa, T., 1800, In : Physical Letters.. A 260 (1999), p. 512-515

Research output: Contribution to journalArticle

Low temperature sintering of dense alumina wire by green microstructure control.

Du, W., Tatsuzawa, K., Aizawa, T. & Kihara, J., 1800, In : Proc. 2000 Powder Metallurgy World Congress..

Research output: Contribution to journalArticle

Magnesium matrix composite with solid-state synthesized Mg2Si dispersoids.

Kondoh, K., Oginuma, H., Tsuzuki, R. & Aizawa, T., 1800, In : Materials Transactions.. 44 [4] (2003), p. 611-618

Research output: Contribution to journalArticle

Magnetic powder forming simulation subjected to pressing in magnetic Field.

Tamura, S., Aizawa, T. & Kihara, J., 1800, In : Default journal. 45 (1994), p. 353-358

Research output: Contribution to journalArticle

Measurement of ultrasonic attenuation in material surface layer by spectroscopy technique with ultrasonic reflectivity measurement.

Ihara, I., Aizawa, T., Koguchi, H. & Kihara, J., 1800, In : JSME International Journal.. (1995), p. 393-402

Research output: Contribution to journalArticle

Mechanical alloying behavior in molybdenum-silicon system.

Yen, B. K., Aizawa, T. & Kihara, J., 1800, In : Materials Science Forum.. 235 (1997), p. 157-162

Research output: Contribution to journalArticle

Mechanically Induced Reaction for Solid-State Synthesis of Mg2Si and Mg2Sn

Aizawa, T. & Song, R., 1800, In : J. Intermetallics. p. 382-391

Research output: Contribution to journalArticle

Mechanical properties of bulk sintered titanium nitride ceramics.

Kuwahara, H., Mazaki, N., Takahashi, M., Watanabe, T., Yang, X. & Aizawa, T., 1800, In : Materials Science and Engineering.. A 319-321 (2001), p. 687-691

Research output: Contribution to journalArticle

Mesoscopic Modeling for Superplasticity.

mechanics, I. T., equation, T. S., method, T. E., modeling., A. M. & Aizawa, T., 1800, In : Materials Science Forum.. 233-234 (1997), p. 37-46

Research output: Contribution to journalArticle

Microscopic determination of surface wave velocities in heat treated steels by ultrasonic reflectivity measurement.

Ihara, I., Aizawa, T. & Kihara, J., 1800, In : Nondestructive Characterization of Materials.. VI (1994), p. 87-95

Research output: Contribution to journalArticle

Microstructure evolution and superplasticity of rolled Mg-9Al-1Zn.

Mohri, T., Mabuchi, M., Nakamura, M., Asahina, T., Iwasaki, S., Aizawa, T. & Higashi, K., 1800, In : Materials Science and Engineering.. A290 (2000), p. 139-144

Research output: Contribution to journalArticle

Microstructure model for hot deformation and creep behavior on the basis of homogenization theory.

Aizawa, T., Tsumori, F. & Prawato, Y., 1800, In : Advanced Technology of Plasticity.. 2 (2002), p. 1213-1218

Research output: Contribution to journalArticle

Micro-XPS analysis of slide-tested TiN films with/without Cl+ implantation.

Yoshitake, M., Akhadejdamrong, T., Aizawa, T. & Yoshihara, K., 1800, In : Surface and Interface Analysis.. 34 (2002), p. 698-702

Research output: Contribution to journalArticle

Modeling creep damage based on the real microstructure.

Prawato, Y. & Aizawa, T., 1800, In : J. Practical Failure Analysis.. 2 [6] (2002), p. 68-79

Research output: Contribution to journalArticle

Morphology-free processing of magnesium alloys.

Kondoh, K., Luangvaranunt, T. & Aizawa, T., 1800, In : Materials Transactions..

Research output: Contribution to journalArticle

MR2719766

Kameko, M., 1800, In : Mathematical Reviews.

Research output: Contribution to journalArticle

Nano-crystallization by high speed mechanical alloying.

Aizawa, T. & Kihara, J., 1800, In : Powder Metallurgy World Congress-94.. (1994), p. 1357-1360

Research output: Contribution to journalArticle

Nano-granulation in Co-Cu system by bulk mechanical alloying.

Aizawa, T., Cheng, Z., Tokumitsu, K. & Kihara, J., 1800, In : Materials Science and Engineering.. A239-240 (1997), p. 233-241

Research output: Contribution to journalArticle

Nanogranulation process into magnetoresistant Co-Cu alloy on the route of bulk mechanical alloying.

Aizawa, T. & Zhoh, C., 1800, In : Materials Science and Engineering.. A285 (2000), p. 1-7

Research output: Contribution to journalArticle

Nano-structured materials via bulk mechanical alloying..

Aizawa, T. & Kondoh, K., 1800, In : Scripta Materiala. 44 (2001), p. 1751-1755

Research output: Contribution to journalArticle

NATIONAL GARDEN PARK DEVELOPMENT PROJECT

Isamu Koike, I. K. & Taniguchi, T., 1800, In : Default journal.

Research output: Contribution to journalArticle

Nondestructive evaluation of Co agglomeration and WC growth in WC/Co superhard alloys.

Aizawa, T. & Kihara, J., 1800, In : Nondestructive Characterization of Materials.. VI (1994), p. 575-583

Research output: Contribution to journalArticle

Non-equilibration of nanostructured Mg2Ni by bulk mechanical alloying.

Aizawa, T., Kuji, T. & Nakano, H., 1800, In : Materials Transactions.. 42 (2001), p. 1284-1292

Research output: Contribution to journalArticle