A method of determining cut position of automatic stem removal system for salted wakame

Adiljan Yimit, Motoki Takagi, Yukari Hagihara, Tasuku Miyoshi, Yoshihiro Hagihara

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

In the wakame production procedure, the manual operation process of stem removal is known as a hindrance to the wakame production. In order to solve this problem, we aspire to develop an automatic wakame stem removal system. The purpose of this paper is to propose a cut position determination method for the system by picking up the characteristic changes that appear at the cross section of the wakame. In this method, with the utilization of exposure control, two images are captured from the same cross section that is made by a developed device. These images are used in the segmentation of the cross section. The positions where the stem should be cut can then be determined through the examination of the thickness of the cross section. To verify the feasibility of the proposed method in developing an automatic removal system, 100 cross sections were generated from the roots of 10 samples of the salt-preserved wakame with an interval of 20 mm. In the experiments, the success rate was 76% with the width selection of 1.5mm allowable part of the stem left on the leaves, and it increased with the extension of the allowable part.

Original languageEnglish
Pages (from-to)188-196
Number of pages9
JournalAgricultural Engineering International: CIGR Journal
Volume17
Issue number1
Publication statusPublished - 2015 Mar 23
Externally publishedYes

Fingerprint

Undaria pinnatifida
stems
Exposure controls
methodology
Salts
salts
Experiments
leaves

Keywords

  • Automation
  • Exposure control and segmentation
  • Marine algae
  • Stem removal
  • Wakame

ASJC Scopus subject areas

  • Automotive Engineering
  • Agronomy and Crop Science
  • Energy (miscellaneous)
  • Industrial and Manufacturing Engineering

Cite this

A method of determining cut position of automatic stem removal system for salted wakame. / Yimit, Adiljan; Takagi, Motoki; Hagihara, Yukari; Miyoshi, Tasuku; Hagihara, Yoshihiro.

In: Agricultural Engineering International: CIGR Journal, Vol. 17, No. 1, 23.03.2015, p. 188-196.

Research output: Contribution to journalArticle

Yimit, Adiljan ; Takagi, Motoki ; Hagihara, Yukari ; Miyoshi, Tasuku ; Hagihara, Yoshihiro. / A method of determining cut position of automatic stem removal system for salted wakame. In: Agricultural Engineering International: CIGR Journal. 2015 ; Vol. 17, No. 1. pp. 188-196.
@article{06656b7d9b1041a28aa78d8fae7042f5,
title = "A method of determining cut position of automatic stem removal system for salted wakame",
abstract = "In the wakame production procedure, the manual operation process of stem removal is known as a hindrance to the wakame production. In order to solve this problem, we aspire to develop an automatic wakame stem removal system. The purpose of this paper is to propose a cut position determination method for the system by picking up the characteristic changes that appear at the cross section of the wakame. In this method, with the utilization of exposure control, two images are captured from the same cross section that is made by a developed device. These images are used in the segmentation of the cross section. The positions where the stem should be cut can then be determined through the examination of the thickness of the cross section. To verify the feasibility of the proposed method in developing an automatic removal system, 100 cross sections were generated from the roots of 10 samples of the salt-preserved wakame with an interval of 20 mm. In the experiments, the success rate was 76{\%} with the width selection of 1.5mm allowable part of the stem left on the leaves, and it increased with the extension of the allowable part.",
keywords = "Automation, Exposure control and segmentation, Marine algae, Stem removal, Wakame",
author = "Adiljan Yimit and Motoki Takagi and Yukari Hagihara and Tasuku Miyoshi and Yoshihiro Hagihara",
year = "2015",
month = "3",
day = "23",
language = "English",
volume = "17",
pages = "188--196",
journal = "Agricultural Engineering International: CIGR Journal",
issn = "1682-1130",
publisher = "International Commission of Agricultural and Biosystems Engineering",
number = "1",

}

TY - JOUR

T1 - A method of determining cut position of automatic stem removal system for salted wakame

AU - Yimit, Adiljan

AU - Takagi, Motoki

AU - Hagihara, Yukari

AU - Miyoshi, Tasuku

AU - Hagihara, Yoshihiro

PY - 2015/3/23

Y1 - 2015/3/23

N2 - In the wakame production procedure, the manual operation process of stem removal is known as a hindrance to the wakame production. In order to solve this problem, we aspire to develop an automatic wakame stem removal system. The purpose of this paper is to propose a cut position determination method for the system by picking up the characteristic changes that appear at the cross section of the wakame. In this method, with the utilization of exposure control, two images are captured from the same cross section that is made by a developed device. These images are used in the segmentation of the cross section. The positions where the stem should be cut can then be determined through the examination of the thickness of the cross section. To verify the feasibility of the proposed method in developing an automatic removal system, 100 cross sections were generated from the roots of 10 samples of the salt-preserved wakame with an interval of 20 mm. In the experiments, the success rate was 76% with the width selection of 1.5mm allowable part of the stem left on the leaves, and it increased with the extension of the allowable part.

AB - In the wakame production procedure, the manual operation process of stem removal is known as a hindrance to the wakame production. In order to solve this problem, we aspire to develop an automatic wakame stem removal system. The purpose of this paper is to propose a cut position determination method for the system by picking up the characteristic changes that appear at the cross section of the wakame. In this method, with the utilization of exposure control, two images are captured from the same cross section that is made by a developed device. These images are used in the segmentation of the cross section. The positions where the stem should be cut can then be determined through the examination of the thickness of the cross section. To verify the feasibility of the proposed method in developing an automatic removal system, 100 cross sections were generated from the roots of 10 samples of the salt-preserved wakame with an interval of 20 mm. In the experiments, the success rate was 76% with the width selection of 1.5mm allowable part of the stem left on the leaves, and it increased with the extension of the allowable part.

KW - Automation

KW - Exposure control and segmentation

KW - Marine algae

KW - Stem removal

KW - Wakame

UR - http://www.scopus.com/inward/record.url?scp=84926164566&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84926164566&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:84926164566

VL - 17

SP - 188

EP - 196

JO - Agricultural Engineering International: CIGR Journal

JF - Agricultural Engineering International: CIGR Journal

SN - 1682-1130

IS - 1

ER -