A new proposal of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD--first trial to develop individually designed cuff-units for continuous blood pressure measurement.

M. Ogawa, K. Motoi, T. Yamakoshi, M. Nogawa, Y. Yamakoshi, Masahiro Shibata, Y. Yamakoshi

Research output: Contribution to journalArticle

Abstract

The concept of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD (3D-CAD) was proposed. This concept is to make individually designed and fabricated sensor unit to attach human body. Within the proposed concept, cuff-units for continuous blood pressure measurement were individually designed using 3D-CAD and fabricated automatically. As the result, blood pressure wave forms can be obtained using the finally developed cuff units. Using rapid prototyping device, the design and fabrication process were accelerated without any artisan-like high skilled persons.

Fingerprint

Blood pressure
Rapid prototyping
Pressure measurement
Biosensors
Computer aided design
Fabrication
Sensors

ASJC Scopus subject areas

  • Computer Vision and Pattern Recognition
  • Signal Processing
  • Biomedical Engineering
  • Health Informatics

Cite this

@article{c977ddf4ba37423fade86b8fb28ed5e7,
title = "A new proposal of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD--first trial to develop individually designed cuff-units for continuous blood pressure measurement.",
abstract = "The concept of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD (3D-CAD) was proposed. This concept is to make individually designed and fabricated sensor unit to attach human body. Within the proposed concept, cuff-units for continuous blood pressure measurement were individually designed using 3D-CAD and fabricated automatically. As the result, blood pressure wave forms can be obtained using the finally developed cuff units. Using rapid prototyping device, the design and fabrication process were accelerated without any artisan-like high skilled persons.",
author = "M. Ogawa and K. Motoi and T. Yamakoshi and M. Nogawa and Y. Yamakoshi and Masahiro Shibata and Y. Yamakoshi",
year = "2011",
language = "English",
volume = "2011",
pages = "3994--3997",
journal = "Conference proceedings : ... Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Conference",
issn = "1557-170X",
publisher = "Institute of Electrical and Electronics Engineers Inc.",

}

TY - JOUR

T1 - A new proposal of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD--first trial to develop individually designed cuff-units for continuous blood pressure measurement.

AU - Ogawa, M.

AU - Motoi, K.

AU - Yamakoshi, T.

AU - Nogawa, M.

AU - Yamakoshi, Y.

AU - Shibata, Masahiro

AU - Yamakoshi, Y.

PY - 2011

Y1 - 2011

N2 - The concept of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD (3D-CAD) was proposed. This concept is to make individually designed and fabricated sensor unit to attach human body. Within the proposed concept, cuff-units for continuous blood pressure measurement were individually designed using 3D-CAD and fabricated automatically. As the result, blood pressure wave forms can be obtained using the finally developed cuff units. Using rapid prototyping device, the design and fabrication process were accelerated without any artisan-like high skilled persons.

AB - The concept of tailored bioinstrumentation using rapid prototyping and three-dimensional CAD (3D-CAD) was proposed. This concept is to make individually designed and fabricated sensor unit to attach human body. Within the proposed concept, cuff-units for continuous blood pressure measurement were individually designed using 3D-CAD and fabricated automatically. As the result, blood pressure wave forms can be obtained using the finally developed cuff units. Using rapid prototyping device, the design and fabrication process were accelerated without any artisan-like high skilled persons.

UR - http://www.scopus.com/inward/record.url?scp=84863589957&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84863589957&partnerID=8YFLogxK

M3 - Article

VL - 2011

SP - 3994

EP - 3997

JO - Conference proceedings : ... Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Conference

JF - Conference proceedings : ... Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Conference

SN - 1557-170X

ER -