A research on the evaluation of grindability of fine-ceramics by constant pressure grinding (1st report) -formulation of the removal rate in case of ductile mode and brittle mode grinding

Takekazu Sawa; Yasuyuki Nagato; Yasushi Ikuse; Kuniaki Unno

doi:10.2493/jjspe.74.247

A research on the evaluation of grindability of fine-ceramics by constant pressure grinding (1st report) -formulation of the removal rate in case of ductile mode and brittle mode grinding

Takekazu Sawa, Yasuyuki Nagato, Yasushi Ikuse, Kuniaki Unno

Research output: Contribution to journal › Article › peer-review

Abstract

The grindability of fine-ceramics is most important information in order to determine the optimum grinding conditions. This study proposes the method of grindability evaluation of fine-ceramics by removal rate in constant pressure grinding. The processing model under the constant pressure grinding was composed, and the removal rate was formulated from this processing model. As a result, the removal rate calculated from the processing model is well correspondent with the removal rate obtained by the experiment. From this result, the possibility of evaluating the grindability from the mechanical properties of fine-ceramics was found.

Original language	English
Pages (from-to)	247-251
Number of pages	5
Journal	Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering
Volume	74
Issue number	3
DOIs	https://doi.org/10.2493/jjspe.74.247
Publication status	Published - 2008 Mar
Externally published	Yes

Keywords

Brittle mode grinding
Constant pressure grinding
Ductile mode grinding
Fine-ceramics
Grindability
Removal rate

ASJC Scopus subject areas

Mechanical Engineering

Access to Document

10.2493/jjspe.74.247

Cite this

Sawa, T., Nagato, Y., Ikuse, Y., & Unno, K. (2008). A research on the evaluation of grindability of fine-ceramics by constant pressure grinding (1st report) -formulation of the removal rate in case of ductile mode and brittle mode grinding. Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, 74(3), 247-251. https://doi.org/10.2493/jjspe.74.247

A research on the evaluation of grindability of fine-ceramics by constant pressure grinding (1st report) -formulation of the removal rate in case of ductile mode and brittle mode grinding. / Sawa, Takekazu; Nagato, Yasuyuki; Ikuse, Yasushi et al.

In: Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, Vol. 74, No. 3, 03.2008, p. 247-251.

Research output: Contribution to journal › Article › peer-review

Sawa, T, Nagato, Y, Ikuse, Y & Unno, K 2008, 'A research on the evaluation of grindability of fine-ceramics by constant pressure grinding (1st report) -formulation of the removal rate in case of ductile mode and brittle mode grinding', Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, vol. 74, no. 3, pp. 247-251. https://doi.org/10.2493/jjspe.74.247

@article{688ce42ebfbf4807a49d079b8a5057be,

title = "A research on the evaluation of grindability of fine-ceramics by constant pressure grinding (1st report) -formulation of the removal rate in case of ductile mode and brittle mode grinding",

abstract = "The grindability of fine-ceramics is most important information in order to determine the optimum grinding conditions. This study proposes the method of grindability evaluation of fine-ceramics by removal rate in constant pressure grinding. The processing model under the constant pressure grinding was composed, and the removal rate was formulated from this processing model. As a result, the removal rate calculated from the processing model is well correspondent with the removal rate obtained by the experiment. From this result, the possibility of evaluating the grindability from the mechanical properties of fine-ceramics was found.",

keywords = "Brittle mode grinding, Constant pressure grinding, Ductile mode grinding, Fine-ceramics, Grindability, Removal rate",

author = "Takekazu Sawa and Yasuyuki Nagato and Yasushi Ikuse and Kuniaki Unno",

year = "2008",

month = mar,

doi = "10.2493/jjspe.74.247",

language = "English",

volume = "74",

pages = "247--251",

journal = "Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering",

issn = "0912-0289",

publisher = "Japan Society for Precision Engineering",

number = "3",

}

TY - JOUR

T1 - A research on the evaluation of grindability of fine-ceramics by constant pressure grinding (1st report) -formulation of the removal rate in case of ductile mode and brittle mode grinding

AU - Sawa, Takekazu

AU - Nagato, Yasuyuki

AU - Ikuse, Yasushi

AU - Unno, Kuniaki

PY - 2008/3

Y1 - 2008/3

N2 - The grindability of fine-ceramics is most important information in order to determine the optimum grinding conditions. This study proposes the method of grindability evaluation of fine-ceramics by removal rate in constant pressure grinding. The processing model under the constant pressure grinding was composed, and the removal rate was formulated from this processing model. As a result, the removal rate calculated from the processing model is well correspondent with the removal rate obtained by the experiment. From this result, the possibility of evaluating the grindability from the mechanical properties of fine-ceramics was found.

AB - The grindability of fine-ceramics is most important information in order to determine the optimum grinding conditions. This study proposes the method of grindability evaluation of fine-ceramics by removal rate in constant pressure grinding. The processing model under the constant pressure grinding was composed, and the removal rate was formulated from this processing model. As a result, the removal rate calculated from the processing model is well correspondent with the removal rate obtained by the experiment. From this result, the possibility of evaluating the grindability from the mechanical properties of fine-ceramics was found.

KW - Brittle mode grinding

KW - Constant pressure grinding

KW - Ductile mode grinding

KW - Fine-ceramics

KW - Grindability

KW - Removal rate

UR - http://www.scopus.com/inward/record.url?scp=77955411564&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=77955411564&partnerID=8YFLogxK

U2 - 10.2493/jjspe.74.247

DO - 10.2493/jjspe.74.247

M3 - Article

AN - SCOPUS:77955411564

SN - 0912-0289

VL - 74

SP - 247

EP - 251

JO - Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering

JF - Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering

IS - 3

ER -

A research on the evaluation of grindability of fine-ceramics by constant pressure grinding (1st report) -formulation of the removal rate in case of ductile mode and brittle mode grinding

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this