In fire evacuation situations, at corridors, many evacuees are plagued by high density, low velocity, and long waiting time. Therefore, engineers have to consider the countermeasure preventing crowd accidents. For this purpose, the development of pedestrian simulators that are constructed with concrete physical parameters, such as the headway distance between pedestrians, velocity, and specific flow, is required. To acquire the evacuation behavior in corridors, we conducted well-controlled pedestrian walking experiments in a confined corridor with realistic architectural geometry and modeled the pedestrian behaviors. An experimental loop corridor was constructed to acquire stable pedestrian flows without distractions from bottlenecks or merging flows. We conducted five experiments with different density patterns with an average density ranging from 1.28 to 3.42 people/m2 and a maximum of 96 test participants. We found that when the headway distance is 0.55–1.15 m, the velocity increases linearly with increasing headway distance, similar to single-file experiments. When the density is higher than 2.35 people/m2, the pedestrians cannot walk at a constant speed, and they exhibit stop-and-go behavior. In this situation, the percentage of pedestrians who walk at a headway distance of approximately 0.4–0.5 m, which is the minimum headway distance, increases. In addition, the fundamental diagram between density and velocity is acquired at a density higher than 1.4 people/m2 as an inversely proportional function. The density dependence on the specific flow is a linear function. The maximum specific flow is acquired at the marginal minimum density where a linear relationship is maintained.
- Headway distance
- Specific flow
ASJC Scopus subject areas
- Materials Science(all)
- Safety, Risk, Reliability and Quality