Analysis of Estimation Error on Observer for Disturbance and Velocity

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

This paper analizes some features of estimation error on the observer which estimates distur bance torque and velocity. This observer inputs the information of driving torque and current position, and outputs the information of disturbance torque and velocity. Although this observer is a practical tool to compose a robust control system, we have never enough information to make the most of it. So the study to grasp some basic features of the observer is needed now. And it is very inportant to analize the estimation error on it. Then, this paper considers the estimation error caused by disturbance torque and observation noise, because these seem to be the most significant causes. And the result of analysis gives the practical way to select a pole allocation of the observer. Finally, the simulation and the experimen tal results are shown.

Original languageEnglish
Pages (from-to)874-882
Number of pages9
JournalIEEJ Transactions on Industry Applications
Volume113
Issue number7
DOIs
Publication statusPublished - 1993 Jan 1
Externally publishedYes

Fingerprint

Error analysis
Torque
Robust control
Poles
Control systems

ASJC Scopus subject areas

  • Industrial and Manufacturing Engineering
  • Electrical and Electronic Engineering

Cite this

Analysis of Estimation Error on Observer for Disturbance and Velocity. / Shimada, Akira.

In: IEEJ Transactions on Industry Applications, Vol. 113, No. 7, 01.01.1993, p. 874-882.

Research output: Contribution to journalArticle

@article{71099d26a892439a98a43ddccd2de363,
title = "Analysis of Estimation Error on Observer for Disturbance and Velocity",
abstract = "This paper analizes some features of estimation error on the observer which estimates distur bance torque and velocity. This observer inputs the information of driving torque and current position, and outputs the information of disturbance torque and velocity. Although this observer is a practical tool to compose a robust control system, we have never enough information to make the most of it. So the study to grasp some basic features of the observer is needed now. And it is very inportant to analize the estimation error on it. Then, this paper considers the estimation error caused by disturbance torque and observation noise, because these seem to be the most significant causes. And the result of analysis gives the practical way to select a pole allocation of the observer. Finally, the simulation and the experimen tal results are shown.",
author = "Akira Shimada",
year = "1993",
month = "1",
day = "1",
doi = "10.1541/ieejias.113.874",
language = "English",
volume = "113",
pages = "874--882",
journal = "IEEJ Transactions on Industry Applications",
issn = "0913-6339",
publisher = "The Institute of Electrical Engineers of Japan",
number = "7",

}

TY - JOUR

T1 - Analysis of Estimation Error on Observer for Disturbance and Velocity

AU - Shimada, Akira

PY - 1993/1/1

Y1 - 1993/1/1

N2 - This paper analizes some features of estimation error on the observer which estimates distur bance torque and velocity. This observer inputs the information of driving torque and current position, and outputs the information of disturbance torque and velocity. Although this observer is a practical tool to compose a robust control system, we have never enough information to make the most of it. So the study to grasp some basic features of the observer is needed now. And it is very inportant to analize the estimation error on it. Then, this paper considers the estimation error caused by disturbance torque and observation noise, because these seem to be the most significant causes. And the result of analysis gives the practical way to select a pole allocation of the observer. Finally, the simulation and the experimen tal results are shown.

AB - This paper analizes some features of estimation error on the observer which estimates distur bance torque and velocity. This observer inputs the information of driving torque and current position, and outputs the information of disturbance torque and velocity. Although this observer is a practical tool to compose a robust control system, we have never enough information to make the most of it. So the study to grasp some basic features of the observer is needed now. And it is very inportant to analize the estimation error on it. Then, this paper considers the estimation error caused by disturbance torque and observation noise, because these seem to be the most significant causes. And the result of analysis gives the practical way to select a pole allocation of the observer. Finally, the simulation and the experimen tal results are shown.

UR - http://www.scopus.com/inward/record.url?scp=84938751919&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84938751919&partnerID=8YFLogxK

U2 - 10.1541/ieejias.113.874

DO - 10.1541/ieejias.113.874

M3 - Article

VL - 113

SP - 874

EP - 882

JO - IEEJ Transactions on Industry Applications

JF - IEEJ Transactions on Industry Applications

SN - 0913-6339

IS - 7

ER -