Bending Deformation Behavior of Aluminium Extruded Various Sections with Laminated Elastic Mandrel on Draw Bending

Y. Okude, Shouichirou Yoshihara, A. Saito, B. J. MacDonald

Research output: Contribution to journalArticle

4 Citations (Scopus)

Abstract

During draw bending process of thin walled aluminum sections, undesirable deformations easily occur. To prevent and predict undesirable deformation of occurrence, it is necessary to generate much data from various forming configurations and draw bending process parameters. Therefore, it is necessary to clarify the relationship between the behavior of undesirable deformation and cross-sectional shape of workpiece. In this study, the draw bending simulations of workpiece with various cross sections were calculated by finite element analysis(FEA) to confirm the bending characteristics. And, the relationship between methods for preventing undesirable deformation and cross-sectional shape was clarified in the draw bending experiment.

Original languageEnglish
Pages (from-to)4802-4811
Number of pages10
JournalMaterials Today: Proceedings
Volume2
Issue number10
DOIs
Publication statusPublished - 2015 Jan 1
Externally publishedYes

Fingerprint

Aluminum
Finite element method
Experiments

Keywords

  • Aluminum extruded sections
  • Bending
  • Draw bending
  • Laminated elastic mandrel

ASJC Scopus subject areas

  • Materials Science(all)

Cite this

Bending Deformation Behavior of Aluminium Extruded Various Sections with Laminated Elastic Mandrel on Draw Bending. / Okude, Y.; Yoshihara, Shouichirou; Saito, A.; MacDonald, B. J.

In: Materials Today: Proceedings, Vol. 2, No. 10, 01.01.2015, p. 4802-4811.

Research output: Contribution to journalArticle

@article{1b0dbbd0b66f430f94ff3c3d0fac1656,
title = "Bending Deformation Behavior of Aluminium Extruded Various Sections with Laminated Elastic Mandrel on Draw Bending",
abstract = "During draw bending process of thin walled aluminum sections, undesirable deformations easily occur. To prevent and predict undesirable deformation of occurrence, it is necessary to generate much data from various forming configurations and draw bending process parameters. Therefore, it is necessary to clarify the relationship between the behavior of undesirable deformation and cross-sectional shape of workpiece. In this study, the draw bending simulations of workpiece with various cross sections were calculated by finite element analysis(FEA) to confirm the bending characteristics. And, the relationship between methods for preventing undesirable deformation and cross-sectional shape was clarified in the draw bending experiment.",
keywords = "Aluminum extruded sections, Bending, Draw bending, Laminated elastic mandrel",
author = "Y. Okude and Shouichirou Yoshihara and A. Saito and MacDonald, {B. J.}",
year = "2015",
month = "1",
day = "1",
doi = "10.1016/j.matpr.2015.10.017",
language = "English",
volume = "2",
pages = "4802--4811",
journal = "Materials Today: Proceedings",
issn = "2214-7853",
publisher = "Elsevier Limited",
number = "10",

}

TY - JOUR

T1 - Bending Deformation Behavior of Aluminium Extruded Various Sections with Laminated Elastic Mandrel on Draw Bending

AU - Okude, Y.

AU - Yoshihara, Shouichirou

AU - Saito, A.

AU - MacDonald, B. J.

PY - 2015/1/1

Y1 - 2015/1/1

N2 - During draw bending process of thin walled aluminum sections, undesirable deformations easily occur. To prevent and predict undesirable deformation of occurrence, it is necessary to generate much data from various forming configurations and draw bending process parameters. Therefore, it is necessary to clarify the relationship between the behavior of undesirable deformation and cross-sectional shape of workpiece. In this study, the draw bending simulations of workpiece with various cross sections were calculated by finite element analysis(FEA) to confirm the bending characteristics. And, the relationship between methods for preventing undesirable deformation and cross-sectional shape was clarified in the draw bending experiment.

AB - During draw bending process of thin walled aluminum sections, undesirable deformations easily occur. To prevent and predict undesirable deformation of occurrence, it is necessary to generate much data from various forming configurations and draw bending process parameters. Therefore, it is necessary to clarify the relationship between the behavior of undesirable deformation and cross-sectional shape of workpiece. In this study, the draw bending simulations of workpiece with various cross sections were calculated by finite element analysis(FEA) to confirm the bending characteristics. And, the relationship between methods for preventing undesirable deformation and cross-sectional shape was clarified in the draw bending experiment.

KW - Aluminum extruded sections

KW - Bending

KW - Draw bending

KW - Laminated elastic mandrel

UR - http://www.scopus.com/inward/record.url?scp=84963568059&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84963568059&partnerID=8YFLogxK

U2 - 10.1016/j.matpr.2015.10.017

DO - 10.1016/j.matpr.2015.10.017

M3 - Article

VL - 2

SP - 4802

EP - 4811

JO - Materials Today: Proceedings

JF - Materials Today: Proceedings

SN - 2214-7853

IS - 10

ER -