Bulk mechanical alloying of Co-Cu

Tatsuhiko Aizawa, Zhao Cheng, Kazuto Tokumitsu, Junji Kihara

Research output: Chapter in Book/Report/Conference proceedingChapter

2 Citations (Scopus)

Abstract

Bulk mechanical alloying by the repeated forging system was applied to solid synthesis of solid solution in the immiscible material system. Co20:Cu80 system was particularly employed to investigate the refining and alloying processes into solid solution with increasing the number of cyclic loading. Both XRD and VMS are utilized to describe the relationship between Co-substitution into Cu-lattice and reduction of Co-magnetization. Through the annealing of this nano-structured solid solution, cobalt finely precipitates in the copper matrix, resulting in recovery of Co-magnetization.

Original languageEnglish
Title of host publicationCeramic Engineering and Science Proceedings
PublisherAmerican Ceramic Soc
Pages593-600
Number of pages8
Volume18
Edition4 B
Publication statusPublished - 1997
Externally publishedYes
EventProceedings of the 1997 21st Annual Conference on Composites, Advanced Ceramics, Materials, and Structures-B - Cocoa, FL, USA
Duration: 1997 Jan 121997 Jan 16

Other

OtherProceedings of the 1997 21st Annual Conference on Composites, Advanced Ceramics, Materials, and Structures-B
CityCocoa, FL, USA
Period97/1/1297/1/16

    Fingerprint

ASJC Scopus subject areas

  • Ceramics and Composites

Cite this

Aizawa, T., Cheng, Z., Tokumitsu, K., & Kihara, J. (1997). Bulk mechanical alloying of Co-Cu. In Ceramic Engineering and Science Proceedings (4 B ed., Vol. 18, pp. 593-600). American Ceramic Soc.