既存杭の引抜孔を対象とした炭酸ナトリウム混合セメントベントナイト系充填材

Translated title of the contribution: Cement-bentonite fillings mixing sodium carbonate for holes formed by pulling-out piles

Shinya Inazumi, Shuichi Kuwahara, Ko Hashimoto

Research output: Contribution to journalArticle

Abstract

In a series of studies, it is aimed to develop fillings for holes formed by pulling-out piles. Cement-bentonite is used as a filling in general. Although cement-bentonite has an advantage of being able to perform blending according to circumstance of work on site, cement and water cause segregation, so uniform filling is difficult. In addition, there is a disadvantage that cement-bentonite cannot perform a predetermined strength when diluted by penetration of groundwater and so on. Sodium carbonate (Na2CO3) is a substance expected to suppress the segregation of cement-bentonite and to speed up the development of strength. In this study, we conducted an indoor mixing test on fillings mixed with Na2CO3 into cement-bentonite which is a mixture consisting of water, cement and bentonite, and examined various characteristics from the viewpoint of physical and chemical aspects. The following two points were clarified; (i) by mixing Na2CO3, bleeding of cement-bentonite is suppressed and (ii) by mixing Na2CO3, the strength development time of the cement-bentonite becomes faster and the long-term strength also increases. These two points are considered to be due to the improvement of the swelling property of bentonite, the early strength development of cement and the formation of calcium carbonate (CaCO3).

Original languageJapanese
Pages (from-to)572-577
Number of pages6
JournalZairyo/Journal of the Society of Materials Science, Japan
Volume68
Issue number7
DOIs
Publication statusPublished - 2019 Jan 1

Fingerprint

Bentonite
sodium carbonates
bentonite
pulling
piles
cements
Piles
Carbonates
Cements
Sodium
sodium carbonate
bleeding
Water
Calcium Carbonate
calcium carbonates
Calcium carbonate
ground water
swelling
water
Swelling

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

既存杭の引抜孔を対象とした炭酸ナトリウム混合セメントベントナイト系充填材. / Inazumi, Shinya; Kuwahara, Shuichi; Hashimoto, Ko.

In: Zairyo/Journal of the Society of Materials Science, Japan, Vol. 68, No. 7, 01.01.2019, p. 572-577.

Research output: Contribution to journalArticle

@article{fa81e53a703e482d94154da812c11c87,
title = "既存杭の引抜孔を対象とした炭酸ナトリウム混合セメントベントナイト系充填材",
abstract = "In a series of studies, it is aimed to develop fillings for holes formed by pulling-out piles. Cement-bentonite is used as a filling in general. Although cement-bentonite has an advantage of being able to perform blending according to circumstance of work on site, cement and water cause segregation, so uniform filling is difficult. In addition, there is a disadvantage that cement-bentonite cannot perform a predetermined strength when diluted by penetration of groundwater and so on. Sodium carbonate (Na2CO3) is a substance expected to suppress the segregation of cement-bentonite and to speed up the development of strength. In this study, we conducted an indoor mixing test on fillings mixed with Na2CO3 into cement-bentonite which is a mixture consisting of water, cement and bentonite, and examined various characteristics from the viewpoint of physical and chemical aspects. The following two points were clarified; (i) by mixing Na2CO3, bleeding of cement-bentonite is suppressed and (ii) by mixing Na2CO3, the strength development time of the cement-bentonite becomes faster and the long-term strength also increases. These two points are considered to be due to the improvement of the swelling property of bentonite, the early strength development of cement and the formation of calcium carbonate (CaCO3).",
keywords = "Bleeding, Cement bentonite, Early strength, Sodium carbonate",
author = "Shinya Inazumi and Shuichi Kuwahara and Ko Hashimoto",
year = "2019",
month = "1",
day = "1",
doi = "10.2472/jsms.68.572",
language = "Japanese",
volume = "68",
pages = "572--577",
journal = "Zairyo/Journal of the Society of Materials Science, Japan",
issn = "0514-5163",
publisher = "Society of Materials Science Japan",
number = "7",

}

TY - JOUR

T1 - 既存杭の引抜孔を対象とした炭酸ナトリウム混合セメントベントナイト系充填材

AU - Inazumi, Shinya

AU - Kuwahara, Shuichi

AU - Hashimoto, Ko

PY - 2019/1/1

Y1 - 2019/1/1

N2 - In a series of studies, it is aimed to develop fillings for holes formed by pulling-out piles. Cement-bentonite is used as a filling in general. Although cement-bentonite has an advantage of being able to perform blending according to circumstance of work on site, cement and water cause segregation, so uniform filling is difficult. In addition, there is a disadvantage that cement-bentonite cannot perform a predetermined strength when diluted by penetration of groundwater and so on. Sodium carbonate (Na2CO3) is a substance expected to suppress the segregation of cement-bentonite and to speed up the development of strength. In this study, we conducted an indoor mixing test on fillings mixed with Na2CO3 into cement-bentonite which is a mixture consisting of water, cement and bentonite, and examined various characteristics from the viewpoint of physical and chemical aspects. The following two points were clarified; (i) by mixing Na2CO3, bleeding of cement-bentonite is suppressed and (ii) by mixing Na2CO3, the strength development time of the cement-bentonite becomes faster and the long-term strength also increases. These two points are considered to be due to the improvement of the swelling property of bentonite, the early strength development of cement and the formation of calcium carbonate (CaCO3).

AB - In a series of studies, it is aimed to develop fillings for holes formed by pulling-out piles. Cement-bentonite is used as a filling in general. Although cement-bentonite has an advantage of being able to perform blending according to circumstance of work on site, cement and water cause segregation, so uniform filling is difficult. In addition, there is a disadvantage that cement-bentonite cannot perform a predetermined strength when diluted by penetration of groundwater and so on. Sodium carbonate (Na2CO3) is a substance expected to suppress the segregation of cement-bentonite and to speed up the development of strength. In this study, we conducted an indoor mixing test on fillings mixed with Na2CO3 into cement-bentonite which is a mixture consisting of water, cement and bentonite, and examined various characteristics from the viewpoint of physical and chemical aspects. The following two points were clarified; (i) by mixing Na2CO3, bleeding of cement-bentonite is suppressed and (ii) by mixing Na2CO3, the strength development time of the cement-bentonite becomes faster and the long-term strength also increases. These two points are considered to be due to the improvement of the swelling property of bentonite, the early strength development of cement and the formation of calcium carbonate (CaCO3).

KW - Bleeding

KW - Cement bentonite

KW - Early strength

KW - Sodium carbonate

UR - http://www.scopus.com/inward/record.url?scp=85071516791&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85071516791&partnerID=8YFLogxK

U2 - 10.2472/jsms.68.572

DO - 10.2472/jsms.68.572

M3 - Article

AN - SCOPUS:85071516791

VL - 68

SP - 572

EP - 577

JO - Zairyo/Journal of the Society of Materials Science, Japan

JF - Zairyo/Journal of the Society of Materials Science, Japan

SN - 0514-5163

IS - 7

ER -