Compressive deformation simulation of regularly cell-structured materials with various column connectivity

Kanyatip Tantikom, Tatsuhiko Aizawa

Research output: Contribution to journalArticle

4 Citations (Scopus)

Abstract

A finite element method is developed to understand the in-plane, quasi-static compressive deformation mechanism and to predict elasto-plastic stress-strain responses of regularly cell-structured honeycombs. Temporal evolution of geometric configuration is also observed in series in order to understand its deformed pattern. Elasto-plastic model predicts quantitatively the compression behavior of copper cell-structured materials. Fairly good agreement with experimental results assures the validity of the present approach. Four different cell geometries are employed to discuss the effect of column-connectivity in a unit cell on the initial and shear localization behavior of cellular materials. In the case of cellular materials with four-edge connectivity, their initial and post-yielding behaviors are governed by buckling and bending deformation of one selected column. In the case of six-edge connected cellular materials, a set of columns is selected among six in the unit cell to make buckling and bending deformation in the dependent manner on loading directions. This leads to plastic anisotropy of this type of cellular materials.

Original languageEnglish
Pages (from-to)1154-1160
Number of pages7
JournalMaterials Transactions
Volume46
Issue number6
DOIs
Publication statusPublished - 2005 Jun
Externally publishedYes

Fingerprint

foams
cells
Bending (deformation)
buckling
Plastics
simulation
Buckling
plastics
plastic anisotropy
Copper
finite element method
Compaction
Anisotropy
shear
Finite element method
copper
Geometry
geometry
configurations

Keywords

  • Cell-structured materials
  • Column-connectivity
  • Compressive deformation
  • Elasto-plastic analysis
  • Initial yielding
  • Plastic anisotropy
  • Post-yielding
  • Shear localization

ASJC Scopus subject areas

  • Materials Science(all)
  • Metals and Alloys

Cite this

Compressive deformation simulation of regularly cell-structured materials with various column connectivity. / Tantikom, Kanyatip; Aizawa, Tatsuhiko.

In: Materials Transactions, Vol. 46, No. 6, 06.2005, p. 1154-1160.

Research output: Contribution to journalArticle

Tantikom, Kanyatip ; Aizawa, Tatsuhiko. / Compressive deformation simulation of regularly cell-structured materials with various column connectivity. In: Materials Transactions. 2005 ; Vol. 46, No. 6. pp. 1154-1160.
@article{70331e07f5b0489dada84a23401a40c0,
title = "Compressive deformation simulation of regularly cell-structured materials with various column connectivity",
abstract = "A finite element method is developed to understand the in-plane, quasi-static compressive deformation mechanism and to predict elasto-plastic stress-strain responses of regularly cell-structured honeycombs. Temporal evolution of geometric configuration is also observed in series in order to understand its deformed pattern. Elasto-plastic model predicts quantitatively the compression behavior of copper cell-structured materials. Fairly good agreement with experimental results assures the validity of the present approach. Four different cell geometries are employed to discuss the effect of column-connectivity in a unit cell on the initial and shear localization behavior of cellular materials. In the case of cellular materials with four-edge connectivity, their initial and post-yielding behaviors are governed by buckling and bending deformation of one selected column. In the case of six-edge connected cellular materials, a set of columns is selected among six in the unit cell to make buckling and bending deformation in the dependent manner on loading directions. This leads to plastic anisotropy of this type of cellular materials.",
keywords = "Cell-structured materials, Column-connectivity, Compressive deformation, Elasto-plastic analysis, Initial yielding, Plastic anisotropy, Post-yielding, Shear localization",
author = "Kanyatip Tantikom and Tatsuhiko Aizawa",
year = "2005",
month = "6",
doi = "10.2320/matertrans.46.1154",
language = "English",
volume = "46",
pages = "1154--1160",
journal = "Materials Transactions",
issn = "1345-9678",
publisher = "Japan Institute of Metals (JIM)",
number = "6",

}

TY - JOUR

T1 - Compressive deformation simulation of regularly cell-structured materials with various column connectivity

AU - Tantikom, Kanyatip

AU - Aizawa, Tatsuhiko

PY - 2005/6

Y1 - 2005/6

N2 - A finite element method is developed to understand the in-plane, quasi-static compressive deformation mechanism and to predict elasto-plastic stress-strain responses of regularly cell-structured honeycombs. Temporal evolution of geometric configuration is also observed in series in order to understand its deformed pattern. Elasto-plastic model predicts quantitatively the compression behavior of copper cell-structured materials. Fairly good agreement with experimental results assures the validity of the present approach. Four different cell geometries are employed to discuss the effect of column-connectivity in a unit cell on the initial and shear localization behavior of cellular materials. In the case of cellular materials with four-edge connectivity, their initial and post-yielding behaviors are governed by buckling and bending deformation of one selected column. In the case of six-edge connected cellular materials, a set of columns is selected among six in the unit cell to make buckling and bending deformation in the dependent manner on loading directions. This leads to plastic anisotropy of this type of cellular materials.

AB - A finite element method is developed to understand the in-plane, quasi-static compressive deformation mechanism and to predict elasto-plastic stress-strain responses of regularly cell-structured honeycombs. Temporal evolution of geometric configuration is also observed in series in order to understand its deformed pattern. Elasto-plastic model predicts quantitatively the compression behavior of copper cell-structured materials. Fairly good agreement with experimental results assures the validity of the present approach. Four different cell geometries are employed to discuss the effect of column-connectivity in a unit cell on the initial and shear localization behavior of cellular materials. In the case of cellular materials with four-edge connectivity, their initial and post-yielding behaviors are governed by buckling and bending deformation of one selected column. In the case of six-edge connected cellular materials, a set of columns is selected among six in the unit cell to make buckling and bending deformation in the dependent manner on loading directions. This leads to plastic anisotropy of this type of cellular materials.

KW - Cell-structured materials

KW - Column-connectivity

KW - Compressive deformation

KW - Elasto-plastic analysis

KW - Initial yielding

KW - Plastic anisotropy

KW - Post-yielding

KW - Shear localization

UR - http://www.scopus.com/inward/record.url?scp=23744474580&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=23744474580&partnerID=8YFLogxK

U2 - 10.2320/matertrans.46.1154

DO - 10.2320/matertrans.46.1154

M3 - Article

AN - SCOPUS:23744474580

VL - 46

SP - 1154

EP - 1160

JO - Materials Transactions

JF - Materials Transactions

SN - 1345-9678

IS - 6

ER -