Continuous transition of deformation mode in Fe-30Mn-5Si-lAl alloy

Motomichi Koyama, Takahiro Sawaguchi, Kazuyuki Ogawa, Takehiko Kikuchi, Masato Murakami

Research output: Contribution to journalArticle

3 Citations (Scopus)

Abstract

Deformation modes at various stages of plastic deformation have been investigated at identical locations in an Fe-30Mn-5Si-1A1 (mass%) alloy specimen, which exhibits a good shape memory effect associated with FCC (7) →HCP (ε) martensitic transformation and relatively high ductility caused by deformation twinning. The surface relief caused by γ→ε martensitic transformation, deformation twinning and slip band formation has been analyzed by measuring surface tilt angles corresponding to each deformation mode by atomic force microscopy. Although ε-martensitic transformation is the dominant deformation mode in the early deformation stage, a part of the E-martensite plates changes to deformation twins with the increase of deformation volume. Slip deformation also occurs inside the same region under excessive strain. The continuous transition of these deformation modes also occurs in the other grains in the same order: ε martensite→deformation twins→slip bands.

Original languageEnglish
Pages (from-to)174-179
Number of pages6
JournalNippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals
Volume73
Issue number3
DOIs
Publication statusPublished - 2009 Mar

Fingerprint

Martensitic transformations
martensitic transformation
Twinning
twinning
edge dislocations
martensite
ductility
Shape memory effect
Martensite
plastic deformation
Ductility
Atomic force microscopy
Plastic deformation
slip
atomic force microscopy

Keywords

  • Atomic force microscope
  • Shape memory
  • Slip deformation
  • Stress induced martensitic transformation
  • Twinning deformation
  • Twinning induced plasticity

ASJC Scopus subject areas

  • Mechanics of Materials
  • Materials Chemistry
  • Metals and Alloys
  • Condensed Matter Physics

Cite this

Continuous transition of deformation mode in Fe-30Mn-5Si-lAl alloy. / Koyama, Motomichi; Sawaguchi, Takahiro; Ogawa, Kazuyuki; Kikuchi, Takehiko; Murakami, Masato.

In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals, Vol. 73, No. 3, 03.2009, p. 174-179.

Research output: Contribution to journalArticle

Koyama, Motomichi ; Sawaguchi, Takahiro ; Ogawa, Kazuyuki ; Kikuchi, Takehiko ; Murakami, Masato. / Continuous transition of deformation mode in Fe-30Mn-5Si-lAl alloy. In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 2009 ; Vol. 73, No. 3. pp. 174-179.
@article{aa5668b2616c48a88e314bf3e85b29b6,
title = "Continuous transition of deformation mode in Fe-30Mn-5Si-lAl alloy",
abstract = "Deformation modes at various stages of plastic deformation have been investigated at identical locations in an Fe-30Mn-5Si-1A1 (mass{\%}) alloy specimen, which exhibits a good shape memory effect associated with FCC (7) →HCP (ε) martensitic transformation and relatively high ductility caused by deformation twinning. The surface relief caused by γ→ε martensitic transformation, deformation twinning and slip band formation has been analyzed by measuring surface tilt angles corresponding to each deformation mode by atomic force microscopy. Although ε-martensitic transformation is the dominant deformation mode in the early deformation stage, a part of the E-martensite plates changes to deformation twins with the increase of deformation volume. Slip deformation also occurs inside the same region under excessive strain. The continuous transition of these deformation modes also occurs in the other grains in the same order: ε martensite→deformation twins→slip bands.",
keywords = "Atomic force microscope, Shape memory, Slip deformation, Stress induced martensitic transformation, Twinning deformation, Twinning induced plasticity",
author = "Motomichi Koyama and Takahiro Sawaguchi and Kazuyuki Ogawa and Takehiko Kikuchi and Masato Murakami",
year = "2009",
month = "3",
doi = "10.2320/jinstmet.73.174",
language = "English",
volume = "73",
pages = "174--179",
journal = "Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals",
issn = "0021-4876",
publisher = "Japan Institute of Metals (JIM)",
number = "3",

}

TY - JOUR

T1 - Continuous transition of deformation mode in Fe-30Mn-5Si-lAl alloy

AU - Koyama, Motomichi

AU - Sawaguchi, Takahiro

AU - Ogawa, Kazuyuki

AU - Kikuchi, Takehiko

AU - Murakami, Masato

PY - 2009/3

Y1 - 2009/3

N2 - Deformation modes at various stages of plastic deformation have been investigated at identical locations in an Fe-30Mn-5Si-1A1 (mass%) alloy specimen, which exhibits a good shape memory effect associated with FCC (7) →HCP (ε) martensitic transformation and relatively high ductility caused by deformation twinning. The surface relief caused by γ→ε martensitic transformation, deformation twinning and slip band formation has been analyzed by measuring surface tilt angles corresponding to each deformation mode by atomic force microscopy. Although ε-martensitic transformation is the dominant deformation mode in the early deformation stage, a part of the E-martensite plates changes to deformation twins with the increase of deformation volume. Slip deformation also occurs inside the same region under excessive strain. The continuous transition of these deformation modes also occurs in the other grains in the same order: ε martensite→deformation twins→slip bands.

AB - Deformation modes at various stages of plastic deformation have been investigated at identical locations in an Fe-30Mn-5Si-1A1 (mass%) alloy specimen, which exhibits a good shape memory effect associated with FCC (7) →HCP (ε) martensitic transformation and relatively high ductility caused by deformation twinning. The surface relief caused by γ→ε martensitic transformation, deformation twinning and slip band formation has been analyzed by measuring surface tilt angles corresponding to each deformation mode by atomic force microscopy. Although ε-martensitic transformation is the dominant deformation mode in the early deformation stage, a part of the E-martensite plates changes to deformation twins with the increase of deformation volume. Slip deformation also occurs inside the same region under excessive strain. The continuous transition of these deformation modes also occurs in the other grains in the same order: ε martensite→deformation twins→slip bands.

KW - Atomic force microscope

KW - Shape memory

KW - Slip deformation

KW - Stress induced martensitic transformation

KW - Twinning deformation

KW - Twinning induced plasticity

UR - http://www.scopus.com/inward/record.url?scp=66149139153&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=66149139153&partnerID=8YFLogxK

U2 - 10.2320/jinstmet.73.174

DO - 10.2320/jinstmet.73.174

M3 - Article

VL - 73

SP - 174

EP - 179

JO - Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals

JF - Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals

SN - 0021-4876

IS - 3

ER -