Controlled voltage source vector control for switched reluctance motors using PWM method

Noriya Nakao, Kan Akatsu

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

This paper proposes controlled voltage source (CVS) vector control for switched reluctance motors (SRMs) using the PWM method. This proposed technique can achieve high controllability for variable speed drives, low current ripple and low noise operation, and high motor efficiency at high speed. Moreover, its implementation is easy because the controller design does not require complicated offline data such as the magnetization characteristics. To verify the effectiveness, an experiment was conducted to compare the performances of the proposed technique and a conventional unipolar drive using the hysteresis comparator method.

Original languageEnglish
Pages (from-to)999-1008
Number of pages10
JournalIEEJ Transactions on Industry Applications
Volume135
Issue number10
DOIs
Publication statusPublished - 2015 Oct 1

Fingerprint

Variable speed drives
Reluctance motors
Controllability
Pulse width modulation
Hysteresis
Magnetization
Controllers
Electric potential
Experiments

Keywords

  • Hysteresis comparator
  • PWM
  • Switched reluctance motor
  • Unipolar drive
  • Vector control

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Industrial and Manufacturing Engineering

Cite this

Controlled voltage source vector control for switched reluctance motors using PWM method. / Nakao, Noriya; Akatsu, Kan.

In: IEEJ Transactions on Industry Applications, Vol. 135, No. 10, 01.10.2015, p. 999-1008.

Research output: Contribution to journalArticle

@article{67afb29b2ed54a6b8c25e5b0a65d1780,
title = "Controlled voltage source vector control for switched reluctance motors using PWM method",
abstract = "This paper proposes controlled voltage source (CVS) vector control for switched reluctance motors (SRMs) using the PWM method. This proposed technique can achieve high controllability for variable speed drives, low current ripple and low noise operation, and high motor efficiency at high speed. Moreover, its implementation is easy because the controller design does not require complicated offline data such as the magnetization characteristics. To verify the effectiveness, an experiment was conducted to compare the performances of the proposed technique and a conventional unipolar drive using the hysteresis comparator method.",
keywords = "Hysteresis comparator, PWM, Switched reluctance motor, Unipolar drive, Vector control",
author = "Noriya Nakao and Kan Akatsu",
year = "2015",
month = "10",
day = "1",
doi = "10.1541/ieejias.135.999",
language = "English",
volume = "135",
pages = "999--1008",
journal = "IEEJ Transactions on Industry Applications",
issn = "0913-6339",
publisher = "The Institute of Electrical Engineers of Japan",
number = "10",

}

TY - JOUR

T1 - Controlled voltage source vector control for switched reluctance motors using PWM method

AU - Nakao, Noriya

AU - Akatsu, Kan

PY - 2015/10/1

Y1 - 2015/10/1

N2 - This paper proposes controlled voltage source (CVS) vector control for switched reluctance motors (SRMs) using the PWM method. This proposed technique can achieve high controllability for variable speed drives, low current ripple and low noise operation, and high motor efficiency at high speed. Moreover, its implementation is easy because the controller design does not require complicated offline data such as the magnetization characteristics. To verify the effectiveness, an experiment was conducted to compare the performances of the proposed technique and a conventional unipolar drive using the hysteresis comparator method.

AB - This paper proposes controlled voltage source (CVS) vector control for switched reluctance motors (SRMs) using the PWM method. This proposed technique can achieve high controllability for variable speed drives, low current ripple and low noise operation, and high motor efficiency at high speed. Moreover, its implementation is easy because the controller design does not require complicated offline data such as the magnetization characteristics. To verify the effectiveness, an experiment was conducted to compare the performances of the proposed technique and a conventional unipolar drive using the hysteresis comparator method.

KW - Hysteresis comparator

KW - PWM

KW - Switched reluctance motor

KW - Unipolar drive

KW - Vector control

UR - http://www.scopus.com/inward/record.url?scp=84943543052&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84943543052&partnerID=8YFLogxK

U2 - 10.1541/ieejias.135.999

DO - 10.1541/ieejias.135.999

M3 - Article

AN - SCOPUS:84943543052

VL - 135

SP - 999

EP - 1008

JO - IEEJ Transactions on Industry Applications

JF - IEEJ Transactions on Industry Applications

SN - 0913-6339

IS - 10

ER -