Corrosion simulation of carbon steels in atmospheric environment

Hideki Katayama, Kazuhiko Noda, Hiroyuki Masuda, Makoto Nagasawa, Masayuki Itagaki, Kunihiro Watanabe

Research output: Contribution to journalArticle

26 Citations (Scopus)

Abstract

Atmospheric corrosion simulation of carbon steels has been performed in order to clarify the atmospheric corrosion mechanism of carbon steel. The corrosion simulation was conducted in a chamber by controlling the environmental factors such as temperature, relative humidity and temperature of carbon steels. When the corrosion simulation was conducted using only the data of temperature and relative humidity, although the carbon steel in the corrosion simulation showed almost the same corrosion behavior as that in outdoor environment, the corroded area of the former was smaller than that of the latter. In order to simulate dew condensation, the temperature of carbon steel was controlled by a cooling-system. As a result of the corrosion simulation, both the corrosion behavior and the corroded area were almost the same as those in outdoor environment. It was concluded that the initial atmospheric corrosion of carbon steel in the shielded environment could be simulated in the chamber by controlling the temperature, the relative humidity and the temperature of materials.

Original languageEnglish
Pages (from-to)2599-2606
Number of pages8
JournalCorrosion Science
Volume47
Issue number10
DOIs
Publication statusPublished - 2005 Oct
Externally publishedYes

Fingerprint

Carbon steel
Corrosion
Atmospheric corrosion
Atmospheric humidity
Temperature
Cooling systems
Condensation

Keywords

  • Atmospheric corrosion
  • Carbon steel
  • Dew condensation
  • Simulation

ASJC Scopus subject areas

  • Materials Science(all)
  • Metals and Alloys

Cite this

Katayama, H., Noda, K., Masuda, H., Nagasawa, M., Itagaki, M., & Watanabe, K. (2005). Corrosion simulation of carbon steels in atmospheric environment. Corrosion Science, 47(10), 2599-2606. https://doi.org/10.1016/j.corsci.2004.10.012

Corrosion simulation of carbon steels in atmospheric environment. / Katayama, Hideki; Noda, Kazuhiko; Masuda, Hiroyuki; Nagasawa, Makoto; Itagaki, Masayuki; Watanabe, Kunihiro.

In: Corrosion Science, Vol. 47, No. 10, 10.2005, p. 2599-2606.

Research output: Contribution to journalArticle

Katayama, H, Noda, K, Masuda, H, Nagasawa, M, Itagaki, M & Watanabe, K 2005, 'Corrosion simulation of carbon steels in atmospheric environment', Corrosion Science, vol. 47, no. 10, pp. 2599-2606. https://doi.org/10.1016/j.corsci.2004.10.012
Katayama, Hideki ; Noda, Kazuhiko ; Masuda, Hiroyuki ; Nagasawa, Makoto ; Itagaki, Masayuki ; Watanabe, Kunihiro. / Corrosion simulation of carbon steels in atmospheric environment. In: Corrosion Science. 2005 ; Vol. 47, No. 10. pp. 2599-2606.
@article{053251f2c8714f05a2252198dee25034,
title = "Corrosion simulation of carbon steels in atmospheric environment",
abstract = "Atmospheric corrosion simulation of carbon steels has been performed in order to clarify the atmospheric corrosion mechanism of carbon steel. The corrosion simulation was conducted in a chamber by controlling the environmental factors such as temperature, relative humidity and temperature of carbon steels. When the corrosion simulation was conducted using only the data of temperature and relative humidity, although the carbon steel in the corrosion simulation showed almost the same corrosion behavior as that in outdoor environment, the corroded area of the former was smaller than that of the latter. In order to simulate dew condensation, the temperature of carbon steel was controlled by a cooling-system. As a result of the corrosion simulation, both the corrosion behavior and the corroded area were almost the same as those in outdoor environment. It was concluded that the initial atmospheric corrosion of carbon steel in the shielded environment could be simulated in the chamber by controlling the temperature, the relative humidity and the temperature of materials.",
keywords = "Atmospheric corrosion, Carbon steel, Dew condensation, Simulation",
author = "Hideki Katayama and Kazuhiko Noda and Hiroyuki Masuda and Makoto Nagasawa and Masayuki Itagaki and Kunihiro Watanabe",
year = "2005",
month = "10",
doi = "10.1016/j.corsci.2004.10.012",
language = "English",
volume = "47",
pages = "2599--2606",
journal = "Corrosion Science",
issn = "0010-938X",
publisher = "Elsevier Limited",
number = "10",

}

TY - JOUR

T1 - Corrosion simulation of carbon steels in atmospheric environment

AU - Katayama, Hideki

AU - Noda, Kazuhiko

AU - Masuda, Hiroyuki

AU - Nagasawa, Makoto

AU - Itagaki, Masayuki

AU - Watanabe, Kunihiro

PY - 2005/10

Y1 - 2005/10

N2 - Atmospheric corrosion simulation of carbon steels has been performed in order to clarify the atmospheric corrosion mechanism of carbon steel. The corrosion simulation was conducted in a chamber by controlling the environmental factors such as temperature, relative humidity and temperature of carbon steels. When the corrosion simulation was conducted using only the data of temperature and relative humidity, although the carbon steel in the corrosion simulation showed almost the same corrosion behavior as that in outdoor environment, the corroded area of the former was smaller than that of the latter. In order to simulate dew condensation, the temperature of carbon steel was controlled by a cooling-system. As a result of the corrosion simulation, both the corrosion behavior and the corroded area were almost the same as those in outdoor environment. It was concluded that the initial atmospheric corrosion of carbon steel in the shielded environment could be simulated in the chamber by controlling the temperature, the relative humidity and the temperature of materials.

AB - Atmospheric corrosion simulation of carbon steels has been performed in order to clarify the atmospheric corrosion mechanism of carbon steel. The corrosion simulation was conducted in a chamber by controlling the environmental factors such as temperature, relative humidity and temperature of carbon steels. When the corrosion simulation was conducted using only the data of temperature and relative humidity, although the carbon steel in the corrosion simulation showed almost the same corrosion behavior as that in outdoor environment, the corroded area of the former was smaller than that of the latter. In order to simulate dew condensation, the temperature of carbon steel was controlled by a cooling-system. As a result of the corrosion simulation, both the corrosion behavior and the corroded area were almost the same as those in outdoor environment. It was concluded that the initial atmospheric corrosion of carbon steel in the shielded environment could be simulated in the chamber by controlling the temperature, the relative humidity and the temperature of materials.

KW - Atmospheric corrosion

KW - Carbon steel

KW - Dew condensation

KW - Simulation

UR - http://www.scopus.com/inward/record.url?scp=24344467490&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=24344467490&partnerID=8YFLogxK

U2 - 10.1016/j.corsci.2004.10.012

DO - 10.1016/j.corsci.2004.10.012

M3 - Article

AN - SCOPUS:24344467490

VL - 47

SP - 2599

EP - 2606

JO - Corrosion Science

JF - Corrosion Science

SN - 0010-938X

IS - 10

ER -