Deformation mechanisms of a micro-sized austenitic stainless steel with fine grains

G. P. Zhang, K. Takashima, Masayuki Shimojo, Y. Higo

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

In this study, deformation behavior of fine-grained austenitic stainless steel micro-cantilever beams was investigated using a newly developed testing machine for micro-sized specimens. The microbeams were deformed to different strain hardening stages of the material, and then the detailed deformation behavior on the specimen surface at the corresponding strain hardening stage was examined by scanning electron microscopy. Two deformation mechanisms corresponding to different strain hardening stages were found in the micro-sized austenitic stainless steel with fine grains. The dislocation slip mechanism characterized by the extensive dislocation slips and their interaction with grain boundaries resulted in the stage I strain hardening. With increasing deformation, the grain boundary sliding (GBS) mechanism at the stage II and subsequently intergranular cracking occurred. The differences in stress condition and work-hardening behavior on the top tension-side and rear compression-side surfaces of the micro-cantilever beam resulted in the different deformation behavior.

Original languageEnglish
Title of host publicationMaterials Research Society Symposium - Proceedings
EditorsH Kahn, M Boer, M Judy, S Spearing
Volume657
Publication statusPublished - 2001
Externally publishedYes
EventMaterial Science of Microelectromechanical Systems (MEMS) Devices III - Boston, MA, United States
Duration: 2000 Nov 272000 Nov 28

Other

OtherMaterial Science of Microelectromechanical Systems (MEMS) Devices III
CountryUnited States
CityBoston, MA
Period00/11/2700/11/28

Fingerprint

Austenitic stainless steel
Strain hardening
Cantilever beams
Grain boundary sliding
Dislocations (crystals)
Grain boundaries
Scanning electron microscopy
Testing

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials

Cite this

Zhang, G. P., Takashima, K., Shimojo, M., & Higo, Y. (2001). Deformation mechanisms of a micro-sized austenitic stainless steel with fine grains. In H. Kahn, M. Boer, M. Judy, & S. Spearing (Eds.), Materials Research Society Symposium - Proceedings (Vol. 657)

Deformation mechanisms of a micro-sized austenitic stainless steel with fine grains. / Zhang, G. P.; Takashima, K.; Shimojo, Masayuki; Higo, Y.

Materials Research Society Symposium - Proceedings. ed. / H Kahn; M Boer; M Judy; S Spearing. Vol. 657 2001.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Zhang, GP, Takashima, K, Shimojo, M & Higo, Y 2001, Deformation mechanisms of a micro-sized austenitic stainless steel with fine grains. in H Kahn, M Boer, M Judy & S Spearing (eds), Materials Research Society Symposium - Proceedings. vol. 657, Material Science of Microelectromechanical Systems (MEMS) Devices III, Boston, MA, United States, 00/11/27.
Zhang GP, Takashima K, Shimojo M, Higo Y. Deformation mechanisms of a micro-sized austenitic stainless steel with fine grains. In Kahn H, Boer M, Judy M, Spearing S, editors, Materials Research Society Symposium - Proceedings. Vol. 657. 2001
Zhang, G. P. ; Takashima, K. ; Shimojo, Masayuki ; Higo, Y. / Deformation mechanisms of a micro-sized austenitic stainless steel with fine grains. Materials Research Society Symposium - Proceedings. editor / H Kahn ; M Boer ; M Judy ; S Spearing. Vol. 657 2001.
@inproceedings{66c327d53de840d282238a6d98449ca0,
title = "Deformation mechanisms of a micro-sized austenitic stainless steel with fine grains",
abstract = "In this study, deformation behavior of fine-grained austenitic stainless steel micro-cantilever beams was investigated using a newly developed testing machine for micro-sized specimens. The microbeams were deformed to different strain hardening stages of the material, and then the detailed deformation behavior on the specimen surface at the corresponding strain hardening stage was examined by scanning electron microscopy. Two deformation mechanisms corresponding to different strain hardening stages were found in the micro-sized austenitic stainless steel with fine grains. The dislocation slip mechanism characterized by the extensive dislocation slips and their interaction with grain boundaries resulted in the stage I strain hardening. With increasing deformation, the grain boundary sliding (GBS) mechanism at the stage II and subsequently intergranular cracking occurred. The differences in stress condition and work-hardening behavior on the top tension-side and rear compression-side surfaces of the micro-cantilever beam resulted in the different deformation behavior.",
author = "Zhang, {G. P.} and K. Takashima and Masayuki Shimojo and Y. Higo",
year = "2001",
language = "English",
volume = "657",
editor = "H Kahn and M Boer and M Judy and S Spearing",
booktitle = "Materials Research Society Symposium - Proceedings",

}

TY - GEN

T1 - Deformation mechanisms of a micro-sized austenitic stainless steel with fine grains

AU - Zhang, G. P.

AU - Takashima, K.

AU - Shimojo, Masayuki

AU - Higo, Y.

PY - 2001

Y1 - 2001

N2 - In this study, deformation behavior of fine-grained austenitic stainless steel micro-cantilever beams was investigated using a newly developed testing machine for micro-sized specimens. The microbeams were deformed to different strain hardening stages of the material, and then the detailed deformation behavior on the specimen surface at the corresponding strain hardening stage was examined by scanning electron microscopy. Two deformation mechanisms corresponding to different strain hardening stages were found in the micro-sized austenitic stainless steel with fine grains. The dislocation slip mechanism characterized by the extensive dislocation slips and their interaction with grain boundaries resulted in the stage I strain hardening. With increasing deformation, the grain boundary sliding (GBS) mechanism at the stage II and subsequently intergranular cracking occurred. The differences in stress condition and work-hardening behavior on the top tension-side and rear compression-side surfaces of the micro-cantilever beam resulted in the different deformation behavior.

AB - In this study, deformation behavior of fine-grained austenitic stainless steel micro-cantilever beams was investigated using a newly developed testing machine for micro-sized specimens. The microbeams were deformed to different strain hardening stages of the material, and then the detailed deformation behavior on the specimen surface at the corresponding strain hardening stage was examined by scanning electron microscopy. Two deformation mechanisms corresponding to different strain hardening stages were found in the micro-sized austenitic stainless steel with fine grains. The dislocation slip mechanism characterized by the extensive dislocation slips and their interaction with grain boundaries resulted in the stage I strain hardening. With increasing deformation, the grain boundary sliding (GBS) mechanism at the stage II and subsequently intergranular cracking occurred. The differences in stress condition and work-hardening behavior on the top tension-side and rear compression-side surfaces of the micro-cantilever beam resulted in the different deformation behavior.

UR - http://www.scopus.com/inward/record.url?scp=18844465531&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=18844465531&partnerID=8YFLogxK

M3 - Conference contribution

VL - 657

BT - Materials Research Society Symposium - Proceedings

A2 - Kahn, H

A2 - Boer, M

A2 - Judy, M

A2 - Spearing, S

ER -