Determination of glucose concentration by electroluminescence of an indium-tin oxide electrode

T. Miyasaka, Y. Jinbo, K. Sakai, Yasuo Yoshimi

Research output: Contribution to journalArticle

3 Citations (Scopus)

Abstract

Glucose reacts with glucose oxidase to form gluconolactone and hydrogen peroxide (H2O2), and the glucose concentration may be determined indirectly from the amount of hydrogen peroxide produced. The authors have developed a method of H2O2 assay that uses the electroluminescence (EL) of indium-tin oxide (ITO). Since this method depends on a reversible reaction of the ITO itself, it does not require the addition of an emitting substance, allowing convenient continuous monitoring of the anylates. In the present work the triangular-wave potential was set at 0 - +1.4 - 0V against the Ag/AgCl reference electrode, and swept at a rate of 200 mVs-1. The integrated number of photons was taken as the electroluminescence intensity, and its response to changes in H2O2 concentration was investigated. As a result a value that was dependent on H2O2 concentration was obtained. Electroluminescence intensity was measured varying the pH of the test solution from 7 to 13 with a Britton-Robinson buffer solution, and it was found that electroluminescence intensity was constant at pH9 and above. When glucose and glucose oxidase were mixed in the test solution, measurements of electroluminescence intensity showed a good correlation with glucose concentration.

Original languageEnglish
Pages (from-to)102-106
Number of pages5
JournalFood and Bioproducts Processing: Transactions of the Institution of of Chemical Engineers, Part C
Volume76
Issue number2
Publication statusPublished - 1998 Jun

Fingerprint

Electroluminescence
Tin oxides
Indium
electrodes
Glucose
glucose
Electrodes
glucose oxidase
Glucose Oxidase
Glucose oxidase
Hydrogen peroxide
Hydrogen Peroxide
hydrogen peroxide
gluconolactone
Assays
Buffers
buffers
Photons
testing
indium tin oxide

Keywords

  • Electroluminescence
  • Glucose
  • Glucose oxidase
  • Hydrogen peroxide
  • Indium-tin oxide electrode

ASJC Scopus subject areas

  • Food Science
  • Biotechnology
  • Chemical Engineering(all)

Cite this

@article{7500fe3e1186435a9c26b03ab74fe635,
title = "Determination of glucose concentration by electroluminescence of an indium-tin oxide electrode",
abstract = "Glucose reacts with glucose oxidase to form gluconolactone and hydrogen peroxide (H2O2), and the glucose concentration may be determined indirectly from the amount of hydrogen peroxide produced. The authors have developed a method of H2O2 assay that uses the electroluminescence (EL) of indium-tin oxide (ITO). Since this method depends on a reversible reaction of the ITO itself, it does not require the addition of an emitting substance, allowing convenient continuous monitoring of the anylates. In the present work the triangular-wave potential was set at 0 - +1.4 - 0V against the Ag/AgCl reference electrode, and swept at a rate of 200 mVs-1. The integrated number of photons was taken as the electroluminescence intensity, and its response to changes in H2O2 concentration was investigated. As a result a value that was dependent on H2O2 concentration was obtained. Electroluminescence intensity was measured varying the pH of the test solution from 7 to 13 with a Britton-Robinson buffer solution, and it was found that electroluminescence intensity was constant at pH9 and above. When glucose and glucose oxidase were mixed in the test solution, measurements of electroluminescence intensity showed a good correlation with glucose concentration.",
keywords = "Electroluminescence, Glucose, Glucose oxidase, Hydrogen peroxide, Indium-tin oxide electrode",
author = "T. Miyasaka and Y. Jinbo and K. Sakai and Yasuo Yoshimi",
year = "1998",
month = "6",
language = "English",
volume = "76",
pages = "102--106",
journal = "Food and Bioproducts Processing",
issn = "0960-3085",
publisher = "Institution of Chemical Engineers",
number = "2",

}

TY - JOUR

T1 - Determination of glucose concentration by electroluminescence of an indium-tin oxide electrode

AU - Miyasaka, T.

AU - Jinbo, Y.

AU - Sakai, K.

AU - Yoshimi, Yasuo

PY - 1998/6

Y1 - 1998/6

N2 - Glucose reacts with glucose oxidase to form gluconolactone and hydrogen peroxide (H2O2), and the glucose concentration may be determined indirectly from the amount of hydrogen peroxide produced. The authors have developed a method of H2O2 assay that uses the electroluminescence (EL) of indium-tin oxide (ITO). Since this method depends on a reversible reaction of the ITO itself, it does not require the addition of an emitting substance, allowing convenient continuous monitoring of the anylates. In the present work the triangular-wave potential was set at 0 - +1.4 - 0V against the Ag/AgCl reference electrode, and swept at a rate of 200 mVs-1. The integrated number of photons was taken as the electroluminescence intensity, and its response to changes in H2O2 concentration was investigated. As a result a value that was dependent on H2O2 concentration was obtained. Electroluminescence intensity was measured varying the pH of the test solution from 7 to 13 with a Britton-Robinson buffer solution, and it was found that electroluminescence intensity was constant at pH9 and above. When glucose and glucose oxidase were mixed in the test solution, measurements of electroluminescence intensity showed a good correlation with glucose concentration.

AB - Glucose reacts with glucose oxidase to form gluconolactone and hydrogen peroxide (H2O2), and the glucose concentration may be determined indirectly from the amount of hydrogen peroxide produced. The authors have developed a method of H2O2 assay that uses the electroluminescence (EL) of indium-tin oxide (ITO). Since this method depends on a reversible reaction of the ITO itself, it does not require the addition of an emitting substance, allowing convenient continuous monitoring of the anylates. In the present work the triangular-wave potential was set at 0 - +1.4 - 0V against the Ag/AgCl reference electrode, and swept at a rate of 200 mVs-1. The integrated number of photons was taken as the electroluminescence intensity, and its response to changes in H2O2 concentration was investigated. As a result a value that was dependent on H2O2 concentration was obtained. Electroluminescence intensity was measured varying the pH of the test solution from 7 to 13 with a Britton-Robinson buffer solution, and it was found that electroluminescence intensity was constant at pH9 and above. When glucose and glucose oxidase were mixed in the test solution, measurements of electroluminescence intensity showed a good correlation with glucose concentration.

KW - Electroluminescence

KW - Glucose

KW - Glucose oxidase

KW - Hydrogen peroxide

KW - Indium-tin oxide electrode

UR - http://www.scopus.com/inward/record.url?scp=0032091657&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0032091657&partnerID=8YFLogxK

M3 - Article

VL - 76

SP - 102

EP - 106

JO - Food and Bioproducts Processing

JF - Food and Bioproducts Processing

SN - 0960-3085

IS - 2

ER -