Development of an innovative water machining system employing the electric rust preventive method - precise evaluation of purity of the refined water with a laser turbidity meter

Naohiro Nishikawa, Takekazu Sawa, Yoshihiro Hagihara, Nobuhito Yoshihara, Hiroaki Okawai, Toshirou Iyama, Masahiro Mizuno, Shinya Tsukamoto

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Green manufacturing is important subject. In order to reduce waste disposal cost and environmental load, decreasing machining fluid that contains several chemicals such as oil, extreme pressure agent etc. is demanded. In this investigation, the electric rust preventive machining method system that uses only water as machining fluid have been developed. This paper mentioned about evaluation of recycled water quality. The refined water that is purified with developed water recycle system which is installed reverse osmosis membrane (RO) is too clean to evaluate by normal method till now. Using laser turbidity meter, precise water purification is evaluated precisely. Therefore, it is clarified that RO refined water turbidity (RO1=0.0006, RO2=0.0003) is very low compared with clean tap water (0.1207). So, water recycle system can remove contaminating fine particle from water. It is expected that scratch less ultra precision machining with water is enabled to conduct with high filtration ability.

Original languageEnglish
Title of host publicationAdvanced Materials Research
Pages293-298
Number of pages6
Volume797
DOIs
Publication statusPublished - 2013
Event16th International Symposium on Advances in Abrasive Technology, ISAAT 2013 and 17th Chinese Conference of Abrasive Technology, CCAT 2013 - Hangzhou
Duration: 2013 Sep 232013 Sep 26

Publication series

NameAdvanced Materials Research
Volume797
ISSN (Print)10226680

Other

Other16th International Symposium on Advances in Abrasive Technology, ISAAT 2013 and 17th Chinese Conference of Abrasive Technology, CCAT 2013
CityHangzhou
Period13/9/2313/9/26

Fingerprint

Turbidity
Machining
Lasers
Water
Osmosis membranes
Reverse osmosis
Water meters
Fluids
Waste disposal
Water quality
Purification
Costs

Keywords

  • Electric rust preventive machining method
  • Green manufacturing
  • Laser turbidity meter
  • Purification
  • Removal
  • Reverse osmosis membrane
  • Turbidity
  • Water machining
  • Water recycle

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Nishikawa, N., Sawa, T., Hagihara, Y., Yoshihara, N., Okawai, H., Iyama, T., ... Tsukamoto, S. (2013). Development of an innovative water machining system employing the electric rust preventive method - precise evaluation of purity of the refined water with a laser turbidity meter. In Advanced Materials Research (Vol. 797, pp. 293-298). (Advanced Materials Research; Vol. 797). https://doi.org/10.4028/www.scientific.net/AMR.797.293

Development of an innovative water machining system employing the electric rust preventive method - precise evaluation of purity of the refined water with a laser turbidity meter. / Nishikawa, Naohiro; Sawa, Takekazu; Hagihara, Yoshihiro; Yoshihara, Nobuhito; Okawai, Hiroaki; Iyama, Toshirou; Mizuno, Masahiro; Tsukamoto, Shinya.

Advanced Materials Research. Vol. 797 2013. p. 293-298 (Advanced Materials Research; Vol. 797).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nishikawa, N, Sawa, T, Hagihara, Y, Yoshihara, N, Okawai, H, Iyama, T, Mizuno, M & Tsukamoto, S 2013, Development of an innovative water machining system employing the electric rust preventive method - precise evaluation of purity of the refined water with a laser turbidity meter. in Advanced Materials Research. vol. 797, Advanced Materials Research, vol. 797, pp. 293-298, 16th International Symposium on Advances in Abrasive Technology, ISAAT 2013 and 17th Chinese Conference of Abrasive Technology, CCAT 2013, Hangzhou, 13/9/23. https://doi.org/10.4028/www.scientific.net/AMR.797.293
Nishikawa, Naohiro ; Sawa, Takekazu ; Hagihara, Yoshihiro ; Yoshihara, Nobuhito ; Okawai, Hiroaki ; Iyama, Toshirou ; Mizuno, Masahiro ; Tsukamoto, Shinya. / Development of an innovative water machining system employing the electric rust preventive method - precise evaluation of purity of the refined water with a laser turbidity meter. Advanced Materials Research. Vol. 797 2013. pp. 293-298 (Advanced Materials Research).
@inproceedings{c5479a9c9c944da8801a22e23351c115,
title = "Development of an innovative water machining system employing the electric rust preventive method - precise evaluation of purity of the refined water with a laser turbidity meter",
abstract = "Green manufacturing is important subject. In order to reduce waste disposal cost and environmental load, decreasing machining fluid that contains several chemicals such as oil, extreme pressure agent etc. is demanded. In this investigation, the electric rust preventive machining method system that uses only water as machining fluid have been developed. This paper mentioned about evaluation of recycled water quality. The refined water that is purified with developed water recycle system which is installed reverse osmosis membrane (RO) is too clean to evaluate by normal method till now. Using laser turbidity meter, precise water purification is evaluated precisely. Therefore, it is clarified that RO refined water turbidity (RO1=0.0006, RO2=0.0003) is very low compared with clean tap water (0.1207). So, water recycle system can remove contaminating fine particle from water. It is expected that scratch less ultra precision machining with water is enabled to conduct with high filtration ability.",
keywords = "Electric rust preventive machining method, Green manufacturing, Laser turbidity meter, Purification, Removal, Reverse osmosis membrane, Turbidity, Water machining, Water recycle",
author = "Naohiro Nishikawa and Takekazu Sawa and Yoshihiro Hagihara and Nobuhito Yoshihara and Hiroaki Okawai and Toshirou Iyama and Masahiro Mizuno and Shinya Tsukamoto",
year = "2013",
doi = "10.4028/www.scientific.net/AMR.797.293",
language = "English",
isbn = "9783037858257",
volume = "797",
series = "Advanced Materials Research",
pages = "293--298",
booktitle = "Advanced Materials Research",

}

TY - GEN

T1 - Development of an innovative water machining system employing the electric rust preventive method - precise evaluation of purity of the refined water with a laser turbidity meter

AU - Nishikawa, Naohiro

AU - Sawa, Takekazu

AU - Hagihara, Yoshihiro

AU - Yoshihara, Nobuhito

AU - Okawai, Hiroaki

AU - Iyama, Toshirou

AU - Mizuno, Masahiro

AU - Tsukamoto, Shinya

PY - 2013

Y1 - 2013

N2 - Green manufacturing is important subject. In order to reduce waste disposal cost and environmental load, decreasing machining fluid that contains several chemicals such as oil, extreme pressure agent etc. is demanded. In this investigation, the electric rust preventive machining method system that uses only water as machining fluid have been developed. This paper mentioned about evaluation of recycled water quality. The refined water that is purified with developed water recycle system which is installed reverse osmosis membrane (RO) is too clean to evaluate by normal method till now. Using laser turbidity meter, precise water purification is evaluated precisely. Therefore, it is clarified that RO refined water turbidity (RO1=0.0006, RO2=0.0003) is very low compared with clean tap water (0.1207). So, water recycle system can remove contaminating fine particle from water. It is expected that scratch less ultra precision machining with water is enabled to conduct with high filtration ability.

AB - Green manufacturing is important subject. In order to reduce waste disposal cost and environmental load, decreasing machining fluid that contains several chemicals such as oil, extreme pressure agent etc. is demanded. In this investigation, the electric rust preventive machining method system that uses only water as machining fluid have been developed. This paper mentioned about evaluation of recycled water quality. The refined water that is purified with developed water recycle system which is installed reverse osmosis membrane (RO) is too clean to evaluate by normal method till now. Using laser turbidity meter, precise water purification is evaluated precisely. Therefore, it is clarified that RO refined water turbidity (RO1=0.0006, RO2=0.0003) is very low compared with clean tap water (0.1207). So, water recycle system can remove contaminating fine particle from water. It is expected that scratch less ultra precision machining with water is enabled to conduct with high filtration ability.

KW - Electric rust preventive machining method

KW - Green manufacturing

KW - Laser turbidity meter

KW - Purification

KW - Removal

KW - Reverse osmosis membrane

KW - Turbidity

KW - Water machining

KW - Water recycle

UR - http://www.scopus.com/inward/record.url?scp=84886885634&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84886885634&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/AMR.797.293

DO - 10.4028/www.scientific.net/AMR.797.293

M3 - Conference contribution

AN - SCOPUS:84886885634

SN - 9783037858257

VL - 797

T3 - Advanced Materials Research

SP - 293

EP - 298

BT - Advanced Materials Research

ER -