Dry deep drawability of A5052 aluminum alloy sheet with DLC-coating

Takaaki Horiuchi, Shoichiro Yoshihara, Yu Iriyama

Research output: Contribution to journalArticle

13 Citations (Scopus)

Abstract

In the press forming, dry press forming would be required for environmental problem. In this study, a diamond-like-carbon (DLC) for achieving the dry press forming was applied to the surface of blanks. Then, the effect of the deep-drawability of A5052 aluminum alloy sheet with DLC-coating was investigated due to improve the formability in dry press forming. The deep-drawing experiments were carried out at the elevated temperature improve the formability of A5052 aluminum alloy sheet. The deep-drawability with DLC-coating was examined by deep-drawing test and friction test. As the result, dry press forming of the aluminum alloys without metalic adhesion was achieved by DLC-coating. In addition, it is confirmed that the formability of A5052 aluminum alloys sheet due to lower friction coefficient between blank and the die in the case of DLC-coating is improved in comparison with lubricating oil.

Original languageEnglish
Pages (from-to)79-83
Number of pages5
JournalWear
Volume286-287
DOIs
Publication statusPublished - 2012 May 15

    Fingerprint

Keywords

  • A5052 aluminum alloy sheet
  • DLC-coating
  • Deep-drawing
  • Sheet forming

ASJC Scopus subject areas

  • Condensed Matter Physics
  • Mechanics of Materials
  • Surfaces and Interfaces
  • Surfaces, Coatings and Films
  • Materials Chemistry

Cite this