Eccentric spiral antenna printed on a dielectric substrate

K. Hirose, H. Nakano

Research output: Contribution to journalConference articlepeer-review

9 Citations (Scopus)

Abstract

An eccentric spiral antenna printed on a dielectric substrate has been analyzed. A main beam is formed in a direction of 27° off-normal to the antenna plane with an axial ratio of 0.8 dB. The bandwidth where the gain reduction remains within 3 dB is found to be 29%, over which the axial ratio is less than 3 dB. The radiation efficiency is evaluated to be about 70% in the vicinity of the design center frequency.

Original languageEnglish
Pages (from-to)190-193
Number of pages4
JournalIEEE Antennas and Propagation Society, AP-S International Symposium (Digest)
Volume1
DOIs
Publication statusPublished - 1995 Jan 1
Externally publishedYes
EventProceedings of the 1995 IEEE Antennas and Propagation Society International Symposium. Part 4 (of 4) - Newport Beach, CA, USA
Duration: 1995 Jun 181995 Jun 23

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Fingerprint

Dive into the research topics of 'Eccentric spiral antenna printed on a dielectric substrate'. Together they form a unique fingerprint.

Cite this