EFFECT OF HEAT TREATMENTS ON THE MECHANICAL PROPERTIES OF A 6% Mn CRYOGENIC STEEL.

Masato Murakami, Masahide Harada, Koji Shibata, Toshio Fujita

Research output: Contribution to journalArticle

Abstract

The material was austenitized at 800 degree C for 1h and then either reheated 1h at 300-700 degree C (designated as QT), or intercritically heated at 650-725 degree C and reheated at 500-650 degree C (designated as QLT). The specimens were subjected to Charpy impact tests and tensile tests at minus 196 degree C. X-ray diffraction was used to determine the amount of retained austenite.

Original languageEnglish
JournalTransactions of the Iron and Steel Institute of Japan
Volume23
Issue number7
Publication statusPublished - 1983 Jul
Externally publishedYes

Fingerprint

Austenite
Heat treatment
X ray diffraction
Mechanical properties

ASJC Scopus subject areas

  • Engineering(all)

Cite this

EFFECT OF HEAT TREATMENTS ON THE MECHANICAL PROPERTIES OF A 6% Mn CRYOGENIC STEEL. / Murakami, Masato; Harada, Masahide; Shibata, Koji; Fujita, Toshio.

In: Transactions of the Iron and Steel Institute of Japan, Vol. 23, No. 7, 07.1983.

Research output: Contribution to journalArticle

@article{e6fffe01dde14f3b9cbf9ec0e5f5c4b3,
title = "EFFECT OF HEAT TREATMENTS ON THE MECHANICAL PROPERTIES OF A 6{\%} Mn CRYOGENIC STEEL.",
abstract = "The material was austenitized at 800 degree C for 1h and then either reheated 1h at 300-700 degree C (designated as QT), or intercritically heated at 650-725 degree C and reheated at 500-650 degree C (designated as QLT). The specimens were subjected to Charpy impact tests and tensile tests at minus 196 degree C. X-ray diffraction was used to determine the amount of retained austenite.",
author = "Masato Murakami and Masahide Harada and Koji Shibata and Toshio Fujita",
year = "1983",
month = "7",
language = "English",
volume = "23",
journal = "ISIJ International",
issn = "0915-1559",
publisher = "Iron and Steel Institute of Japan",
number = "7",

}

TY - JOUR

T1 - EFFECT OF HEAT TREATMENTS ON THE MECHANICAL PROPERTIES OF A 6% Mn CRYOGENIC STEEL.

AU - Murakami, Masato

AU - Harada, Masahide

AU - Shibata, Koji

AU - Fujita, Toshio

PY - 1983/7

Y1 - 1983/7

N2 - The material was austenitized at 800 degree C for 1h and then either reheated 1h at 300-700 degree C (designated as QT), or intercritically heated at 650-725 degree C and reheated at 500-650 degree C (designated as QLT). The specimens were subjected to Charpy impact tests and tensile tests at minus 196 degree C. X-ray diffraction was used to determine the amount of retained austenite.

AB - The material was austenitized at 800 degree C for 1h and then either reheated 1h at 300-700 degree C (designated as QT), or intercritically heated at 650-725 degree C and reheated at 500-650 degree C (designated as QLT). The specimens were subjected to Charpy impact tests and tensile tests at minus 196 degree C. X-ray diffraction was used to determine the amount of retained austenite.

UR - http://www.scopus.com/inward/record.url?scp=0020779809&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0020779809&partnerID=8YFLogxK

M3 - Article

VL - 23

JO - ISIJ International

JF - ISIJ International

SN - 0915-1559

IS - 7

ER -