Effect of pick feed on machining characteristic of up cutting in the high-efficient machining by small diameter radius end mill

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

In order to improve efficiency of high speed milling, effects of pick feeds of up cutting and down cutting on tool wear and processing characteristics were investigated after cutting pre-hardened steel NAK 55 by TiAlN-coated carbide radius end mill. Flank wear of the tools after up cutting was less than down cutting when the pick feed was smaller than 0.1 mm, which tendency changed when the pick feed was larger than 0.3 mm.

Original languageEnglish
Title of host publicationRecent Development in Machining, Materials and Mechanical Technologies III
EditorsHuy Bich Nguyen
PublisherTrans Tech Publications Ltd
Pages31-38
Number of pages8
ISBN (Print)9783035714821
DOIs
Publication statusPublished - 2019 Jan 1
EventInternational Conference on Machining, Materials and Mechanical Technologies, IC3MT 2018 - Ho Chi Minh City, Viet Nam
Duration: 2018 Sep 192018 Sep 22

Publication series

NameKey Engineering Materials
Volume825 KEM
ISSN (Print)1013-9826

Conference

ConferenceInternational Conference on Machining, Materials and Mechanical Technologies, IC3MT 2018
CountryViet Nam
CityHo Chi Minh City
Period18/9/1918/9/22

    Fingerprint

Keywords

  • Environment issues
  • High Speed Milling
  • Radius End mill
  • Surface Roughness
  • Tool Wear

ASJC Scopus subject areas

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Nakai, H., Sawa, T., & Anzai, M. (2019). Effect of pick feed on machining characteristic of up cutting in the high-efficient machining by small diameter radius end mill. In H. B. Nguyen (Ed.), Recent Development in Machining, Materials and Mechanical Technologies III (pp. 31-38). (Key Engineering Materials; Vol. 825 KEM). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/KEM.825.31