Effect of small steel-piece size on charpy absorbed energy

D. Kitazume, K. Ono, Kengo Anami, T. Iida

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

It is necessary to gain the information on the mechanical, chemical, and fracture properties of their materials in order to find out cause of damage and examine retrofitting methods for repairing damaged steel bridges. One of the properties used to investigate retrofitting methods is fracture toughness. Charpy impact tests are conducted in order to examine fracture toughness. The size of test specimens of Charpy impact tests is specified in Japanese Industrial Standards. Test specimens must be shaped according to the specific size, but it is desirable to take smaller material from sound material. Therefore, this study aims to make test specimens with small steel pieces in order to estimate fracture toughness. The size of small steel pieces was set as they can be taken from stop holes or bolt holes. Test specimens were made with these small steel pieces by electron beam weld. Then the effect of steel piece size on Charpy absorbed energy was examined.

Original languageEnglish
Title of host publicationMaintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges - Proceedings of the 9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018
EditorsDan M. Frangopol, Riadh Al-Mahaidi, Colin Caprani, Nigel Powers
PublisherCRC Press/Balkema
Pages2889-2893
Number of pages5
ISBN (Print)9781138730458
Publication statusPublished - 2018 Jan 1
Event9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018 - Melbourne, Australia
Duration: 2018 Jul 92018 Jul 13

Publication series

NameMaintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges - Proceedings of the 9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018

Conference

Conference9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018
CountryAustralia
CityMelbourne
Period18/7/918/7/13

Fingerprint

Fracture toughness
Steel
Retrofitting
Steel bridges
Bolts
Electron beams
Welds
Acoustic waves

ASJC Scopus subject areas

  • Civil and Structural Engineering
  • Safety, Risk, Reliability and Quality

Cite this

Kitazume, D., Ono, K., Anami, K., & Iida, T. (2018). Effect of small steel-piece size on charpy absorbed energy. In D. M. Frangopol, R. Al-Mahaidi, C. Caprani, & N. Powers (Eds.), Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges - Proceedings of the 9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018 (pp. 2889-2893). (Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges - Proceedings of the 9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018). CRC Press/Balkema.

Effect of small steel-piece size on charpy absorbed energy. / Kitazume, D.; Ono, K.; Anami, Kengo; Iida, T.

Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges - Proceedings of the 9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018. ed. / Dan M. Frangopol; Riadh Al-Mahaidi; Colin Caprani; Nigel Powers. CRC Press/Balkema, 2018. p. 2889-2893 (Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges - Proceedings of the 9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Kitazume, D, Ono, K, Anami, K & Iida, T 2018, Effect of small steel-piece size on charpy absorbed energy. in DM Frangopol, R Al-Mahaidi, C Caprani & N Powers (eds), Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges - Proceedings of the 9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018. Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges - Proceedings of the 9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018, CRC Press/Balkema, pp. 2889-2893, 9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018, Melbourne, Australia, 18/7/9.
Kitazume D, Ono K, Anami K, Iida T. Effect of small steel-piece size on charpy absorbed energy. In Frangopol DM, Al-Mahaidi R, Caprani C, Powers N, editors, Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges - Proceedings of the 9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018. CRC Press/Balkema. 2018. p. 2889-2893. (Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges - Proceedings of the 9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018).
Kitazume, D. ; Ono, K. ; Anami, Kengo ; Iida, T. / Effect of small steel-piece size on charpy absorbed energy. Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges - Proceedings of the 9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018. editor / Dan M. Frangopol ; Riadh Al-Mahaidi ; Colin Caprani ; Nigel Powers. CRC Press/Balkema, 2018. pp. 2889-2893 (Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges - Proceedings of the 9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018).
@inproceedings{2c5fa38932c345279b884643f1c9c6a1,
title = "Effect of small steel-piece size on charpy absorbed energy",
abstract = "It is necessary to gain the information on the mechanical, chemical, and fracture properties of their materials in order to find out cause of damage and examine retrofitting methods for repairing damaged steel bridges. One of the properties used to investigate retrofitting methods is fracture toughness. Charpy impact tests are conducted in order to examine fracture toughness. The size of test specimens of Charpy impact tests is specified in Japanese Industrial Standards. Test specimens must be shaped according to the specific size, but it is desirable to take smaller material from sound material. Therefore, this study aims to make test specimens with small steel pieces in order to estimate fracture toughness. The size of small steel pieces was set as they can be taken from stop holes or bolt holes. Test specimens were made with these small steel pieces by electron beam weld. Then the effect of steel piece size on Charpy absorbed energy was examined.",
author = "D. Kitazume and K. Ono and Kengo Anami and T. Iida",
year = "2018",
month = "1",
day = "1",
language = "English",
isbn = "9781138730458",
series = "Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges - Proceedings of the 9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018",
publisher = "CRC Press/Balkema",
pages = "2889--2893",
editor = "Frangopol, {Dan M.} and Riadh Al-Mahaidi and Colin Caprani and Nigel Powers",
booktitle = "Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges - Proceedings of the 9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018",

}

TY - GEN

T1 - Effect of small steel-piece size on charpy absorbed energy

AU - Kitazume, D.

AU - Ono, K.

AU - Anami, Kengo

AU - Iida, T.

PY - 2018/1/1

Y1 - 2018/1/1

N2 - It is necessary to gain the information on the mechanical, chemical, and fracture properties of their materials in order to find out cause of damage and examine retrofitting methods for repairing damaged steel bridges. One of the properties used to investigate retrofitting methods is fracture toughness. Charpy impact tests are conducted in order to examine fracture toughness. The size of test specimens of Charpy impact tests is specified in Japanese Industrial Standards. Test specimens must be shaped according to the specific size, but it is desirable to take smaller material from sound material. Therefore, this study aims to make test specimens with small steel pieces in order to estimate fracture toughness. The size of small steel pieces was set as they can be taken from stop holes or bolt holes. Test specimens were made with these small steel pieces by electron beam weld. Then the effect of steel piece size on Charpy absorbed energy was examined.

AB - It is necessary to gain the information on the mechanical, chemical, and fracture properties of their materials in order to find out cause of damage and examine retrofitting methods for repairing damaged steel bridges. One of the properties used to investigate retrofitting methods is fracture toughness. Charpy impact tests are conducted in order to examine fracture toughness. The size of test specimens of Charpy impact tests is specified in Japanese Industrial Standards. Test specimens must be shaped according to the specific size, but it is desirable to take smaller material from sound material. Therefore, this study aims to make test specimens with small steel pieces in order to estimate fracture toughness. The size of small steel pieces was set as they can be taken from stop holes or bolt holes. Test specimens were made with these small steel pieces by electron beam weld. Then the effect of steel piece size on Charpy absorbed energy was examined.

UR - http://www.scopus.com/inward/record.url?scp=85067064978&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85067064978&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:85067064978

SN - 9781138730458

T3 - Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges - Proceedings of the 9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018

SP - 2889

EP - 2893

BT - Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges - Proceedings of the 9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018

A2 - Frangopol, Dan M.

A2 - Al-Mahaidi, Riadh

A2 - Caprani, Colin

A2 - Powers, Nigel

PB - CRC Press/Balkema

ER -