Energy efficiency of water hydraulic FST, PMT, and servo motor system

Pha N. Pham, Kazuhisa Ito, Shigeru Ikeo

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

Low energy efficiency and high installed cost are the two main problems that prevent water hydraulics to be popular in application. This research introduces two novel systems: water hydraulic fluid switching transmission (FST) and pump motor transmission (PMT) that only use cheap ON/OFF valves for lessening the initial cost and reducing the energy consumption; beside, this paper also introduces a conventional servo motor system (SMS) for comparison. Moreover, both FST and PMT systems can recover the kinetic energy of a flywheel in a deceleration process and store it into an accumulator for using in the next working cycle. The experimental results show that the FST system only need from 33.2 to 47.3% of total energy consumption of the SMS to complete a full cycle and even much reducing in PMT system with the reduction from 76.0 to 86.0%. A method to estimate the saved energy stored in the accumulator will be introduced in this study as well and found out that from 8.2 to 11.6% and from 8.7 to 13.7% of the total energy consumption of the FST and PMT systems were recovered. The SMS shows advantage in transient response with the shortest rise time and smallest overshoot while the steady state error is only slightly smaller than the PMT system. The steady state error of FST system is quite large, but it keeps almost same value for all reference velocity; thus, such system is appropriate for applying in high velocity systems. With acceptable velocity response and extremely improving in energy efficiency, the PMT system is promising to replace conventional water hydraulic system in many applications.

Original languageEnglish
Title of host publicationASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC 2014
PublisherWeb Portal ASME (American Society of Mechanical Engineers)
ISBN (Print)9780791845974
DOIs
Publication statusPublished - 2014
EventASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC 2014 - Bath
Duration: 2014 Sep 102014 Sep 12

Other

OtherASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC 2014
CityBath
Period14/9/1014/9/12

Fingerprint

Hydraulic fluids
Energy efficiency
Pumps
Water
Fluids
Energy utilization
Hydraulics
Flywheels
Deceleration
Transient analysis
Kinetic energy
Costs

ASJC Scopus subject areas

  • Fluid Flow and Transfer Processes

Cite this

Pham, P. N., Ito, K., & Ikeo, S. (2014). Energy efficiency of water hydraulic FST, PMT, and servo motor system. In ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC 2014 Web Portal ASME (American Society of Mechanical Engineers). https://doi.org/10.1115/FPMC2014-7822

Energy efficiency of water hydraulic FST, PMT, and servo motor system. / Pham, Pha N.; Ito, Kazuhisa; Ikeo, Shigeru.

ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC 2014. Web Portal ASME (American Society of Mechanical Engineers), 2014.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pham, PN, Ito, K & Ikeo, S 2014, Energy efficiency of water hydraulic FST, PMT, and servo motor system. in ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC 2014. Web Portal ASME (American Society of Mechanical Engineers), ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC 2014, Bath, 14/9/10. https://doi.org/10.1115/FPMC2014-7822
Pham PN, Ito K, Ikeo S. Energy efficiency of water hydraulic FST, PMT, and servo motor system. In ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC 2014. Web Portal ASME (American Society of Mechanical Engineers). 2014 https://doi.org/10.1115/FPMC2014-7822
Pham, Pha N. ; Ito, Kazuhisa ; Ikeo, Shigeru. / Energy efficiency of water hydraulic FST, PMT, and servo motor system. ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC 2014. Web Portal ASME (American Society of Mechanical Engineers), 2014.
@inproceedings{fae36b3356524843ae2566d7308da160,
title = "Energy efficiency of water hydraulic FST, PMT, and servo motor system",
abstract = "Low energy efficiency and high installed cost are the two main problems that prevent water hydraulics to be popular in application. This research introduces two novel systems: water hydraulic fluid switching transmission (FST) and pump motor transmission (PMT) that only use cheap ON/OFF valves for lessening the initial cost and reducing the energy consumption; beside, this paper also introduces a conventional servo motor system (SMS) for comparison. Moreover, both FST and PMT systems can recover the kinetic energy of a flywheel in a deceleration process and store it into an accumulator for using in the next working cycle. The experimental results show that the FST system only need from 33.2 to 47.3{\%} of total energy consumption of the SMS to complete a full cycle and even much reducing in PMT system with the reduction from 76.0 to 86.0{\%}. A method to estimate the saved energy stored in the accumulator will be introduced in this study as well and found out that from 8.2 to 11.6{\%} and from 8.7 to 13.7{\%} of the total energy consumption of the FST and PMT systems were recovered. The SMS shows advantage in transient response with the shortest rise time and smallest overshoot while the steady state error is only slightly smaller than the PMT system. The steady state error of FST system is quite large, but it keeps almost same value for all reference velocity; thus, such system is appropriate for applying in high velocity systems. With acceptable velocity response and extremely improving in energy efficiency, the PMT system is promising to replace conventional water hydraulic system in many applications.",
author = "Pham, {Pha N.} and Kazuhisa Ito and Shigeru Ikeo",
year = "2014",
doi = "10.1115/FPMC2014-7822",
language = "English",
isbn = "9780791845974",
booktitle = "ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC 2014",
publisher = "Web Portal ASME (American Society of Mechanical Engineers)",

}

TY - GEN

T1 - Energy efficiency of water hydraulic FST, PMT, and servo motor system

AU - Pham, Pha N.

AU - Ito, Kazuhisa

AU - Ikeo, Shigeru

PY - 2014

Y1 - 2014

N2 - Low energy efficiency and high installed cost are the two main problems that prevent water hydraulics to be popular in application. This research introduces two novel systems: water hydraulic fluid switching transmission (FST) and pump motor transmission (PMT) that only use cheap ON/OFF valves for lessening the initial cost and reducing the energy consumption; beside, this paper also introduces a conventional servo motor system (SMS) for comparison. Moreover, both FST and PMT systems can recover the kinetic energy of a flywheel in a deceleration process and store it into an accumulator for using in the next working cycle. The experimental results show that the FST system only need from 33.2 to 47.3% of total energy consumption of the SMS to complete a full cycle and even much reducing in PMT system with the reduction from 76.0 to 86.0%. A method to estimate the saved energy stored in the accumulator will be introduced in this study as well and found out that from 8.2 to 11.6% and from 8.7 to 13.7% of the total energy consumption of the FST and PMT systems were recovered. The SMS shows advantage in transient response with the shortest rise time and smallest overshoot while the steady state error is only slightly smaller than the PMT system. The steady state error of FST system is quite large, but it keeps almost same value for all reference velocity; thus, such system is appropriate for applying in high velocity systems. With acceptable velocity response and extremely improving in energy efficiency, the PMT system is promising to replace conventional water hydraulic system in many applications.

AB - Low energy efficiency and high installed cost are the two main problems that prevent water hydraulics to be popular in application. This research introduces two novel systems: water hydraulic fluid switching transmission (FST) and pump motor transmission (PMT) that only use cheap ON/OFF valves for lessening the initial cost and reducing the energy consumption; beside, this paper also introduces a conventional servo motor system (SMS) for comparison. Moreover, both FST and PMT systems can recover the kinetic energy of a flywheel in a deceleration process and store it into an accumulator for using in the next working cycle. The experimental results show that the FST system only need from 33.2 to 47.3% of total energy consumption of the SMS to complete a full cycle and even much reducing in PMT system with the reduction from 76.0 to 86.0%. A method to estimate the saved energy stored in the accumulator will be introduced in this study as well and found out that from 8.2 to 11.6% and from 8.7 to 13.7% of the total energy consumption of the FST and PMT systems were recovered. The SMS shows advantage in transient response with the shortest rise time and smallest overshoot while the steady state error is only slightly smaller than the PMT system. The steady state error of FST system is quite large, but it keeps almost same value for all reference velocity; thus, such system is appropriate for applying in high velocity systems. With acceptable velocity response and extremely improving in energy efficiency, the PMT system is promising to replace conventional water hydraulic system in many applications.

UR - http://www.scopus.com/inward/record.url?scp=84914689167&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84914689167&partnerID=8YFLogxK

U2 - 10.1115/FPMC2014-7822

DO - 10.1115/FPMC2014-7822

M3 - Conference contribution

AN - SCOPUS:84914689167

SN - 9780791845974

BT - ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC 2014

PB - Web Portal ASME (American Society of Mechanical Engineers)

ER -