Evaluation of grinding performance by mechanical properties of super abrasive wheel -evaluation of grade by grinding force

Takekazu Sawa, Nishikawa Naohiro, Ikuse Yasushi

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

There is the grade as one of the selection criteria of a grinding wheel like WA whetstone or GC whetstone. The grade of grinding wheel is defined as an index which shows the strength of connection of a grain and a grain, and is usually estimated by bending strength. There are many papers about the relationship between the grade of a grinding wheel and the grinding performance. Relationship between the grade of a grinding wheel and the grinding performance is almost clear. Also, the relationship between mechanical properties of a grinding wheel and the grade is also clear. On the other hand, since the grain layer of a super abrasive grinding wheel is thin, it is difficult to apply the conventional evaluation test of the grade. The evaluation method of the grade which can be adapted the super abrasive grinding wheel is not established. In addition, since the grade of a super abrasive grinding wheel is a manufacture manufacturer's original standard, there is a minute difference by manufacturer. The super abrasive grinding wheel as well as the grinding wheel is conjectured that the grade influences the grinding performance. Namely, it is important to relate the grade and the mechanical properties of a grain layer. However, researches which relate the grade, the grinding performance and the mechanical properties of a super abrasive grinding wheel are not done so far. Therefore, this study examined the relationship between the mechanical properties of a grain layer of a super abrasive grinding wheel and the grade, the grinding performance. The final objective of this study is to evaluate the grinding performance from mechanical properties of a grain layer of a super abrasive grinding wheel. The purpose of this report is to clarify relationship between the grade and the grinding force in a resinoid bond diamond wheel. The specific experiment procedure is as follows. When carrying out surface grinding of the diamond sticks using a grinding wheel, the relationship of the grade and the grinding force was clarified. Based on the knowledge acquired in this experiment, relationship between the grade of a super abrasive grinding wheel and the grinding force was considered. As the results, it confirmed that the grade of a resinoid bond diamond wheel could be evaluated by the grinding force.

Original languageEnglish
Title of host publicationKey Engineering Materials
PublisherTrans Tech Publications Ltd
Pages266-270
Number of pages5
Volume656-657
ISBN (Print)9783038354956
DOIs
Publication statusPublished - 2015
EventInternational Conference on Machining, Materials and Mechanical Technologies, IC3MT 2014 - Taipei City, Taiwan, Province of China
Duration: 2014 Aug 312014 Sep 5

Publication series

NameKey Engineering Materials
Volume656-657
ISSN (Print)10139826

Other

OtherInternational Conference on Machining, Materials and Mechanical Technologies, IC3MT 2014
CountryTaiwan, Province of China
CityTaipei City
Period14/8/3114/9/5

Fingerprint

Grinding wheels
Mechanical properties
Diamond
Diamonds
Wheels

Keywords

  • Diamond wheel
  • Filler
  • Grade
  • Grinding force
  • Grinding wheel
  • Metal bond
  • Resinoid bond
  • Stick
  • Super abrasive grinding wheel

ASJC Scopus subject areas

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Sawa, T., Naohiro, N., & Yasushi, I. (2015). Evaluation of grinding performance by mechanical properties of super abrasive wheel -evaluation of grade by grinding force. In Key Engineering Materials (Vol. 656-657, pp. 266-270). (Key Engineering Materials; Vol. 656-657). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/KEM.656-657.266

Evaluation of grinding performance by mechanical properties of super abrasive wheel -evaluation of grade by grinding force. / Sawa, Takekazu; Naohiro, Nishikawa; Yasushi, Ikuse.

Key Engineering Materials. Vol. 656-657 Trans Tech Publications Ltd, 2015. p. 266-270 (Key Engineering Materials; Vol. 656-657).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sawa, T, Naohiro, N & Yasushi, I 2015, Evaluation of grinding performance by mechanical properties of super abrasive wheel -evaluation of grade by grinding force. in Key Engineering Materials. vol. 656-657, Key Engineering Materials, vol. 656-657, Trans Tech Publications Ltd, pp. 266-270, International Conference on Machining, Materials and Mechanical Technologies, IC3MT 2014, Taipei City, Taiwan, Province of China, 14/8/31. https://doi.org/10.4028/www.scientific.net/KEM.656-657.266
Sawa T, Naohiro N, Yasushi I. Evaluation of grinding performance by mechanical properties of super abrasive wheel -evaluation of grade by grinding force. In Key Engineering Materials. Vol. 656-657. Trans Tech Publications Ltd. 2015. p. 266-270. (Key Engineering Materials). https://doi.org/10.4028/www.scientific.net/KEM.656-657.266
Sawa, Takekazu ; Naohiro, Nishikawa ; Yasushi, Ikuse. / Evaluation of grinding performance by mechanical properties of super abrasive wheel -evaluation of grade by grinding force. Key Engineering Materials. Vol. 656-657 Trans Tech Publications Ltd, 2015. pp. 266-270 (Key Engineering Materials).
@inproceedings{f088812fbb9449c6992234d78c012cef,
title = "Evaluation of grinding performance by mechanical properties of super abrasive wheel -evaluation of grade by grinding force",
abstract = "There is the grade as one of the selection criteria of a grinding wheel like WA whetstone or GC whetstone. The grade of grinding wheel is defined as an index which shows the strength of connection of a grain and a grain, and is usually estimated by bending strength. There are many papers about the relationship between the grade of a grinding wheel and the grinding performance. Relationship between the grade of a grinding wheel and the grinding performance is almost clear. Also, the relationship between mechanical properties of a grinding wheel and the grade is also clear. On the other hand, since the grain layer of a super abrasive grinding wheel is thin, it is difficult to apply the conventional evaluation test of the grade. The evaluation method of the grade which can be adapted the super abrasive grinding wheel is not established. In addition, since the grade of a super abrasive grinding wheel is a manufacture manufacturer's original standard, there is a minute difference by manufacturer. The super abrasive grinding wheel as well as the grinding wheel is conjectured that the grade influences the grinding performance. Namely, it is important to relate the grade and the mechanical properties of a grain layer. However, researches which relate the grade, the grinding performance and the mechanical properties of a super abrasive grinding wheel are not done so far. Therefore, this study examined the relationship between the mechanical properties of a grain layer of a super abrasive grinding wheel and the grade, the grinding performance. The final objective of this study is to evaluate the grinding performance from mechanical properties of a grain layer of a super abrasive grinding wheel. The purpose of this report is to clarify relationship between the grade and the grinding force in a resinoid bond diamond wheel. The specific experiment procedure is as follows. When carrying out surface grinding of the diamond sticks using a grinding wheel, the relationship of the grade and the grinding force was clarified. Based on the knowledge acquired in this experiment, relationship between the grade of a super abrasive grinding wheel and the grinding force was considered. As the results, it confirmed that the grade of a resinoid bond diamond wheel could be evaluated by the grinding force.",
keywords = "Diamond wheel, Filler, Grade, Grinding force, Grinding wheel, Metal bond, Resinoid bond, Stick, Super abrasive grinding wheel",
author = "Takekazu Sawa and Nishikawa Naohiro and Ikuse Yasushi",
year = "2015",
doi = "10.4028/www.scientific.net/KEM.656-657.266",
language = "English",
isbn = "9783038354956",
volume = "656-657",
series = "Key Engineering Materials",
publisher = "Trans Tech Publications Ltd",
pages = "266--270",
booktitle = "Key Engineering Materials",

}

TY - GEN

T1 - Evaluation of grinding performance by mechanical properties of super abrasive wheel -evaluation of grade by grinding force

AU - Sawa, Takekazu

AU - Naohiro, Nishikawa

AU - Yasushi, Ikuse

PY - 2015

Y1 - 2015

N2 - There is the grade as one of the selection criteria of a grinding wheel like WA whetstone or GC whetstone. The grade of grinding wheel is defined as an index which shows the strength of connection of a grain and a grain, and is usually estimated by bending strength. There are many papers about the relationship between the grade of a grinding wheel and the grinding performance. Relationship between the grade of a grinding wheel and the grinding performance is almost clear. Also, the relationship between mechanical properties of a grinding wheel and the grade is also clear. On the other hand, since the grain layer of a super abrasive grinding wheel is thin, it is difficult to apply the conventional evaluation test of the grade. The evaluation method of the grade which can be adapted the super abrasive grinding wheel is not established. In addition, since the grade of a super abrasive grinding wheel is a manufacture manufacturer's original standard, there is a minute difference by manufacturer. The super abrasive grinding wheel as well as the grinding wheel is conjectured that the grade influences the grinding performance. Namely, it is important to relate the grade and the mechanical properties of a grain layer. However, researches which relate the grade, the grinding performance and the mechanical properties of a super abrasive grinding wheel are not done so far. Therefore, this study examined the relationship between the mechanical properties of a grain layer of a super abrasive grinding wheel and the grade, the grinding performance. The final objective of this study is to evaluate the grinding performance from mechanical properties of a grain layer of a super abrasive grinding wheel. The purpose of this report is to clarify relationship between the grade and the grinding force in a resinoid bond diamond wheel. The specific experiment procedure is as follows. When carrying out surface grinding of the diamond sticks using a grinding wheel, the relationship of the grade and the grinding force was clarified. Based on the knowledge acquired in this experiment, relationship between the grade of a super abrasive grinding wheel and the grinding force was considered. As the results, it confirmed that the grade of a resinoid bond diamond wheel could be evaluated by the grinding force.

AB - There is the grade as one of the selection criteria of a grinding wheel like WA whetstone or GC whetstone. The grade of grinding wheel is defined as an index which shows the strength of connection of a grain and a grain, and is usually estimated by bending strength. There are many papers about the relationship between the grade of a grinding wheel and the grinding performance. Relationship between the grade of a grinding wheel and the grinding performance is almost clear. Also, the relationship between mechanical properties of a grinding wheel and the grade is also clear. On the other hand, since the grain layer of a super abrasive grinding wheel is thin, it is difficult to apply the conventional evaluation test of the grade. The evaluation method of the grade which can be adapted the super abrasive grinding wheel is not established. In addition, since the grade of a super abrasive grinding wheel is a manufacture manufacturer's original standard, there is a minute difference by manufacturer. The super abrasive grinding wheel as well as the grinding wheel is conjectured that the grade influences the grinding performance. Namely, it is important to relate the grade and the mechanical properties of a grain layer. However, researches which relate the grade, the grinding performance and the mechanical properties of a super abrasive grinding wheel are not done so far. Therefore, this study examined the relationship between the mechanical properties of a grain layer of a super abrasive grinding wheel and the grade, the grinding performance. The final objective of this study is to evaluate the grinding performance from mechanical properties of a grain layer of a super abrasive grinding wheel. The purpose of this report is to clarify relationship between the grade and the grinding force in a resinoid bond diamond wheel. The specific experiment procedure is as follows. When carrying out surface grinding of the diamond sticks using a grinding wheel, the relationship of the grade and the grinding force was clarified. Based on the knowledge acquired in this experiment, relationship between the grade of a super abrasive grinding wheel and the grinding force was considered. As the results, it confirmed that the grade of a resinoid bond diamond wheel could be evaluated by the grinding force.

KW - Diamond wheel

KW - Filler

KW - Grade

KW - Grinding force

KW - Grinding wheel

KW - Metal bond

KW - Resinoid bond

KW - Stick

KW - Super abrasive grinding wheel

UR - http://www.scopus.com/inward/record.url?scp=84952308692&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84952308692&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/KEM.656-657.266

DO - 10.4028/www.scientific.net/KEM.656-657.266

M3 - Conference contribution

AN - SCOPUS:84952308692

SN - 9783038354956

VL - 656-657

T3 - Key Engineering Materials

SP - 266

EP - 270

BT - Key Engineering Materials

PB - Trans Tech Publications Ltd

ER -