Evaluation of preventing rear-end collision system

Toshiya Hirose, Takafumi Kawakami, Nobuyo Kasuga, Toichi Sawada

Research output: Contribution to journalArticle

Abstract

This study was intended to construct and then evaluate rear-end collision preventing systems that support braking operation process of the following vehicle's driver in an attempt to prevent rear-end vehicle collision. The system provides the following vehicle's driver with visual information consisting of three components, an area of red brake lamp in proportion to the degree of the deceleration of own vehicle, an area of red brake lamp in proportion to the degree of the deceleration rate required for the following vehicle, and warning signal by blinking lamp. Using the driving simulator in this experiment, braking operations of the following vehicle's driver taken in response to the braking maneuver of the leading vehicle with the rear-end collision system on board were measured. As a result, in the experiment of the system to provide signals calling for the necessary deceleration efforts, the headway distance between the two vehicles was set at 20 m with 7 m/s2 of deceleration velocity, it was found that the braking operation started faster by 0.1 s∼0.2 s and the relative velocity was reduced by about 30%, thus leading to improvement of about 60% in operation of preventing the rear-end collision compared with the vehicle with no such system on board. It is considered that the improved effect resulted from the fact that recognition and judgment of the drivers in the braking operation were supported by the system.

Original languageEnglish
Pages (from-to)244-250
Number of pages7
JournalNihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C
Volume73
Issue number1
Publication statusPublished - 2007 Jan
Externally publishedYes

Fingerprint

Braking
Deceleration
Electric lamps
Brakes
Simulators
Experiments

Keywords

  • Automobile
  • Driving simulator
  • Human engineering
  • Human interface
  • Rear-end collision
  • Support system

ASJC Scopus subject areas

  • Mechanical Engineering

Cite this

Evaluation of preventing rear-end collision system. / Hirose, Toshiya; Kawakami, Takafumi; Kasuga, Nobuyo; Sawada, Toichi.

In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, Vol. 73, No. 1, 01.2007, p. 244-250.

Research output: Contribution to journalArticle

@article{770277d1ab034c44bc92ec3242838cfb,
title = "Evaluation of preventing rear-end collision system",
abstract = "This study was intended to construct and then evaluate rear-end collision preventing systems that support braking operation process of the following vehicle's driver in an attempt to prevent rear-end vehicle collision. The system provides the following vehicle's driver with visual information consisting of three components, an area of red brake lamp in proportion to the degree of the deceleration of own vehicle, an area of red brake lamp in proportion to the degree of the deceleration rate required for the following vehicle, and warning signal by blinking lamp. Using the driving simulator in this experiment, braking operations of the following vehicle's driver taken in response to the braking maneuver of the leading vehicle with the rear-end collision system on board were measured. As a result, in the experiment of the system to provide signals calling for the necessary deceleration efforts, the headway distance between the two vehicles was set at 20 m with 7 m/s2 of deceleration velocity, it was found that the braking operation started faster by 0.1 s∼0.2 s and the relative velocity was reduced by about 30{\%}, thus leading to improvement of about 60{\%} in operation of preventing the rear-end collision compared with the vehicle with no such system on board. It is considered that the improved effect resulted from the fact that recognition and judgment of the drivers in the braking operation were supported by the system.",
keywords = "Automobile, Driving simulator, Human engineering, Human interface, Rear-end collision, Support system",
author = "Toshiya Hirose and Takafumi Kawakami and Nobuyo Kasuga and Toichi Sawada",
year = "2007",
month = "1",
language = "English",
volume = "73",
pages = "244--250",
journal = "Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C",
issn = "0387-5024",
publisher = "Japan Society of Mechanical Engineers",
number = "1",

}

TY - JOUR

T1 - Evaluation of preventing rear-end collision system

AU - Hirose, Toshiya

AU - Kawakami, Takafumi

AU - Kasuga, Nobuyo

AU - Sawada, Toichi

PY - 2007/1

Y1 - 2007/1

N2 - This study was intended to construct and then evaluate rear-end collision preventing systems that support braking operation process of the following vehicle's driver in an attempt to prevent rear-end vehicle collision. The system provides the following vehicle's driver with visual information consisting of three components, an area of red brake lamp in proportion to the degree of the deceleration of own vehicle, an area of red brake lamp in proportion to the degree of the deceleration rate required for the following vehicle, and warning signal by blinking lamp. Using the driving simulator in this experiment, braking operations of the following vehicle's driver taken in response to the braking maneuver of the leading vehicle with the rear-end collision system on board were measured. As a result, in the experiment of the system to provide signals calling for the necessary deceleration efforts, the headway distance between the two vehicles was set at 20 m with 7 m/s2 of deceleration velocity, it was found that the braking operation started faster by 0.1 s∼0.2 s and the relative velocity was reduced by about 30%, thus leading to improvement of about 60% in operation of preventing the rear-end collision compared with the vehicle with no such system on board. It is considered that the improved effect resulted from the fact that recognition and judgment of the drivers in the braking operation were supported by the system.

AB - This study was intended to construct and then evaluate rear-end collision preventing systems that support braking operation process of the following vehicle's driver in an attempt to prevent rear-end vehicle collision. The system provides the following vehicle's driver with visual information consisting of three components, an area of red brake lamp in proportion to the degree of the deceleration of own vehicle, an area of red brake lamp in proportion to the degree of the deceleration rate required for the following vehicle, and warning signal by blinking lamp. Using the driving simulator in this experiment, braking operations of the following vehicle's driver taken in response to the braking maneuver of the leading vehicle with the rear-end collision system on board were measured. As a result, in the experiment of the system to provide signals calling for the necessary deceleration efforts, the headway distance between the two vehicles was set at 20 m with 7 m/s2 of deceleration velocity, it was found that the braking operation started faster by 0.1 s∼0.2 s and the relative velocity was reduced by about 30%, thus leading to improvement of about 60% in operation of preventing the rear-end collision compared with the vehicle with no such system on board. It is considered that the improved effect resulted from the fact that recognition and judgment of the drivers in the braking operation were supported by the system.

KW - Automobile

KW - Driving simulator

KW - Human engineering

KW - Human interface

KW - Rear-end collision

KW - Support system

UR - http://www.scopus.com/inward/record.url?scp=34248390522&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=34248390522&partnerID=8YFLogxK

M3 - Article

VL - 73

SP - 244

EP - 250

JO - Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C

JF - Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C

SN - 0387-5024

IS - 1

ER -