Evaluations of mechanical properties of DLC film by indentation method and the effect of substrate

Tomoyuki Nakayama, Kenichi Sakaue, Takeshi Ogawa, Yoshifumi Kobayashi, Takema Teratani

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

This paper discussed the fracture mechanism of diamond like carbon (DLC) film subjected to contact loading. The DLC films with the thickness of about 12μm were deposited onto SUS304, SUS410 and WC-Co substrates by radio frequency (RF) plasma-based ion implantation method. Dual indenter method was applied to determine the stress-strain response of the films. Rockwell indentation tests with simultaneous monitoring of acoustic emission (AE) and corrosion potential fluctuation (CPF) techniques were also applied to the films to evaluate the static tensile strength. FEM analyses demonstrated the stress distribution under indentation testing and correlated the film fracture behavior with static strength of the films, which was assumed to be independent of the substrate materials based on the results of Raman spectra and indentation tests. Cyclic indentation tests were performed on the DLC film deposited onto WC-Co in order to evaluate the fatigue strength of the film. The cyclic fatigue was found to degrade the film strength compared to the static property.

Original languageEnglish
Pages (from-to)833-840
Number of pages8
JournalZairyo/Journal of the Society of Materials Science, Japan
Volume58
Issue number10
DOIs
Publication statusPublished - 2009 Oct
Externally publishedYes

Fingerprint

Diamond like carbon films
indentation
Indentation
diamonds
mechanical properties
Mechanical properties
evaluation
carbon
Substrates
Acoustic emissions
Ion implantation
Raman scattering
Stress concentration
Tensile strength
acoustic emission
Fatigue of materials
Corrosion
Plasmas
Finite element method
tensile strength

Keywords

  • Acoustic emission
  • Contact fracture
  • Corrosion potential fluctuation
  • Cyclic fatigue
  • Diamond like carbon film
  • Indentation

ASJC Scopus subject areas

  • Materials Science(all)
  • Mechanical Engineering
  • Mechanics of Materials
  • Condensed Matter Physics

Cite this

Evaluations of mechanical properties of DLC film by indentation method and the effect of substrate. / Nakayama, Tomoyuki; Sakaue, Kenichi; Ogawa, Takeshi; Kobayashi, Yoshifumi; Teratani, Takema.

In: Zairyo/Journal of the Society of Materials Science, Japan, Vol. 58, No. 10, 10.2009, p. 833-840.

Research output: Contribution to journalArticle

Nakayama, Tomoyuki ; Sakaue, Kenichi ; Ogawa, Takeshi ; Kobayashi, Yoshifumi ; Teratani, Takema. / Evaluations of mechanical properties of DLC film by indentation method and the effect of substrate. In: Zairyo/Journal of the Society of Materials Science, Japan. 2009 ; Vol. 58, No. 10. pp. 833-840.
@article{d96a40641d9e4566999defcfe6484ea7,
title = "Evaluations of mechanical properties of DLC film by indentation method and the effect of substrate",
abstract = "This paper discussed the fracture mechanism of diamond like carbon (DLC) film subjected to contact loading. The DLC films with the thickness of about 12μm were deposited onto SUS304, SUS410 and WC-Co substrates by radio frequency (RF) plasma-based ion implantation method. Dual indenter method was applied to determine the stress-strain response of the films. Rockwell indentation tests with simultaneous monitoring of acoustic emission (AE) and corrosion potential fluctuation (CPF) techniques were also applied to the films to evaluate the static tensile strength. FEM analyses demonstrated the stress distribution under indentation testing and correlated the film fracture behavior with static strength of the films, which was assumed to be independent of the substrate materials based on the results of Raman spectra and indentation tests. Cyclic indentation tests were performed on the DLC film deposited onto WC-Co in order to evaluate the fatigue strength of the film. The cyclic fatigue was found to degrade the film strength compared to the static property.",
keywords = "Acoustic emission, Contact fracture, Corrosion potential fluctuation, Cyclic fatigue, Diamond like carbon film, Indentation",
author = "Tomoyuki Nakayama and Kenichi Sakaue and Takeshi Ogawa and Yoshifumi Kobayashi and Takema Teratani",
year = "2009",
month = "10",
doi = "10.2472/jsms.58.833",
language = "English",
volume = "58",
pages = "833--840",
journal = "Zairyo/Journal of the Society of Materials Science, Japan",
issn = "0514-5163",
publisher = "Society of Materials Science Japan",
number = "10",

}

TY - JOUR

T1 - Evaluations of mechanical properties of DLC film by indentation method and the effect of substrate

AU - Nakayama, Tomoyuki

AU - Sakaue, Kenichi

AU - Ogawa, Takeshi

AU - Kobayashi, Yoshifumi

AU - Teratani, Takema

PY - 2009/10

Y1 - 2009/10

N2 - This paper discussed the fracture mechanism of diamond like carbon (DLC) film subjected to contact loading. The DLC films with the thickness of about 12μm were deposited onto SUS304, SUS410 and WC-Co substrates by radio frequency (RF) plasma-based ion implantation method. Dual indenter method was applied to determine the stress-strain response of the films. Rockwell indentation tests with simultaneous monitoring of acoustic emission (AE) and corrosion potential fluctuation (CPF) techniques were also applied to the films to evaluate the static tensile strength. FEM analyses demonstrated the stress distribution under indentation testing and correlated the film fracture behavior with static strength of the films, which was assumed to be independent of the substrate materials based on the results of Raman spectra and indentation tests. Cyclic indentation tests were performed on the DLC film deposited onto WC-Co in order to evaluate the fatigue strength of the film. The cyclic fatigue was found to degrade the film strength compared to the static property.

AB - This paper discussed the fracture mechanism of diamond like carbon (DLC) film subjected to contact loading. The DLC films with the thickness of about 12μm were deposited onto SUS304, SUS410 and WC-Co substrates by radio frequency (RF) plasma-based ion implantation method. Dual indenter method was applied to determine the stress-strain response of the films. Rockwell indentation tests with simultaneous monitoring of acoustic emission (AE) and corrosion potential fluctuation (CPF) techniques were also applied to the films to evaluate the static tensile strength. FEM analyses demonstrated the stress distribution under indentation testing and correlated the film fracture behavior with static strength of the films, which was assumed to be independent of the substrate materials based on the results of Raman spectra and indentation tests. Cyclic indentation tests were performed on the DLC film deposited onto WC-Co in order to evaluate the fatigue strength of the film. The cyclic fatigue was found to degrade the film strength compared to the static property.

KW - Acoustic emission

KW - Contact fracture

KW - Corrosion potential fluctuation

KW - Cyclic fatigue

KW - Diamond like carbon film

KW - Indentation

UR - http://www.scopus.com/inward/record.url?scp=75249096479&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=75249096479&partnerID=8YFLogxK

U2 - 10.2472/jsms.58.833

DO - 10.2472/jsms.58.833

M3 - Article

VL - 58

SP - 833

EP - 840

JO - Zairyo/Journal of the Society of Materials Science, Japan

JF - Zairyo/Journal of the Society of Materials Science, Japan

SN - 0514-5163

IS - 10

ER -