Abstract
Rebound number by rebound hummer for estimation of concrete strength decline by the repetitional use. And, it knows that there is a individual difference of the hammer. To get a proper measurement, we must take regularly certification and maintenance. This paper reports the result of the experiments about the decline by repetitional use and individual difference of each hammer. As those results, we propose the strategy and frequency of certification.
| Original language | English |
|---|---|
| Pages (from-to) | 19-22 |
| Number of pages | 4 |
| Journal | AIJ Journal of Technology and Design |
| Volume | 13 |
| Issue number | 25 |
| DOIs | |
| Publication status | Published - 2007 Jun |
| Externally published | Yes |
Fingerprint
Keywords
- Certification
- Non destructive test
- Rebound hammer
- Rebound number
- Test Anvil
ASJC Scopus subject areas
- Building and Construction
- Architecture
Cite this
Experimental study on the method and frequency of certification for rebound hammer. / Haruhata, Masakazu; Hamasaki, Hitoshi; Nagayama, Masaru; Yamamoto, Hideki.
In: AIJ Journal of Technology and Design, Vol. 13, No. 25, 06.2007, p. 19-22.Research output: Contribution to journal › Article
}
TY - JOUR
T1 - Experimental study on the method and frequency of certification for rebound hammer
AU - Haruhata, Masakazu
AU - Hamasaki, Hitoshi
AU - Nagayama, Masaru
AU - Yamamoto, Hideki
PY - 2007/6
Y1 - 2007/6
N2 - Rebound number by rebound hummer for estimation of concrete strength decline by the repetitional use. And, it knows that there is a individual difference of the hammer. To get a proper measurement, we must take regularly certification and maintenance. This paper reports the result of the experiments about the decline by repetitional use and individual difference of each hammer. As those results, we propose the strategy and frequency of certification.
AB - Rebound number by rebound hummer for estimation of concrete strength decline by the repetitional use. And, it knows that there is a individual difference of the hammer. To get a proper measurement, we must take regularly certification and maintenance. This paper reports the result of the experiments about the decline by repetitional use and individual difference of each hammer. As those results, we propose the strategy and frequency of certification.
KW - Certification
KW - Non destructive test
KW - Rebound hammer
KW - Rebound number
KW - Test Anvil
UR - http://www.scopus.com/inward/record.url?scp=79954532468&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=79954532468&partnerID=8YFLogxK
U2 - 10.3130/aijt.13.19
DO - 10.3130/aijt.13.19
M3 - Article
AN - SCOPUS:79954532468
VL - 13
SP - 19
EP - 22
JO - AIJ Journal of Technology and Design
JF - AIJ Journal of Technology and Design
SN - 1341-9463
IS - 25
ER -