Fault current limiting function of dynamic voltage restorer utilizing signals from existing protective relays

Nguyen Xuan Tung, Goro Fujita

Research output: Contribution to journalArticle

Abstract

Dynamic voltage restorer (DVR) is a series custom compensator used in power distribution network; however, due to the fact that it is connected in series with the distribution line, DVR would suffer from downstream faults. To limit the flow of large fault currents and protect DVR itself as well, a fault current limiting function is proposed in the DVR control strategy. Fault current limiting function of DVR will be activated by the protection system and then DVR will start injecting a series voltage to the line in such a way as to limit fault current to an appropriate level (in accordance with required sensitivity of the protection systems). The contribution of this proposal is the use of signals from existing feeder protection system to activate the DVR. This will simplify the structure of DVR because the extra build-in fault detection module is not required. Moreover, it will ensure proper coordination between DVR and protection systems.

Original languageEnglish
Pages (from-to)328-336
Number of pages9
JournalIEEJ Transactions on Electrical and Electronic Engineering
Volume5
Issue number3
DOIs
Publication statusPublished - 2010 May

Fingerprint

Relay protection
Electric fault currents
Electric potential
Fault detection
Electric power distribution
Voltage control

Keywords

  • Dynamic voltage restorer
  • Fault current limiter
  • Protection system

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Cite this

@article{622b5b8d01f34d03afae63d17c0b426e,
title = "Fault current limiting function of dynamic voltage restorer utilizing signals from existing protective relays",
abstract = "Dynamic voltage restorer (DVR) is a series custom compensator used in power distribution network; however, due to the fact that it is connected in series with the distribution line, DVR would suffer from downstream faults. To limit the flow of large fault currents and protect DVR itself as well, a fault current limiting function is proposed in the DVR control strategy. Fault current limiting function of DVR will be activated by the protection system and then DVR will start injecting a series voltage to the line in such a way as to limit fault current to an appropriate level (in accordance with required sensitivity of the protection systems). The contribution of this proposal is the use of signals from existing feeder protection system to activate the DVR. This will simplify the structure of DVR because the extra build-in fault detection module is not required. Moreover, it will ensure proper coordination between DVR and protection systems.",
keywords = "Dynamic voltage restorer, Fault current limiter, Protection system",
author = "Tung, {Nguyen Xuan} and Goro Fujita",
year = "2010",
month = "5",
doi = "10.1002/tee.20538",
language = "English",
volume = "5",
pages = "328--336",
journal = "IEEJ Transactions on Electrical and Electronic Engineering",
issn = "1931-4973",
publisher = "John Wiley and Sons Inc.",
number = "3",

}

TY - JOUR

T1 - Fault current limiting function of dynamic voltage restorer utilizing signals from existing protective relays

AU - Tung, Nguyen Xuan

AU - Fujita, Goro

PY - 2010/5

Y1 - 2010/5

N2 - Dynamic voltage restorer (DVR) is a series custom compensator used in power distribution network; however, due to the fact that it is connected in series with the distribution line, DVR would suffer from downstream faults. To limit the flow of large fault currents and protect DVR itself as well, a fault current limiting function is proposed in the DVR control strategy. Fault current limiting function of DVR will be activated by the protection system and then DVR will start injecting a series voltage to the line in such a way as to limit fault current to an appropriate level (in accordance with required sensitivity of the protection systems). The contribution of this proposal is the use of signals from existing feeder protection system to activate the DVR. This will simplify the structure of DVR because the extra build-in fault detection module is not required. Moreover, it will ensure proper coordination between DVR and protection systems.

AB - Dynamic voltage restorer (DVR) is a series custom compensator used in power distribution network; however, due to the fact that it is connected in series with the distribution line, DVR would suffer from downstream faults. To limit the flow of large fault currents and protect DVR itself as well, a fault current limiting function is proposed in the DVR control strategy. Fault current limiting function of DVR will be activated by the protection system and then DVR will start injecting a series voltage to the line in such a way as to limit fault current to an appropriate level (in accordance with required sensitivity of the protection systems). The contribution of this proposal is the use of signals from existing feeder protection system to activate the DVR. This will simplify the structure of DVR because the extra build-in fault detection module is not required. Moreover, it will ensure proper coordination between DVR and protection systems.

KW - Dynamic voltage restorer

KW - Fault current limiter

KW - Protection system

UR - http://www.scopus.com/inward/record.url?scp=77954432548&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=77954432548&partnerID=8YFLogxK

U2 - 10.1002/tee.20538

DO - 10.1002/tee.20538

M3 - Article

VL - 5

SP - 328

EP - 336

JO - IEEJ Transactions on Electrical and Electronic Engineering

JF - IEEJ Transactions on Electrical and Electronic Engineering

SN - 1931-4973

IS - 3

ER -