Field trapping property of HTS bulk magnet with reduced voids in pulsed field magnetizing process

Tetsuo Oka, H. Seki, D. Ishiduka, J. Ogawa, S. Fukui, T. Sato, K. Yokoyama, A. Murakami

Research output: Contribution to journalConference article

5 Citations (Scopus)

Abstract

The field trapping ability of melt-textured bulk superconductors is usually restricted by the mechanical properties because of the magnetic stress induced in the samples during the activation processes which give them intense magnetic fields of several T Therefore it is of crucial importance to enhance the toughness of the materials by means of reinforcing techniques. In this experiment, we adopted a dense Dy-based HTS bulk sample fabricated by means of controlling the concentration of voids inside during the heat treatment. A single magnetic pulse fields up to 7.66 T have been applied in the temperature range down to 30.6 K with use of GM refrigerator and the profiles of pulsed fields and the resultant trapped fields are discussed with respect to their performances. It was found that the trapped field grows as elongating rise time of the pulsed field and lowering initial temperature. The densely fabricated Dy123 sample was activated up to 1.98 T at 31 K in the same manner with no substantial difference from the porous Gd123 samples when the magnetic pulse field of 7.66 T was applied. The temperature rises up to 20 K are not substancial in comparison to those of the Gd123 compounds which exhibit the temperature rises more than 30 K at 40 K by applying 4.64 T This is attributed to the fact that the Jc value of the dense Dy123 are inferior to that of Gd123, which reflectes the field trapping ability.

Original languageEnglish
Article number022089
JournalJournal of Physics: Conference Series
Volume400
Issue numberPART 2
DOIs
Publication statusPublished - 2012 Jan 1
Externally publishedYes
Event26th International Conference on Low Temperature Physics, LT 2011 - Beijing, China
Duration: 2011 Aug 102011 Aug 17

Fingerprint

voids
magnets
trapping
temperature
refrigerators
toughness
pulses
heat treatment
activation
mechanical properties
profiles
magnetic fields

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Cite this

Field trapping property of HTS bulk magnet with reduced voids in pulsed field magnetizing process. / Oka, Tetsuo; Seki, H.; Ishiduka, D.; Ogawa, J.; Fukui, S.; Sato, T.; Yokoyama, K.; Murakami, A.

In: Journal of Physics: Conference Series, Vol. 400, No. PART 2, 022089, 01.01.2012.

Research output: Contribution to journalConference article

Oka, Tetsuo ; Seki, H. ; Ishiduka, D. ; Ogawa, J. ; Fukui, S. ; Sato, T. ; Yokoyama, K. ; Murakami, A. / Field trapping property of HTS bulk magnet with reduced voids in pulsed field magnetizing process. In: Journal of Physics: Conference Series. 2012 ; Vol. 400, No. PART 2.
@article{828b9561c07e42e0a49923eaafa2a26b,
title = "Field trapping property of HTS bulk magnet with reduced voids in pulsed field magnetizing process",
abstract = "The field trapping ability of melt-textured bulk superconductors is usually restricted by the mechanical properties because of the magnetic stress induced in the samples during the activation processes which give them intense magnetic fields of several T Therefore it is of crucial importance to enhance the toughness of the materials by means of reinforcing techniques. In this experiment, we adopted a dense Dy-based HTS bulk sample fabricated by means of controlling the concentration of voids inside during the heat treatment. A single magnetic pulse fields up to 7.66 T have been applied in the temperature range down to 30.6 K with use of GM refrigerator and the profiles of pulsed fields and the resultant trapped fields are discussed with respect to their performances. It was found that the trapped field grows as elongating rise time of the pulsed field and lowering initial temperature. The densely fabricated Dy123 sample was activated up to 1.98 T at 31 K in the same manner with no substantial difference from the porous Gd123 samples when the magnetic pulse field of 7.66 T was applied. The temperature rises up to 20 K are not substancial in comparison to those of the Gd123 compounds which exhibit the temperature rises more than 30 K at 40 K by applying 4.64 T This is attributed to the fact that the Jc value of the dense Dy123 are inferior to that of Gd123, which reflectes the field trapping ability.",
author = "Tetsuo Oka and H. Seki and D. Ishiduka and J. Ogawa and S. Fukui and T. Sato and K. Yokoyama and A. Murakami",
year = "2012",
month = "1",
day = "1",
doi = "10.1088/1742-6596/400/2/022089",
language = "English",
volume = "400",
journal = "Journal of Physics: Conference Series",
issn = "1742-6588",
publisher = "IOP Publishing Ltd.",
number = "PART 2",

}

TY - JOUR

T1 - Field trapping property of HTS bulk magnet with reduced voids in pulsed field magnetizing process

AU - Oka, Tetsuo

AU - Seki, H.

AU - Ishiduka, D.

AU - Ogawa, J.

AU - Fukui, S.

AU - Sato, T.

AU - Yokoyama, K.

AU - Murakami, A.

PY - 2012/1/1

Y1 - 2012/1/1

N2 - The field trapping ability of melt-textured bulk superconductors is usually restricted by the mechanical properties because of the magnetic stress induced in the samples during the activation processes which give them intense magnetic fields of several T Therefore it is of crucial importance to enhance the toughness of the materials by means of reinforcing techniques. In this experiment, we adopted a dense Dy-based HTS bulk sample fabricated by means of controlling the concentration of voids inside during the heat treatment. A single magnetic pulse fields up to 7.66 T have been applied in the temperature range down to 30.6 K with use of GM refrigerator and the profiles of pulsed fields and the resultant trapped fields are discussed with respect to their performances. It was found that the trapped field grows as elongating rise time of the pulsed field and lowering initial temperature. The densely fabricated Dy123 sample was activated up to 1.98 T at 31 K in the same manner with no substantial difference from the porous Gd123 samples when the magnetic pulse field of 7.66 T was applied. The temperature rises up to 20 K are not substancial in comparison to those of the Gd123 compounds which exhibit the temperature rises more than 30 K at 40 K by applying 4.64 T This is attributed to the fact that the Jc value of the dense Dy123 are inferior to that of Gd123, which reflectes the field trapping ability.

AB - The field trapping ability of melt-textured bulk superconductors is usually restricted by the mechanical properties because of the magnetic stress induced in the samples during the activation processes which give them intense magnetic fields of several T Therefore it is of crucial importance to enhance the toughness of the materials by means of reinforcing techniques. In this experiment, we adopted a dense Dy-based HTS bulk sample fabricated by means of controlling the concentration of voids inside during the heat treatment. A single magnetic pulse fields up to 7.66 T have been applied in the temperature range down to 30.6 K with use of GM refrigerator and the profiles of pulsed fields and the resultant trapped fields are discussed with respect to their performances. It was found that the trapped field grows as elongating rise time of the pulsed field and lowering initial temperature. The densely fabricated Dy123 sample was activated up to 1.98 T at 31 K in the same manner with no substantial difference from the porous Gd123 samples when the magnetic pulse field of 7.66 T was applied. The temperature rises up to 20 K are not substancial in comparison to those of the Gd123 compounds which exhibit the temperature rises more than 30 K at 40 K by applying 4.64 T This is attributed to the fact that the Jc value of the dense Dy123 are inferior to that of Gd123, which reflectes the field trapping ability.

UR - http://www.scopus.com/inward/record.url?scp=84873614915&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84873614915&partnerID=8YFLogxK

U2 - 10.1088/1742-6596/400/2/022089

DO - 10.1088/1742-6596/400/2/022089

M3 - Conference article

VL - 400

JO - Journal of Physics: Conference Series

JF - Journal of Physics: Conference Series

SN - 1742-6588

IS - PART 2

M1 - 022089

ER -