Flow injection determination of anionic polyelectrolytes using an anionic surfactant-selective plasticized poly(vinyl chloride) membrane electrode detector

Takashi Masadome, Toshihiko Imato, Satoshi Itoh, Yasukazu Asano

Research output: Contribution to journalArticle

9 Citations (Scopus)

Abstract

A potentiometric flow injection method for the determination of anionic polyelectrolytes utilizing a flow-through type surfactant-selective electrode detector is described. The method is based on the detection of the concentration increase of anionic surfactant liberated from a reagent stream containing an ion associate between cationic polyelectrolyte, poly(diallyldimethylammonium chloride) and anionic surfactant, dodecylbenzenesulfonate, which is caused by the formation of a polyion complex between cationic and anionic polyelectrolytes. The response of the electrode detector as a peak-shaped signal was obtained for injected anionic polyelectrolyte samples. A linear relationship was found to exist between peak height and the logarithmic concentration of potassium poly (vinyl sulfate) (PVSK) with a slope of 30 mV decade-1 in a concentration range of 1.0 × 10-4 to 1.0 × 10-3 mol/L. Identical relationships were obtained for sodium alginate and carageenan (also anionic polyelectrolytes) as for PVSK but with a lower sensitivity. The detection limit for PVSK was 2.5 × 10-5 mol/L. The relative standard deviation for 5 injections of a 2.5 × 10-4 mol/L PVSK solution was 1.3% and the sampling rate was ca. 10 samples h-1.

Original languageEnglish
Pages (from-to)901-903
Number of pages3
JournalFresenius' Journal of Analytical Chemistry
Volume357
Issue number7
Publication statusPublished - 1997
Externally publishedYes

Fingerprint

Vinyl Chloride
Anionic surfactants
Polyelectrolytes
Detectors
Membranes
Electrodes
Surface-Active Agents
Sulfates
Potassium
Ions
Sampling

ASJC Scopus subject areas

  • Biochemistry

Cite this

Flow injection determination of anionic polyelectrolytes using an anionic surfactant-selective plasticized poly(vinyl chloride) membrane electrode detector. / Masadome, Takashi; Imato, Toshihiko; Itoh, Satoshi; Asano, Yasukazu.

In: Fresenius' Journal of Analytical Chemistry, Vol. 357, No. 7, 1997, p. 901-903.

Research output: Contribution to journalArticle

@article{2fcde9e0cff040858dd55f01de3be00f,
title = "Flow injection determination of anionic polyelectrolytes using an anionic surfactant-selective plasticized poly(vinyl chloride) membrane electrode detector",
abstract = "A potentiometric flow injection method for the determination of anionic polyelectrolytes utilizing a flow-through type surfactant-selective electrode detector is described. The method is based on the detection of the concentration increase of anionic surfactant liberated from a reagent stream containing an ion associate between cationic polyelectrolyte, poly(diallyldimethylammonium chloride) and anionic surfactant, dodecylbenzenesulfonate, which is caused by the formation of a polyion complex between cationic and anionic polyelectrolytes. The response of the electrode detector as a peak-shaped signal was obtained for injected anionic polyelectrolyte samples. A linear relationship was found to exist between peak height and the logarithmic concentration of potassium poly (vinyl sulfate) (PVSK) with a slope of 30 mV decade-1 in a concentration range of 1.0 × 10-4 to 1.0 × 10-3 mol/L. Identical relationships were obtained for sodium alginate and carageenan (also anionic polyelectrolytes) as for PVSK but with a lower sensitivity. The detection limit for PVSK was 2.5 × 10-5 mol/L. The relative standard deviation for 5 injections of a 2.5 × 10-4 mol/L PVSK solution was 1.3{\%} and the sampling rate was ca. 10 samples h-1.",
author = "Takashi Masadome and Toshihiko Imato and Satoshi Itoh and Yasukazu Asano",
year = "1997",
language = "English",
volume = "357",
pages = "901--903",
journal = "Fresenius Zeitschrift fur Analytische Chemie",
issn = "0016-1152",
publisher = "Springer Verlag",
number = "7",

}

TY - JOUR

T1 - Flow injection determination of anionic polyelectrolytes using an anionic surfactant-selective plasticized poly(vinyl chloride) membrane electrode detector

AU - Masadome, Takashi

AU - Imato, Toshihiko

AU - Itoh, Satoshi

AU - Asano, Yasukazu

PY - 1997

Y1 - 1997

N2 - A potentiometric flow injection method for the determination of anionic polyelectrolytes utilizing a flow-through type surfactant-selective electrode detector is described. The method is based on the detection of the concentration increase of anionic surfactant liberated from a reagent stream containing an ion associate between cationic polyelectrolyte, poly(diallyldimethylammonium chloride) and anionic surfactant, dodecylbenzenesulfonate, which is caused by the formation of a polyion complex between cationic and anionic polyelectrolytes. The response of the electrode detector as a peak-shaped signal was obtained for injected anionic polyelectrolyte samples. A linear relationship was found to exist between peak height and the logarithmic concentration of potassium poly (vinyl sulfate) (PVSK) with a slope of 30 mV decade-1 in a concentration range of 1.0 × 10-4 to 1.0 × 10-3 mol/L. Identical relationships were obtained for sodium alginate and carageenan (also anionic polyelectrolytes) as for PVSK but with a lower sensitivity. The detection limit for PVSK was 2.5 × 10-5 mol/L. The relative standard deviation for 5 injections of a 2.5 × 10-4 mol/L PVSK solution was 1.3% and the sampling rate was ca. 10 samples h-1.

AB - A potentiometric flow injection method for the determination of anionic polyelectrolytes utilizing a flow-through type surfactant-selective electrode detector is described. The method is based on the detection of the concentration increase of anionic surfactant liberated from a reagent stream containing an ion associate between cationic polyelectrolyte, poly(diallyldimethylammonium chloride) and anionic surfactant, dodecylbenzenesulfonate, which is caused by the formation of a polyion complex between cationic and anionic polyelectrolytes. The response of the electrode detector as a peak-shaped signal was obtained for injected anionic polyelectrolyte samples. A linear relationship was found to exist between peak height and the logarithmic concentration of potassium poly (vinyl sulfate) (PVSK) with a slope of 30 mV decade-1 in a concentration range of 1.0 × 10-4 to 1.0 × 10-3 mol/L. Identical relationships were obtained for sodium alginate and carageenan (also anionic polyelectrolytes) as for PVSK but with a lower sensitivity. The detection limit for PVSK was 2.5 × 10-5 mol/L. The relative standard deviation for 5 injections of a 2.5 × 10-4 mol/L PVSK solution was 1.3% and the sampling rate was ca. 10 samples h-1.

UR - http://www.scopus.com/inward/record.url?scp=0000684490&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0000684490&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:0000684490

VL - 357

SP - 901

EP - 903

JO - Fresenius Zeitschrift fur Analytische Chemie

JF - Fresenius Zeitschrift fur Analytische Chemie

SN - 0016-1152

IS - 7

ER -