Friction and Wear of Sintered Alumina at High Temperature

Tetsuya Senda, Chiori Iino, Susumu Uematsu, Shigeyasu Amada

Research output: Contribution to journalArticle

5 Citations (Scopus)

Abstract

The frictional behavior of alumina ceramics was investigated at various temperatures up to 1200°C. The coefficient of friction decreased with increasing temperature and this temperature dependency became more pronounced as higher contact pressures were applied. Wear loss at room temperature could be interpreted as being caused by one of either two different behavior modes. These have a rate difference of a factor of ten. At temperatures higher than 800°C, the wear loss was far less than that at lower temperatures and a smooth, flat friction face, which should be responsible for the low friction coefficient and small wear loss, was observed.

Original languageEnglish
Pages (from-to)2422-2427
Number of pages6
JournalTransactions of the Japan Society of Mechanical Engineers Series C
Volume57
Issue number539
DOIs
Publication statusPublished - 1991 Jan 1
Externally publishedYes

Fingerprint

Sintered alumina
Wear of materials
Friction
Temperature
Alumina

Keywords

  • Alumina
  • Ceramics
  • Coefficient of Friction
  • Friction
  • High Temperature
  • Tribology
  • Wear
  • Wear Loss

ASJC Scopus subject areas

  • Mechanics of Materials
  • Mechanical Engineering
  • Industrial and Manufacturing Engineering

Cite this

Friction and Wear of Sintered Alumina at High Temperature. / Senda, Tetsuya; Iino, Chiori; Uematsu, Susumu; Amada, Shigeyasu.

In: Transactions of the Japan Society of Mechanical Engineers Series C, Vol. 57, No. 539, 01.01.1991, p. 2422-2427.

Research output: Contribution to journalArticle

Senda, Tetsuya ; Iino, Chiori ; Uematsu, Susumu ; Amada, Shigeyasu. / Friction and Wear of Sintered Alumina at High Temperature. In: Transactions of the Japan Society of Mechanical Engineers Series C. 1991 ; Vol. 57, No. 539. pp. 2422-2427.
@article{37d20414dfe14b32b17fd316208835cc,
title = "Friction and Wear of Sintered Alumina at High Temperature",
abstract = "The frictional behavior of alumina ceramics was investigated at various temperatures up to 1200°C. The coefficient of friction decreased with increasing temperature and this temperature dependency became more pronounced as higher contact pressures were applied. Wear loss at room temperature could be interpreted as being caused by one of either two different behavior modes. These have a rate difference of a factor of ten. At temperatures higher than 800°C, the wear loss was far less than that at lower temperatures and a smooth, flat friction face, which should be responsible for the low friction coefficient and small wear loss, was observed.",
keywords = "Alumina, Ceramics, Coefficient of Friction, Friction, High Temperature, Tribology, Wear, Wear Loss",
author = "Tetsuya Senda and Chiori Iino and Susumu Uematsu and Shigeyasu Amada",
year = "1991",
month = "1",
day = "1",
doi = "10.1299/kikaic.57.2422",
language = "English",
volume = "57",
pages = "2422--2427",
journal = "Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C",
issn = "0387-5024",
publisher = "Japan Society of Mechanical Engineers",
number = "539",

}

TY - JOUR

T1 - Friction and Wear of Sintered Alumina at High Temperature

AU - Senda, Tetsuya

AU - Iino, Chiori

AU - Uematsu, Susumu

AU - Amada, Shigeyasu

PY - 1991/1/1

Y1 - 1991/1/1

N2 - The frictional behavior of alumina ceramics was investigated at various temperatures up to 1200°C. The coefficient of friction decreased with increasing temperature and this temperature dependency became more pronounced as higher contact pressures were applied. Wear loss at room temperature could be interpreted as being caused by one of either two different behavior modes. These have a rate difference of a factor of ten. At temperatures higher than 800°C, the wear loss was far less than that at lower temperatures and a smooth, flat friction face, which should be responsible for the low friction coefficient and small wear loss, was observed.

AB - The frictional behavior of alumina ceramics was investigated at various temperatures up to 1200°C. The coefficient of friction decreased with increasing temperature and this temperature dependency became more pronounced as higher contact pressures were applied. Wear loss at room temperature could be interpreted as being caused by one of either two different behavior modes. These have a rate difference of a factor of ten. At temperatures higher than 800°C, the wear loss was far less than that at lower temperatures and a smooth, flat friction face, which should be responsible for the low friction coefficient and small wear loss, was observed.

KW - Alumina

KW - Ceramics

KW - Coefficient of Friction

KW - Friction

KW - High Temperature

KW - Tribology

KW - Wear

KW - Wear Loss

UR - http://www.scopus.com/inward/record.url?scp=0026194179&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0026194179&partnerID=8YFLogxK

U2 - 10.1299/kikaic.57.2422

DO - 10.1299/kikaic.57.2422

M3 - Article

VL - 57

SP - 2422

EP - 2427

JO - Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C

JF - Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C

SN - 0387-5024

IS - 539

ER -