High-temperature superconducting motor using y-ba-cu-0 bulk magnets

Yoshitaka Itoh, Yousuke Yanagi, Masaaki Yoshikawa, Tetsuo Oka, Shintaro Harada, Tsutomu Sakakibara, Yuh Yamada, Uichiro Mizutani

Research output: Contribution to journalArticle

65 Citations (Scopus)

Abstract

A DC motor equipped with melt-processed Y-Ba-Cu-0 (YBCO) superconductors as field magnets was constructed. The YBCO bulks were magnetized at temperatures of 65-77 K in a liquid nitrogen vessel by applying a pulsed magnetic field. The maximum output power was 940 W when the YBCO bulks were cooled to 65 K. Continuous running tests were carried out for up to 6 h. We found that the trapped magnetic fluxes are hardly affected by the magnetic field of 7500 A/m generated by the armature current and that cooling of the YBCO bulks to low temperatures is very effective for holding the trapped field at a high level and, hence, substantially elevating the performance of a high-temperature superconducting (HTSC) motor.

Original languageEnglish
Pages (from-to)5574-5578
Number of pages5
JournalJapanese Journal of Applied Physics
Volume34
Issue number10
DOIs
Publication statusPublished - 1995 Oct

    Fingerprint

Keywords

  • Bulk magnet
  • Melt process
  • Pulse magnetization
  • Superconducting motor
  • Trapped magnetic field
  • Y-Ba-Cu-O

ASJC Scopus subject areas

  • Engineering(all)
  • Physics and Astronomy(all)

Cite this

Itoh, Y., Yanagi, Y., Yoshikawa, M., Oka, T., Harada, S., Sakakibara, T., Yamada, Y., & Mizutani, U. (1995). High-temperature superconducting motor using y-ba-cu-0 bulk magnets. Japanese Journal of Applied Physics, 34(10), 5574-5578. https://doi.org/10.1143/JJAP.34.5574