Impact of fault resistance on impedance relay

Adaptive Mho directional type scheme development using LabVIEW

David Majambere, Goro Fujita

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Normally, fault resistances come out with errors in the fault calculation algorithm on conventional Mho distance protection scheme which might force the relay to under-reach/over-reach based on the network conditions. With a constrained shape, Mho Directional distance elements can provide more resistive coverage while discriminating between forward and reverse faults. In this work, the recurring effect a fault resistance can have on a Mho Distance protection scheme relay is assessed and analyzed for single line-to-ground(SLG) faults for both protective schemes. Finally, an adaptive correction algorithm is applied to compensate errors introduced in the fault calculation unit using local end data. The design and simulation are performed using LabVIEW and MATLAB/SIMULINK. Magnitudes and angles of three voltages and currents are obtained through Discrete Fourier Transform(DFT). Different scenarios are carried out and validate the effectiveness of the scheme. Moreover, an improved Graphical User Interface(GUI) is developed for easy and convenient interaction between users and the relay model.

Original languageEnglish
Title of host publicationTENCON 2017 - 2017 IEEE Region 10 Conference
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages3006-3011
Number of pages6
Volume2017-December
ISBN (Electronic)9781509011339
DOIs
Publication statusPublished - 2017 Dec 19
Event2017 IEEE Region 10 Conference, TENCON 2017 - Penang, Malaysia
Duration: 2017 Nov 52017 Nov 8

Other

Other2017 IEEE Region 10 Conference, TENCON 2017
CountryMalaysia
CityPenang
Period17/11/517/11/8

Fingerprint

Relay protection
Graphical user interfaces
Discrete Fourier transforms
MATLAB
Electric potential

Keywords

  • Conventional Mho
  • Directional Mho
  • Distance relay
  • Fault location
  • Fault resistance
  • Graphical User Interface
  • LabVIEW
  • MATLAB/SIMULINK

ASJC Scopus subject areas

  • Computer Science Applications
  • Electrical and Electronic Engineering

Cite this

Majambere, D., & Fujita, G. (2017). Impact of fault resistance on impedance relay: Adaptive Mho directional type scheme development using LabVIEW. In TENCON 2017 - 2017 IEEE Region 10 Conference (Vol. 2017-December, pp. 3006-3011). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/TENCON.2017.8228377

Impact of fault resistance on impedance relay : Adaptive Mho directional type scheme development using LabVIEW. / Majambere, David; Fujita, Goro.

TENCON 2017 - 2017 IEEE Region 10 Conference. Vol. 2017-December Institute of Electrical and Electronics Engineers Inc., 2017. p. 3006-3011.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Majambere, D & Fujita, G 2017, Impact of fault resistance on impedance relay: Adaptive Mho directional type scheme development using LabVIEW. in TENCON 2017 - 2017 IEEE Region 10 Conference. vol. 2017-December, Institute of Electrical and Electronics Engineers Inc., pp. 3006-3011, 2017 IEEE Region 10 Conference, TENCON 2017, Penang, Malaysia, 17/11/5. https://doi.org/10.1109/TENCON.2017.8228377
Majambere D, Fujita G. Impact of fault resistance on impedance relay: Adaptive Mho directional type scheme development using LabVIEW. In TENCON 2017 - 2017 IEEE Region 10 Conference. Vol. 2017-December. Institute of Electrical and Electronics Engineers Inc. 2017. p. 3006-3011 https://doi.org/10.1109/TENCON.2017.8228377
Majambere, David ; Fujita, Goro. / Impact of fault resistance on impedance relay : Adaptive Mho directional type scheme development using LabVIEW. TENCON 2017 - 2017 IEEE Region 10 Conference. Vol. 2017-December Institute of Electrical and Electronics Engineers Inc., 2017. pp. 3006-3011
@inproceedings{7ae5b0302e044a11815b0bac0405f5d9,
title = "Impact of fault resistance on impedance relay: Adaptive Mho directional type scheme development using LabVIEW",
abstract = "Normally, fault resistances come out with errors in the fault calculation algorithm on conventional Mho distance protection scheme which might force the relay to under-reach/over-reach based on the network conditions. With a constrained shape, Mho Directional distance elements can provide more resistive coverage while discriminating between forward and reverse faults. In this work, the recurring effect a fault resistance can have on a Mho Distance protection scheme relay is assessed and analyzed for single line-to-ground(SLG) faults for both protective schemes. Finally, an adaptive correction algorithm is applied to compensate errors introduced in the fault calculation unit using local end data. The design and simulation are performed using LabVIEW and MATLAB/SIMULINK. Magnitudes and angles of three voltages and currents are obtained through Discrete Fourier Transform(DFT). Different scenarios are carried out and validate the effectiveness of the scheme. Moreover, an improved Graphical User Interface(GUI) is developed for easy and convenient interaction between users and the relay model.",
keywords = "Conventional Mho, Directional Mho, Distance relay, Fault location, Fault resistance, Graphical User Interface, LabVIEW, MATLAB/SIMULINK",
author = "David Majambere and Goro Fujita",
year = "2017",
month = "12",
day = "19",
doi = "10.1109/TENCON.2017.8228377",
language = "English",
volume = "2017-December",
pages = "3006--3011",
booktitle = "TENCON 2017 - 2017 IEEE Region 10 Conference",
publisher = "Institute of Electrical and Electronics Engineers Inc.",

}

TY - GEN

T1 - Impact of fault resistance on impedance relay

T2 - Adaptive Mho directional type scheme development using LabVIEW

AU - Majambere, David

AU - Fujita, Goro

PY - 2017/12/19

Y1 - 2017/12/19

N2 - Normally, fault resistances come out with errors in the fault calculation algorithm on conventional Mho distance protection scheme which might force the relay to under-reach/over-reach based on the network conditions. With a constrained shape, Mho Directional distance elements can provide more resistive coverage while discriminating between forward and reverse faults. In this work, the recurring effect a fault resistance can have on a Mho Distance protection scheme relay is assessed and analyzed for single line-to-ground(SLG) faults for both protective schemes. Finally, an adaptive correction algorithm is applied to compensate errors introduced in the fault calculation unit using local end data. The design and simulation are performed using LabVIEW and MATLAB/SIMULINK. Magnitudes and angles of three voltages and currents are obtained through Discrete Fourier Transform(DFT). Different scenarios are carried out and validate the effectiveness of the scheme. Moreover, an improved Graphical User Interface(GUI) is developed for easy and convenient interaction between users and the relay model.

AB - Normally, fault resistances come out with errors in the fault calculation algorithm on conventional Mho distance protection scheme which might force the relay to under-reach/over-reach based on the network conditions. With a constrained shape, Mho Directional distance elements can provide more resistive coverage while discriminating between forward and reverse faults. In this work, the recurring effect a fault resistance can have on a Mho Distance protection scheme relay is assessed and analyzed for single line-to-ground(SLG) faults for both protective schemes. Finally, an adaptive correction algorithm is applied to compensate errors introduced in the fault calculation unit using local end data. The design and simulation are performed using LabVIEW and MATLAB/SIMULINK. Magnitudes and angles of three voltages and currents are obtained through Discrete Fourier Transform(DFT). Different scenarios are carried out and validate the effectiveness of the scheme. Moreover, an improved Graphical User Interface(GUI) is developed for easy and convenient interaction between users and the relay model.

KW - Conventional Mho

KW - Directional Mho

KW - Distance relay

KW - Fault location

KW - Fault resistance

KW - Graphical User Interface

KW - LabVIEW

KW - MATLAB/SIMULINK

UR - http://www.scopus.com/inward/record.url?scp=85044220388&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85044220388&partnerID=8YFLogxK

U2 - 10.1109/TENCON.2017.8228377

DO - 10.1109/TENCON.2017.8228377

M3 - Conference contribution

VL - 2017-December

SP - 3006

EP - 3011

BT - TENCON 2017 - 2017 IEEE Region 10 Conference

PB - Institute of Electrical and Electronics Engineers Inc.

ER -