Improvement of Delamination Strength of REBCO Coated Conductors

Masateru Yoshizumi, Naomichi Sakai, Teruo Izumi

Research output: Contribution to journalConference article

2 Citations (Scopus)

Abstract

Recent progress in development of RE 1 Ba 2 Cu 3 O x (REBCO, RE: Y and Rare Earth) coated conductors has been remarkable, which makes practical applications realistic. Considering the major applications, long coated conductors are expected to be used as coils. Improvement of delamination strength throughout the long tape is important issue as well to meet the requirements of those applications. Effect of processing on delamination strength was analyzed in this work. The delamination strength can be distinguished into 3 groups depending on the origins of delamination; weak strength (<30 MPa) occurred from MOD-GZO due to pores in it. Densification of the layer by using higher calcination temperature in the heat treatment eliminated this type of delamination. Middle strength (30- 50 MPa) was due to cracks near the bed layer/substrate interface which were caused by the oxygenation of metallic substrate due to exposure to high temperature during GdBCO deposition. It was clarified that shortening the deposition time is effective to minimize the effect. High strength (>50 MPa) was realized by elimination of those defects which can be controlled by optimization of the process. Statistical analysis showed the improved process gives only one weak spot per thousands of kilometers long tape. The improvement of processing was effective to obtain high delamination strength throughout long wires.

Original languageEnglish
Pages (from-to)150-153
Number of pages4
JournalPhysics Procedia
Volume58
DOIs
Publication statusPublished - 2013 Jan 1
Externally publishedYes
Event26th International Symposium on Superconductivity, ISS 2013 - Tokyo, Japan
Duration: 2013 Nov 182013 Nov 20

Fingerprint

conductors
tapes
high strength
statistical analysis
elimination
coils
rare earth elements
wire
requirements
optimization
defects

Keywords

  • coated conductors
  • delamination strength

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Cite this

Improvement of Delamination Strength of REBCO Coated Conductors. / Yoshizumi, Masateru; Sakai, Naomichi; Izumi, Teruo.

In: Physics Procedia, Vol. 58, 01.01.2013, p. 150-153.

Research output: Contribution to journalConference article

Yoshizumi, Masateru ; Sakai, Naomichi ; Izumi, Teruo. / Improvement of Delamination Strength of REBCO Coated Conductors. In: Physics Procedia. 2013 ; Vol. 58. pp. 150-153.
@article{6bb13eb6b5cd4f148c642ced11744794,
title = "Improvement of Delamination Strength of REBCO Coated Conductors",
abstract = "Recent progress in development of RE 1 Ba 2 Cu 3 O x (REBCO, RE: Y and Rare Earth) coated conductors has been remarkable, which makes practical applications realistic. Considering the major applications, long coated conductors are expected to be used as coils. Improvement of delamination strength throughout the long tape is important issue as well to meet the requirements of those applications. Effect of processing on delamination strength was analyzed in this work. The delamination strength can be distinguished into 3 groups depending on the origins of delamination; weak strength (<30 MPa) occurred from MOD-GZO due to pores in it. Densification of the layer by using higher calcination temperature in the heat treatment eliminated this type of delamination. Middle strength (30- 50 MPa) was due to cracks near the bed layer/substrate interface which were caused by the oxygenation of metallic substrate due to exposure to high temperature during GdBCO deposition. It was clarified that shortening the deposition time is effective to minimize the effect. High strength (>50 MPa) was realized by elimination of those defects which can be controlled by optimization of the process. Statistical analysis showed the improved process gives only one weak spot per thousands of kilometers long tape. The improvement of processing was effective to obtain high delamination strength throughout long wires.",
keywords = "coated conductors, delamination strength",
author = "Masateru Yoshizumi and Naomichi Sakai and Teruo Izumi",
year = "2013",
month = "1",
day = "1",
doi = "10.1016/j.phpro.2014.09.029",
language = "English",
volume = "58",
pages = "150--153",
journal = "Physics Procedia",
issn = "1875-3884",
publisher = "Elsevier BV",

}

TY - JOUR

T1 - Improvement of Delamination Strength of REBCO Coated Conductors

AU - Yoshizumi, Masateru

AU - Sakai, Naomichi

AU - Izumi, Teruo

PY - 2013/1/1

Y1 - 2013/1/1

N2 - Recent progress in development of RE 1 Ba 2 Cu 3 O x (REBCO, RE: Y and Rare Earth) coated conductors has been remarkable, which makes practical applications realistic. Considering the major applications, long coated conductors are expected to be used as coils. Improvement of delamination strength throughout the long tape is important issue as well to meet the requirements of those applications. Effect of processing on delamination strength was analyzed in this work. The delamination strength can be distinguished into 3 groups depending on the origins of delamination; weak strength (<30 MPa) occurred from MOD-GZO due to pores in it. Densification of the layer by using higher calcination temperature in the heat treatment eliminated this type of delamination. Middle strength (30- 50 MPa) was due to cracks near the bed layer/substrate interface which were caused by the oxygenation of metallic substrate due to exposure to high temperature during GdBCO deposition. It was clarified that shortening the deposition time is effective to minimize the effect. High strength (>50 MPa) was realized by elimination of those defects which can be controlled by optimization of the process. Statistical analysis showed the improved process gives only one weak spot per thousands of kilometers long tape. The improvement of processing was effective to obtain high delamination strength throughout long wires.

AB - Recent progress in development of RE 1 Ba 2 Cu 3 O x (REBCO, RE: Y and Rare Earth) coated conductors has been remarkable, which makes practical applications realistic. Considering the major applications, long coated conductors are expected to be used as coils. Improvement of delamination strength throughout the long tape is important issue as well to meet the requirements of those applications. Effect of processing on delamination strength was analyzed in this work. The delamination strength can be distinguished into 3 groups depending on the origins of delamination; weak strength (<30 MPa) occurred from MOD-GZO due to pores in it. Densification of the layer by using higher calcination temperature in the heat treatment eliminated this type of delamination. Middle strength (30- 50 MPa) was due to cracks near the bed layer/substrate interface which were caused by the oxygenation of metallic substrate due to exposure to high temperature during GdBCO deposition. It was clarified that shortening the deposition time is effective to minimize the effect. High strength (>50 MPa) was realized by elimination of those defects which can be controlled by optimization of the process. Statistical analysis showed the improved process gives only one weak spot per thousands of kilometers long tape. The improvement of processing was effective to obtain high delamination strength throughout long wires.

KW - coated conductors

KW - delamination strength

UR - http://www.scopus.com/inward/record.url?scp=84944515727&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84944515727&partnerID=8YFLogxK

U2 - 10.1016/j.phpro.2014.09.029

DO - 10.1016/j.phpro.2014.09.029

M3 - Conference article

AN - SCOPUS:84944515727

VL - 58

SP - 150

EP - 153

JO - Physics Procedia

JF - Physics Procedia

SN - 1875-3884

ER -