Improvement of hydrogen peroxide sensitivity by an electrochemiluminescent method with luminol using polyion adsorption onto the electrode

Yasuo Yoshimi, Masayuki Kamada, Yoshiyuki Ohkawara, Koji Hattori, Kiyotaka Sakai

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

Chemiluminescence (CL) of luminol with hydrogen peroxide is useful for the highly sensitive determination of biochemicals by conjugation with oxidase. However, the method has stability problems because reactant-mixing conditions influence the results. However, electrochemiluminescence (ECL) of luminol can be performed on well-mixed solutions of luminol and hydrogen peroxide. ECL has not yet been applied to the quantitative analysis of biochemicals due to low quantum yields at physiological pH. In this work, we evaluated the effect of modifying the electrode with cationic polymer on the ECL intensity of luminol. Transparent indium-tin oxide (ITO) electrode was treated with 1 wt% aqueous solution of polyethyleneimine (MW: 70,000) buffered by 0.1 M borate at pH 8.0. ECL intensity at the ITO electrode was measured in a mixed solution of 1.0 mM luminol and 10-30 μM hydrogen peroxide buffered by phosphate or Tris-HCl (pH 7.4). The electrode potential was applied in alternate pulses of 0.00 V versus Ag/AgCl for 3 s and 1.00 V for 3 s. The sensitivity of ECL to hydrogen peroxide concentration at the treated ITO increased remarkably. Results indicate that the cationic polymer adsorbed on the electrode enhances ECL by increasing pH in the vicinity of the electrode surface. However, the cationic polymer also enhanced inhibition of ECL by ascorbic acid, an anionic reducing reagent.

Original languageEnglish
Pages (from-to)747-750
Number of pages4
JournalElectrochemistry
Volume72
Issue number11
Publication statusPublished - 2004 Nov

Fingerprint

Luminol
Hydrogen peroxide
Hydrogen Peroxide
Adsorption
Electrodes
Tin oxides
Indium
Polymers
Polyethyleneimine
Borates
Chemiluminescence
Ascorbic acid
Quantum yield
Ascorbic Acid
Oxidoreductases
Phosphates
Chemical analysis
indium tin oxide

Keywords

  • Electrochemiluminescence
  • Hydrogen Peroxide
  • Luminol
  • Polyion
  • Sensitivity

ASJC Scopus subject areas

  • Electrochemistry

Cite this

Improvement of hydrogen peroxide sensitivity by an electrochemiluminescent method with luminol using polyion adsorption onto the electrode. / Yoshimi, Yasuo; Kamada, Masayuki; Ohkawara, Yoshiyuki; Hattori, Koji; Sakai, Kiyotaka.

In: Electrochemistry, Vol. 72, No. 11, 11.2004, p. 747-750.

Research output: Contribution to journalArticle

Yoshimi, Yasuo ; Kamada, Masayuki ; Ohkawara, Yoshiyuki ; Hattori, Koji ; Sakai, Kiyotaka. / Improvement of hydrogen peroxide sensitivity by an electrochemiluminescent method with luminol using polyion adsorption onto the electrode. In: Electrochemistry. 2004 ; Vol. 72, No. 11. pp. 747-750.
@article{f5b3be3c5e664b07bf527f8ac62df1a2,
title = "Improvement of hydrogen peroxide sensitivity by an electrochemiluminescent method with luminol using polyion adsorption onto the electrode",
abstract = "Chemiluminescence (CL) of luminol with hydrogen peroxide is useful for the highly sensitive determination of biochemicals by conjugation with oxidase. However, the method has stability problems because reactant-mixing conditions influence the results. However, electrochemiluminescence (ECL) of luminol can be performed on well-mixed solutions of luminol and hydrogen peroxide. ECL has not yet been applied to the quantitative analysis of biochemicals due to low quantum yields at physiological pH. In this work, we evaluated the effect of modifying the electrode with cationic polymer on the ECL intensity of luminol. Transparent indium-tin oxide (ITO) electrode was treated with 1 wt{\%} aqueous solution of polyethyleneimine (MW: 70,000) buffered by 0.1 M borate at pH 8.0. ECL intensity at the ITO electrode was measured in a mixed solution of 1.0 mM luminol and 10-30 μM hydrogen peroxide buffered by phosphate or Tris-HCl (pH 7.4). The electrode potential was applied in alternate pulses of 0.00 V versus Ag/AgCl for 3 s and 1.00 V for 3 s. The sensitivity of ECL to hydrogen peroxide concentration at the treated ITO increased remarkably. Results indicate that the cationic polymer adsorbed on the electrode enhances ECL by increasing pH in the vicinity of the electrode surface. However, the cationic polymer also enhanced inhibition of ECL by ascorbic acid, an anionic reducing reagent.",
keywords = "Electrochemiluminescence, Hydrogen Peroxide, Luminol, Polyion, Sensitivity",
author = "Yasuo Yoshimi and Masayuki Kamada and Yoshiyuki Ohkawara and Koji Hattori and Kiyotaka Sakai",
year = "2004",
month = "11",
language = "English",
volume = "72",
pages = "747--750",
journal = "Electrochemistry",
issn = "1344-3542",
publisher = "Electrochemical Society of Japan",
number = "11",

}

TY - JOUR

T1 - Improvement of hydrogen peroxide sensitivity by an electrochemiluminescent method with luminol using polyion adsorption onto the electrode

AU - Yoshimi, Yasuo

AU - Kamada, Masayuki

AU - Ohkawara, Yoshiyuki

AU - Hattori, Koji

AU - Sakai, Kiyotaka

PY - 2004/11

Y1 - 2004/11

N2 - Chemiluminescence (CL) of luminol with hydrogen peroxide is useful for the highly sensitive determination of biochemicals by conjugation with oxidase. However, the method has stability problems because reactant-mixing conditions influence the results. However, electrochemiluminescence (ECL) of luminol can be performed on well-mixed solutions of luminol and hydrogen peroxide. ECL has not yet been applied to the quantitative analysis of biochemicals due to low quantum yields at physiological pH. In this work, we evaluated the effect of modifying the electrode with cationic polymer on the ECL intensity of luminol. Transparent indium-tin oxide (ITO) electrode was treated with 1 wt% aqueous solution of polyethyleneimine (MW: 70,000) buffered by 0.1 M borate at pH 8.0. ECL intensity at the ITO electrode was measured in a mixed solution of 1.0 mM luminol and 10-30 μM hydrogen peroxide buffered by phosphate or Tris-HCl (pH 7.4). The electrode potential was applied in alternate pulses of 0.00 V versus Ag/AgCl for 3 s and 1.00 V for 3 s. The sensitivity of ECL to hydrogen peroxide concentration at the treated ITO increased remarkably. Results indicate that the cationic polymer adsorbed on the electrode enhances ECL by increasing pH in the vicinity of the electrode surface. However, the cationic polymer also enhanced inhibition of ECL by ascorbic acid, an anionic reducing reagent.

AB - Chemiluminescence (CL) of luminol with hydrogen peroxide is useful for the highly sensitive determination of biochemicals by conjugation with oxidase. However, the method has stability problems because reactant-mixing conditions influence the results. However, electrochemiluminescence (ECL) of luminol can be performed on well-mixed solutions of luminol and hydrogen peroxide. ECL has not yet been applied to the quantitative analysis of biochemicals due to low quantum yields at physiological pH. In this work, we evaluated the effect of modifying the electrode with cationic polymer on the ECL intensity of luminol. Transparent indium-tin oxide (ITO) electrode was treated with 1 wt% aqueous solution of polyethyleneimine (MW: 70,000) buffered by 0.1 M borate at pH 8.0. ECL intensity at the ITO electrode was measured in a mixed solution of 1.0 mM luminol and 10-30 μM hydrogen peroxide buffered by phosphate or Tris-HCl (pH 7.4). The electrode potential was applied in alternate pulses of 0.00 V versus Ag/AgCl for 3 s and 1.00 V for 3 s. The sensitivity of ECL to hydrogen peroxide concentration at the treated ITO increased remarkably. Results indicate that the cationic polymer adsorbed on the electrode enhances ECL by increasing pH in the vicinity of the electrode surface. However, the cationic polymer also enhanced inhibition of ECL by ascorbic acid, an anionic reducing reagent.

KW - Electrochemiluminescence

KW - Hydrogen Peroxide

KW - Luminol

KW - Polyion

KW - Sensitivity

UR - http://www.scopus.com/inward/record.url?scp=10944258391&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=10944258391&partnerID=8YFLogxK

M3 - Article

VL - 72

SP - 747

EP - 750

JO - Electrochemistry

JF - Electrochemistry

SN - 1344-3542

IS - 11

ER -