In-situ synthesis of Mg2Si intermetallics via powder metallurgy process

Katsuyoshi Kondoh, Hideki Oginuma, Atsushi Kimura, Shinji Matsukawa, Tatsuhiko Aizawa

Research output: Contribution to journalArticle

31 Citations (Scopus)

Abstract

The solid-state synthesis of Mg2Si intermetallic compounds has been evaluated in the present paper. The elemental magnesium and silicon powder mixture was employed as starting raw materials. In particular, the influence of the silicon particle by the repeated plastic working (RPW) on the in-situ formation of Mg2Si is discussed, based on the thermal and structural analysis results by DSC thermal analysis and XRD, respectively. Refined Si particles embedded uniformly in the magnesium matrix via RPW, can drive progressing Mg2Si synthesis at extremely low temperature; for example, the ignition temperature, Ts = 773 K, to commence the solid-state synthesis of raw powder mixture, was reduced to about 400-430 K. Further plastic working on the mixture causes in-situ formation of Mg2Si intermetallic compounds with a crystallite size of 30-80 nm. However, the ignition temperature to synthesize Mg2Si shifts to a higher temperature again. Regarding to the thermal stability of Mg2Si compounds, the particle size of in-situ synthesized Mg2Si compounds after annealing at 573 K for 900 s is about 30-100 nm, that is, the remarkable coarsening does not occur during annealing.

Original languageEnglish
Pages (from-to)981-985
Number of pages5
JournalMaterials Transactions
Volume44
Issue number5
Publication statusPublished - 2003 May
Externally publishedYes

Fingerprint

powder metallurgy
Powder metallurgy
Intermetallics
intermetallics
ignition temperature
plastics
magnesium
thermal analysis
Silicon
synthesis
Plastics
Powders
Magnesium
Thermoanalysis
solid state
Ignition
annealing
silicon
Annealing
structural analysis

Keywords

  • Exothermic
  • MgSi
  • Nano-structure
  • Repeated plastic working
  • Solid-state synthesis
  • Thermal stability

ASJC Scopus subject areas

  • Materials Science(all)
  • Metals and Alloys

Cite this

Kondoh, K., Oginuma, H., Kimura, A., Matsukawa, S., & Aizawa, T. (2003). In-situ synthesis of Mg2Si intermetallics via powder metallurgy process. Materials Transactions, 44(5), 981-985.

In-situ synthesis of Mg2Si intermetallics via powder metallurgy process. / Kondoh, Katsuyoshi; Oginuma, Hideki; Kimura, Atsushi; Matsukawa, Shinji; Aizawa, Tatsuhiko.

In: Materials Transactions, Vol. 44, No. 5, 05.2003, p. 981-985.

Research output: Contribution to journalArticle

Kondoh, K, Oginuma, H, Kimura, A, Matsukawa, S & Aizawa, T 2003, 'In-situ synthesis of Mg2Si intermetallics via powder metallurgy process', Materials Transactions, vol. 44, no. 5, pp. 981-985.
Kondoh K, Oginuma H, Kimura A, Matsukawa S, Aizawa T. In-situ synthesis of Mg2Si intermetallics via powder metallurgy process. Materials Transactions. 2003 May;44(5):981-985.
Kondoh, Katsuyoshi ; Oginuma, Hideki ; Kimura, Atsushi ; Matsukawa, Shinji ; Aizawa, Tatsuhiko. / In-situ synthesis of Mg2Si intermetallics via powder metallurgy process. In: Materials Transactions. 2003 ; Vol. 44, No. 5. pp. 981-985.
@article{319fe7343ab74c319c7183f917283bdb,
title = "In-situ synthesis of Mg2Si intermetallics via powder metallurgy process",
abstract = "The solid-state synthesis of Mg2Si intermetallic compounds has been evaluated in the present paper. The elemental magnesium and silicon powder mixture was employed as starting raw materials. In particular, the influence of the silicon particle by the repeated plastic working (RPW) on the in-situ formation of Mg2Si is discussed, based on the thermal and structural analysis results by DSC thermal analysis and XRD, respectively. Refined Si particles embedded uniformly in the magnesium matrix via RPW, can drive progressing Mg2Si synthesis at extremely low temperature; for example, the ignition temperature, Ts = 773 K, to commence the solid-state synthesis of raw powder mixture, was reduced to about 400-430 K. Further plastic working on the mixture causes in-situ formation of Mg2Si intermetallic compounds with a crystallite size of 30-80 nm. However, the ignition temperature to synthesize Mg2Si shifts to a higher temperature again. Regarding to the thermal stability of Mg2Si compounds, the particle size of in-situ synthesized Mg2Si compounds after annealing at 573 K for 900 s is about 30-100 nm, that is, the remarkable coarsening does not occur during annealing.",
keywords = "Exothermic, MgSi, Nano-structure, Repeated plastic working, Solid-state synthesis, Thermal stability",
author = "Katsuyoshi Kondoh and Hideki Oginuma and Atsushi Kimura and Shinji Matsukawa and Tatsuhiko Aizawa",
year = "2003",
month = "5",
language = "English",
volume = "44",
pages = "981--985",
journal = "Materials Transactions",
issn = "1345-9678",
publisher = "Japan Institute of Metals (JIM)",
number = "5",

}

TY - JOUR

T1 - In-situ synthesis of Mg2Si intermetallics via powder metallurgy process

AU - Kondoh, Katsuyoshi

AU - Oginuma, Hideki

AU - Kimura, Atsushi

AU - Matsukawa, Shinji

AU - Aizawa, Tatsuhiko

PY - 2003/5

Y1 - 2003/5

N2 - The solid-state synthesis of Mg2Si intermetallic compounds has been evaluated in the present paper. The elemental magnesium and silicon powder mixture was employed as starting raw materials. In particular, the influence of the silicon particle by the repeated plastic working (RPW) on the in-situ formation of Mg2Si is discussed, based on the thermal and structural analysis results by DSC thermal analysis and XRD, respectively. Refined Si particles embedded uniformly in the magnesium matrix via RPW, can drive progressing Mg2Si synthesis at extremely low temperature; for example, the ignition temperature, Ts = 773 K, to commence the solid-state synthesis of raw powder mixture, was reduced to about 400-430 K. Further plastic working on the mixture causes in-situ formation of Mg2Si intermetallic compounds with a crystallite size of 30-80 nm. However, the ignition temperature to synthesize Mg2Si shifts to a higher temperature again. Regarding to the thermal stability of Mg2Si compounds, the particle size of in-situ synthesized Mg2Si compounds after annealing at 573 K for 900 s is about 30-100 nm, that is, the remarkable coarsening does not occur during annealing.

AB - The solid-state synthesis of Mg2Si intermetallic compounds has been evaluated in the present paper. The elemental magnesium and silicon powder mixture was employed as starting raw materials. In particular, the influence of the silicon particle by the repeated plastic working (RPW) on the in-situ formation of Mg2Si is discussed, based on the thermal and structural analysis results by DSC thermal analysis and XRD, respectively. Refined Si particles embedded uniformly in the magnesium matrix via RPW, can drive progressing Mg2Si synthesis at extremely low temperature; for example, the ignition temperature, Ts = 773 K, to commence the solid-state synthesis of raw powder mixture, was reduced to about 400-430 K. Further plastic working on the mixture causes in-situ formation of Mg2Si intermetallic compounds with a crystallite size of 30-80 nm. However, the ignition temperature to synthesize Mg2Si shifts to a higher temperature again. Regarding to the thermal stability of Mg2Si compounds, the particle size of in-situ synthesized Mg2Si compounds after annealing at 573 K for 900 s is about 30-100 nm, that is, the remarkable coarsening does not occur during annealing.

KW - Exothermic

KW - MgSi

KW - Nano-structure

KW - Repeated plastic working

KW - Solid-state synthesis

KW - Thermal stability

UR - http://www.scopus.com/inward/record.url?scp=0038458362&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0038458362&partnerID=8YFLogxK

M3 - Article

VL - 44

SP - 981

EP - 985

JO - Materials Transactions

JF - Materials Transactions

SN - 1345-9678

IS - 5

ER -