Investigation of the Flux Flow-inhibiting Effect of a Hole-opened Superconducting Bulk Magnet

K. Yokoyama, T. Tsukui, H. Mita, N. Tsubonoya, Tetsuo Oka

Research output: Contribution to journalConference article

Abstract

A hole-opened bulk material has been proposed to supply magnetic flux into the large-size and high-performance bulk efficiently because superconductivity is intentionally lowered in the portion with holes. We were anxious about the flux flow in a high applied field, while it was confirmed that the flux flow was suppressed in a high applied field at a low temperature. To examine the flux flow-inhibiting effect in detail, in this paper, the time response of flux density in four portions, between the holes, the inside of the inner holes, the side opposite the holes, and the center, was measured. Although small holes served as a channel and magnetic flux flew out through a channel just after applying a pulsed field, a channel closed for up to 0.2 seconds, flux flow was disturbed, and then the magnetic flux was trapped. As J c increased with a decrease in temperature, a channel closed more quickly, and a trapped field was enhanced.

Original languageEnglish
Pages (from-to)302-305
Number of pages4
JournalPhysics Procedia
Volume58
DOIs
Publication statusPublished - 2013 Jan 1
Externally publishedYes
Event26th International Symposium on Superconductivity, ISS 2013 - Tokyo, Japan
Duration: 2013 Nov 182013 Nov 20

Fingerprint

magnets
magnetic flux
time response
superconductivity
flux density
temperature

Keywords

  • flux flow
  • pulsed field magnetization
  • small hole
  • superconducting bulk magnet

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Cite this

Investigation of the Flux Flow-inhibiting Effect of a Hole-opened Superconducting Bulk Magnet. / Yokoyama, K.; Tsukui, T.; Mita, H.; Tsubonoya, N.; Oka, Tetsuo.

In: Physics Procedia, Vol. 58, 01.01.2013, p. 302-305.

Research output: Contribution to journalConference article

Yokoyama, K. ; Tsukui, T. ; Mita, H. ; Tsubonoya, N. ; Oka, Tetsuo. / Investigation of the Flux Flow-inhibiting Effect of a Hole-opened Superconducting Bulk Magnet. In: Physics Procedia. 2013 ; Vol. 58. pp. 302-305.
@article{15ac4e2131a64269bdca98ebfa057258,
title = "Investigation of the Flux Flow-inhibiting Effect of a Hole-opened Superconducting Bulk Magnet",
abstract = "A hole-opened bulk material has been proposed to supply magnetic flux into the large-size and high-performance bulk efficiently because superconductivity is intentionally lowered in the portion with holes. We were anxious about the flux flow in a high applied field, while it was confirmed that the flux flow was suppressed in a high applied field at a low temperature. To examine the flux flow-inhibiting effect in detail, in this paper, the time response of flux density in four portions, between the holes, the inside of the inner holes, the side opposite the holes, and the center, was measured. Although small holes served as a channel and magnetic flux flew out through a channel just after applying a pulsed field, a channel closed for up to 0.2 seconds, flux flow was disturbed, and then the magnetic flux was trapped. As J c increased with a decrease in temperature, a channel closed more quickly, and a trapped field was enhanced.",
keywords = "flux flow, pulsed field magnetization, small hole, superconducting bulk magnet",
author = "K. Yokoyama and T. Tsukui and H. Mita and N. Tsubonoya and Tetsuo Oka",
year = "2013",
month = "1",
day = "1",
doi = "10.1016/j.phpro.2014.09.075",
language = "English",
volume = "58",
pages = "302--305",
journal = "Physics Procedia",
issn = "1875-3884",
publisher = "Elsevier BV",

}

TY - JOUR

T1 - Investigation of the Flux Flow-inhibiting Effect of a Hole-opened Superconducting Bulk Magnet

AU - Yokoyama, K.

AU - Tsukui, T.

AU - Mita, H.

AU - Tsubonoya, N.

AU - Oka, Tetsuo

PY - 2013/1/1

Y1 - 2013/1/1

N2 - A hole-opened bulk material has been proposed to supply magnetic flux into the large-size and high-performance bulk efficiently because superconductivity is intentionally lowered in the portion with holes. We were anxious about the flux flow in a high applied field, while it was confirmed that the flux flow was suppressed in a high applied field at a low temperature. To examine the flux flow-inhibiting effect in detail, in this paper, the time response of flux density in four portions, between the holes, the inside of the inner holes, the side opposite the holes, and the center, was measured. Although small holes served as a channel and magnetic flux flew out through a channel just after applying a pulsed field, a channel closed for up to 0.2 seconds, flux flow was disturbed, and then the magnetic flux was trapped. As J c increased with a decrease in temperature, a channel closed more quickly, and a trapped field was enhanced.

AB - A hole-opened bulk material has been proposed to supply magnetic flux into the large-size and high-performance bulk efficiently because superconductivity is intentionally lowered in the portion with holes. We were anxious about the flux flow in a high applied field, while it was confirmed that the flux flow was suppressed in a high applied field at a low temperature. To examine the flux flow-inhibiting effect in detail, in this paper, the time response of flux density in four portions, between the holes, the inside of the inner holes, the side opposite the holes, and the center, was measured. Although small holes served as a channel and magnetic flux flew out through a channel just after applying a pulsed field, a channel closed for up to 0.2 seconds, flux flow was disturbed, and then the magnetic flux was trapped. As J c increased with a decrease in temperature, a channel closed more quickly, and a trapped field was enhanced.

KW - flux flow

KW - pulsed field magnetization

KW - small hole

KW - superconducting bulk magnet

UR - http://www.scopus.com/inward/record.url?scp=85061908152&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85061908152&partnerID=8YFLogxK

U2 - 10.1016/j.phpro.2014.09.075

DO - 10.1016/j.phpro.2014.09.075

M3 - Conference article

AN - SCOPUS:85061908152

VL - 58

SP - 302

EP - 305

JO - Physics Procedia

JF - Physics Procedia

SN - 1875-3884

ER -