Laser beam scanning system for irradiation in an external quadrangular form for soldering of quad flat package IC

Hitoshi Tsuchiya, Tetsuya Homma

Research output: Contribution to journalArticle

Abstract

We propose a new soldering process and a system for a quad flat package IC (QFP-IC). The incident line-formed laser beam converted by this system can realize an external quadrangular form line for the non-contact regional heating, to provide thin and light weight electronic packages as required. The laser beam pumped by an yttrium aluminum garnet (YAG) laser oscillator is split into four beams. Using a galvano motor, which can scan the reflection mirror with high frequencies, the laser beam can change the heating line. The soldering time for QFP-IC of 100 pins with the 0.65 mm pitch was 6 s. As the regional heating just only junctions, the temperature in the resin package was lower than 141 °C after solder fusion. From the experimental result, it is confirmed that this method is less damage to a resin package than a conventional whole heating method.

Original languageEnglish
JournalOptical Review
Volume22
Issue number1
DOIs
Publication statusPublished - 2015 Feb 1

Fingerprint

soldering
laser beams
irradiation
scanning
heating
resins
solders
yttrium-aluminum garnet
fusion
oscillators
mirrors
damage
electronics
lasers

Keywords

  • Galvano motor
  • Laser beam scanning
  • Laser soldering
  • Quad flat package (QFP)
  • Yttrium aluminum garnet (YAG) laser

ASJC Scopus subject areas

  • Atomic and Molecular Physics, and Optics

Cite this

Laser beam scanning system for irradiation in an external quadrangular form for soldering of quad flat package IC. / Tsuchiya, Hitoshi; Homma, Tetsuya.

In: Optical Review, Vol. 22, No. 1, 01.02.2015.

Research output: Contribution to journalArticle

@article{aa66e39d7bff4956a19b4ce640b4cec6,
title = "Laser beam scanning system for irradiation in an external quadrangular form for soldering of quad flat package IC",
abstract = "We propose a new soldering process and a system for a quad flat package IC (QFP-IC). The incident line-formed laser beam converted by this system can realize an external quadrangular form line for the non-contact regional heating, to provide thin and light weight electronic packages as required. The laser beam pumped by an yttrium aluminum garnet (YAG) laser oscillator is split into four beams. Using a galvano motor, which can scan the reflection mirror with high frequencies, the laser beam can change the heating line. The soldering time for QFP-IC of 100 pins with the 0.65 mm pitch was 6 s. As the regional heating just only junctions, the temperature in the resin package was lower than 141 °C after solder fusion. From the experimental result, it is confirmed that this method is less damage to a resin package than a conventional whole heating method.",
keywords = "Galvano motor, Laser beam scanning, Laser soldering, Quad flat package (QFP), Yttrium aluminum garnet (YAG) laser",
author = "Hitoshi Tsuchiya and Tetsuya Homma",
year = "2015",
month = "2",
day = "1",
doi = "10.1007/s10043-015-0032-6",
language = "English",
volume = "22",
journal = "Optical Review",
issn = "1340-6000",
publisher = "Springer-Verlag GmbH and Co. KG",
number = "1",

}

TY - JOUR

T1 - Laser beam scanning system for irradiation in an external quadrangular form for soldering of quad flat package IC

AU - Tsuchiya, Hitoshi

AU - Homma, Tetsuya

PY - 2015/2/1

Y1 - 2015/2/1

N2 - We propose a new soldering process and a system for a quad flat package IC (QFP-IC). The incident line-formed laser beam converted by this system can realize an external quadrangular form line for the non-contact regional heating, to provide thin and light weight electronic packages as required. The laser beam pumped by an yttrium aluminum garnet (YAG) laser oscillator is split into four beams. Using a galvano motor, which can scan the reflection mirror with high frequencies, the laser beam can change the heating line. The soldering time for QFP-IC of 100 pins with the 0.65 mm pitch was 6 s. As the regional heating just only junctions, the temperature in the resin package was lower than 141 °C after solder fusion. From the experimental result, it is confirmed that this method is less damage to a resin package than a conventional whole heating method.

AB - We propose a new soldering process and a system for a quad flat package IC (QFP-IC). The incident line-formed laser beam converted by this system can realize an external quadrangular form line for the non-contact regional heating, to provide thin and light weight electronic packages as required. The laser beam pumped by an yttrium aluminum garnet (YAG) laser oscillator is split into four beams. Using a galvano motor, which can scan the reflection mirror with high frequencies, the laser beam can change the heating line. The soldering time for QFP-IC of 100 pins with the 0.65 mm pitch was 6 s. As the regional heating just only junctions, the temperature in the resin package was lower than 141 °C after solder fusion. From the experimental result, it is confirmed that this method is less damage to a resin package than a conventional whole heating method.

KW - Galvano motor

KW - Laser beam scanning

KW - Laser soldering

KW - Quad flat package (QFP)

KW - Yttrium aluminum garnet (YAG) laser

UR - http://www.scopus.com/inward/record.url?scp=84939984783&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84939984783&partnerID=8YFLogxK

U2 - 10.1007/s10043-015-0032-6

DO - 10.1007/s10043-015-0032-6

M3 - Article

VL - 22

JO - Optical Review

JF - Optical Review

SN - 1340-6000

IS - 1

ER -