Length dependence of baseband bandwidth for spliced graded‐index multimode fibers

Tadatoshi Tanifuji, Tsuneo Horiguchi, Masamitsu Tokuda

Research output: Contribution to journalArticle

Abstract

It is important in determining system configuration to understand the length dependence of the baseband bandwidth of a graded‐index fiber. An actual fiber communication system is constructed from a number of connected fibers with different characteristics. In such cases, the length dependence of the baseband bandwidth becomes very complex due to mode conversion and mode dispersion compensation at the junction and no practical method exists to estimate the characteristics. Therefore, actual systems are approximated by setting an appropriate value of γ in the γth power expression. This paper first finds the length dependence (γ value) of the baseband bandwidth measured in a number of fiber systems actually installed. Next, to analyze factors determining the length dependence, experimental and theoretical investigations are conducted. It is found that an important factor determining junction characteristics is the mode dispersion compensation regulated by the group delay difference among principal mode groups as well as within a principal mode group. It is also found that mode conversion at the junction has a negligible effect. In an actual communication channel employing many fibers, correlation in the group delay difference among the principal mode groups and within the principal mode group of each fiber becomes small and the value of γ is restricted. In practice, it is possible to estimate the average baseband bandwidth by setting γ ∼ 0.6.

Original languageEnglish
Pages (from-to)39-48
Number of pages10
JournalElectronics and Communications in Japan, Part I: Communications (English translation of Denshi Tsushin Gakkai Ronbunshi)
Volume65
Issue number10
DOIs
Publication statusPublished - 1982
Externally publishedYes

Fingerprint

Multimode fibers
Bandwidth
Fibers
Dispersion compensation
Group delay
Communication systems

ASJC Scopus subject areas

  • Computer Networks and Communications
  • Electrical and Electronic Engineering

Cite this

Length dependence of baseband bandwidth for spliced graded‐index multimode fibers. / Tanifuji, Tadatoshi; Horiguchi, Tsuneo; Tokuda, Masamitsu.

In: Electronics and Communications in Japan, Part I: Communications (English translation of Denshi Tsushin Gakkai Ronbunshi), Vol. 65, No. 10, 1982, p. 39-48.

Research output: Contribution to journalArticle

@article{8fcefad9d6a64346a55e2792f038ab90,
title = "Length dependence of baseband bandwidth for spliced graded‐index multimode fibers",
abstract = "It is important in determining system configuration to understand the length dependence of the baseband bandwidth of a graded‐index fiber. An actual fiber communication system is constructed from a number of connected fibers with different characteristics. In such cases, the length dependence of the baseband bandwidth becomes very complex due to mode conversion and mode dispersion compensation at the junction and no practical method exists to estimate the characteristics. Therefore, actual systems are approximated by setting an appropriate value of γ in the γth power expression. This paper first finds the length dependence (γ value) of the baseband bandwidth measured in a number of fiber systems actually installed. Next, to analyze factors determining the length dependence, experimental and theoretical investigations are conducted. It is found that an important factor determining junction characteristics is the mode dispersion compensation regulated by the group delay difference among principal mode groups as well as within a principal mode group. It is also found that mode conversion at the junction has a negligible effect. In an actual communication channel employing many fibers, correlation in the group delay difference among the principal mode groups and within the principal mode group of each fiber becomes small and the value of γ is restricted. In practice, it is possible to estimate the average baseband bandwidth by setting γ ∼ 0.6.",
author = "Tadatoshi Tanifuji and Tsuneo Horiguchi and Masamitsu Tokuda",
year = "1982",
doi = "10.1002/ecja.4400651006",
language = "English",
volume = "65",
pages = "39--48",
journal = "Electronics and Communications in Japan, Part I: Communications (English translation of Denshi Tsushin Gakkai Ronbunshi)",
issn = "8756-6621",
publisher = "John Wiley and Sons Inc.",
number = "10",

}

TY - JOUR

T1 - Length dependence of baseband bandwidth for spliced graded‐index multimode fibers

AU - Tanifuji, Tadatoshi

AU - Horiguchi, Tsuneo

AU - Tokuda, Masamitsu

PY - 1982

Y1 - 1982

N2 - It is important in determining system configuration to understand the length dependence of the baseband bandwidth of a graded‐index fiber. An actual fiber communication system is constructed from a number of connected fibers with different characteristics. In such cases, the length dependence of the baseband bandwidth becomes very complex due to mode conversion and mode dispersion compensation at the junction and no practical method exists to estimate the characteristics. Therefore, actual systems are approximated by setting an appropriate value of γ in the γth power expression. This paper first finds the length dependence (γ value) of the baseband bandwidth measured in a number of fiber systems actually installed. Next, to analyze factors determining the length dependence, experimental and theoretical investigations are conducted. It is found that an important factor determining junction characteristics is the mode dispersion compensation regulated by the group delay difference among principal mode groups as well as within a principal mode group. It is also found that mode conversion at the junction has a negligible effect. In an actual communication channel employing many fibers, correlation in the group delay difference among the principal mode groups and within the principal mode group of each fiber becomes small and the value of γ is restricted. In practice, it is possible to estimate the average baseband bandwidth by setting γ ∼ 0.6.

AB - It is important in determining system configuration to understand the length dependence of the baseband bandwidth of a graded‐index fiber. An actual fiber communication system is constructed from a number of connected fibers with different characteristics. In such cases, the length dependence of the baseband bandwidth becomes very complex due to mode conversion and mode dispersion compensation at the junction and no practical method exists to estimate the characteristics. Therefore, actual systems are approximated by setting an appropriate value of γ in the γth power expression. This paper first finds the length dependence (γ value) of the baseband bandwidth measured in a number of fiber systems actually installed. Next, to analyze factors determining the length dependence, experimental and theoretical investigations are conducted. It is found that an important factor determining junction characteristics is the mode dispersion compensation regulated by the group delay difference among principal mode groups as well as within a principal mode group. It is also found that mode conversion at the junction has a negligible effect. In an actual communication channel employing many fibers, correlation in the group delay difference among the principal mode groups and within the principal mode group of each fiber becomes small and the value of γ is restricted. In practice, it is possible to estimate the average baseband bandwidth by setting γ ∼ 0.6.

UR - http://www.scopus.com/inward/record.url?scp=0020190352&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0020190352&partnerID=8YFLogxK

U2 - 10.1002/ecja.4400651006

DO - 10.1002/ecja.4400651006

M3 - Article

VL - 65

SP - 39

EP - 48

JO - Electronics and Communications in Japan, Part I: Communications (English translation of Denshi Tsushin Gakkai Ronbunshi)

JF - Electronics and Communications in Japan, Part I: Communications (English translation of Denshi Tsushin Gakkai Ronbunshi)

SN - 8756-6621

IS - 10

ER -