Linear vernier machine with permanent magnets only on armature side

Shoji Shimomura, Masahiro Takano

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Abstract

The conventional linear PM machines can be classified into the type which has armature on mover or the type which has it on stator. In either type it requires to lay the armature windings or the permanent magnets over a long distance in the application for long distance movement. It leads to high cost. Therefore, we proposed a linear vernier machine with the magnets only on armature side. This paper describes the theoretical proof and introduces comparisons of computed and experimental results. The comparisons agreed well. The prototype machine for the experiment had a problem due to less accuracy in assembly but we think it is not difficult to solve the problem.

Original languageEnglish
Title of host publicationApplied Mechanics and Materials
Pages233-240
Number of pages8
Volume416-417
DOIs
Publication statusPublished - 2013
Event9th International Symposium on Linear Drives for Industry Applications, LDIA 2013 - Hangzhou
Duration: 2013 Jul 72013 Jul 10

Publication series

NameApplied Mechanics and Materials
Volume416-417
ISSN (Print)16609336
ISSN (Electronic)16627482

Other

Other9th International Symposium on Linear Drives for Industry Applications, LDIA 2013
CityHangzhou
Period13/7/713/7/10

    Fingerprint

Keywords

  • Linear machine
  • Low-cost linear drive system
  • Permanent magnet
  • Vernier machine

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Shimomura, S., & Takano, M. (2013). Linear vernier machine with permanent magnets only on armature side. In Applied Mechanics and Materials (Vol. 416-417, pp. 233-240). (Applied Mechanics and Materials; Vol. 416-417). https://doi.org/10.4028/www.scientific.net/AMM.416-417.233