This paper aims for high reliability as well as reduction of hardware size, cost and development period for the time‐division multiplex access (TDMA) equipment, and proposes a new TDMA equipment architecture and modular construction. The fundamental approach employed in this paper is the digital realization of the analog circuit and the LSI implementation of the digital circuit. Then to realize TDMA equipment with a simple architecture and to realize a widely applicable LSI, TDMA equipment is reconstructed into a hardware‐oriented architecture. Based on the new architecture and the optimal function assignment to the modules, the following LSI and IC were developed. Six types for synchronization control, 11 types of LSI and IC for modulation‐demodulation (3 LSI, 4 MIC and 4 HIC), and 1 type of terrestrial network interface. By this development of LSI and IC, the hardware scale of TDMA equipment was reduced to one‐fifth, and the development period is reduced to one‐half compared with previous equipment. The maintenance‐free property is also achieved. The developed LSI and IC can be applied to various TDMA equipment in general with different TDMA frame and rate. For TDMA equipment to be developed in the future, the hardware‐scale and the development period can be reduced as in this case.
|Number of pages||14|
|Journal||Electronics and Communications in Japan (Part III: Fundamental Electronic Science)|
|Publication status||Published - 1990|
ASJC Scopus subject areas
- Electrical and Electronic Engineering