Manufacturing of ferrite-base abrasives for magnetic-electrolytic polishing and its finishing characteristics

Masahiro Anzai, Hisanori Otaki, Yoshinori Ayabe, Seizo Takahashi, Etsuya Kawashima, Takeo Nakagawa

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

This study aims at developing the new abrasive for electrolytic-magnetic finishing and investigating the grindability of this abrasive. The ferrite-Al2O3 abrasive which was made by sintering has high grindability in comparison with sintered ferrite abrasives or soft ferrite raw powders. Ferrite-base abrasives will become a very useful in the electrolytic-magnetic abrasive finishing.

Original languageEnglish
Pages (from-to)833-836
Number of pages4
JournalFuntai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy
Volume40
Issue number8
Publication statusPublished - 1993 Aug
Externally publishedYes

Fingerprint

Electrolytic polishing
Abrasives
Ferrite
Powders
Sintering

ASJC Scopus subject areas

  • Mechanical Engineering
  • Metals and Alloys

Cite this

Manufacturing of ferrite-base abrasives for magnetic-electrolytic polishing and its finishing characteristics. / Anzai, Masahiro; Otaki, Hisanori; Ayabe, Yoshinori; Takahashi, Seizo; Kawashima, Etsuya; Nakagawa, Takeo.

In: Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, Vol. 40, No. 8, 08.1993, p. 833-836.

Research output: Contribution to journalArticle

@article{d042d75a25f94608968814c764b42b56,
title = "Manufacturing of ferrite-base abrasives for magnetic-electrolytic polishing and its finishing characteristics",
abstract = "This study aims at developing the new abrasive for electrolytic-magnetic finishing and investigating the grindability of this abrasive. The ferrite-Al2O3 abrasive which was made by sintering has high grindability in comparison with sintered ferrite abrasives or soft ferrite raw powders. Ferrite-base abrasives will become a very useful in the electrolytic-magnetic abrasive finishing.",
author = "Masahiro Anzai and Hisanori Otaki and Yoshinori Ayabe and Seizo Takahashi and Etsuya Kawashima and Takeo Nakagawa",
year = "1993",
month = "8",
language = "English",
volume = "40",
pages = "833--836",
journal = "Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy",
issn = "0532-8799",
publisher = "Funtai Funamtsu Yakin Kyokai/Japan Soc. of Powder Metallurgy",
number = "8",

}

TY - JOUR

T1 - Manufacturing of ferrite-base abrasives for magnetic-electrolytic polishing and its finishing characteristics

AU - Anzai, Masahiro

AU - Otaki, Hisanori

AU - Ayabe, Yoshinori

AU - Takahashi, Seizo

AU - Kawashima, Etsuya

AU - Nakagawa, Takeo

PY - 1993/8

Y1 - 1993/8

N2 - This study aims at developing the new abrasive for electrolytic-magnetic finishing and investigating the grindability of this abrasive. The ferrite-Al2O3 abrasive which was made by sintering has high grindability in comparison with sintered ferrite abrasives or soft ferrite raw powders. Ferrite-base abrasives will become a very useful in the electrolytic-magnetic abrasive finishing.

AB - This study aims at developing the new abrasive for electrolytic-magnetic finishing and investigating the grindability of this abrasive. The ferrite-Al2O3 abrasive which was made by sintering has high grindability in comparison with sintered ferrite abrasives or soft ferrite raw powders. Ferrite-base abrasives will become a very useful in the electrolytic-magnetic abrasive finishing.

UR - http://www.scopus.com/inward/record.url?scp=0027649723&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0027649723&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:0027649723

VL - 40

SP - 833

EP - 836

JO - Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy

JF - Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy

SN - 0532-8799

IS - 8

ER -