Microscale materials design using focused proton-beam writing

Masaki Yamaguchi, Kazuki Watanabe, Yoichiro Masuda

Research output: Chapter in Book/Report/Conference proceedingChapter

Abstract

In this study, we fabricated bismuth titanate (Bi4Ti3O12, BIT) thick films by the polyvinylpyrrolidone (PVP) molecules-enhanced metal-organic decomposition (MOD) method, and we discussed directly the micropatterning technique by the focused proton-beam irradiation method. The fabricated 1μm thick films exhibit a highly c-axis orientation, have a mirror-smooth surface, have a reduced crack density, and show ferroelectric properties. However, when the amount of PVP added was excessive, the density of the BIT thick film decreased. In the case of no PVP, the remanent polarization and coercive field value was 5.36μC/cm2 and 168kV/cm, respectively, at an applied electric field of 400kV/cm. We confirmed the possibility of microfabrication of BIT thick films by proton-beam irradiation. The main irradiation conditions were an accelerated voltage of 1MeV, a focused-beam diameter of 1.3μm, and a beam current of 20pA, respectively. We fabricated smooth surface micropillars with a diameter of 5μm. From these results, we believe that the focused proton-beam irradiation is effective in realizing the BIT thick film with fine, arbitrary-shaped micropatterns.

Original languageEnglish
Title of host publicationNanoscale Ferroelectric-Multiferroic Materials for Energy Harvesting Applications
PublisherElsevier
Pages81-93
Number of pages13
ISBN (Electronic)9780128145005
ISBN (Print)9780128144992
DOIs
Publication statusPublished - 2019 Feb 25

Keywords

  • Bismuth titanate
  • Metal-organic decomposition
  • Micropatterning
  • Polyvinylpyrrolidone
  • Proton beam

ASJC Scopus subject areas

  • Engineering(all)
  • Materials Science(all)

Fingerprint Dive into the research topics of 'Microscale materials design using focused proton-beam writing'. Together they form a unique fingerprint.

  • Cite this

    Yamaguchi, M., Watanabe, K., & Masuda, Y. (2019). Microscale materials design using focused proton-beam writing. In Nanoscale Ferroelectric-Multiferroic Materials for Energy Harvesting Applications (pp. 81-93). Elsevier. https://doi.org/10.1016/B978-0-12-814499-2.00005-0