Modification and thermal properties of syndiotactic-1,2-polybutadiene

Naofumi Naga, Shigenori Ishinoda, Hiroki Ishiguro, Gaku Ishikawa, Keiichi Noguchi

Research output: Contribution to journalArticle

Abstract

Side chain of syndiotactic-1,2-polybutadiene (SPBU) has been modified by means of hydrogenation, hydrosilylation with trialkylsilane compounds, or thiol–ene reaction with alkyl thiol compounds. Crystallization temperature (Tc) of the resulting polymers, which was detected on the cooling process from melting state, decreased with increasing the modification ratio. The molecular bulkiness of the compounds affected the degree of the Tc depression with increasing the modification ratio. The modification of SPBU with triphenyl silane increased glass transition temperature of the polymers. Isothermally crystallized SPBU samples modified by butane thiol (BT) showed two melting peaks derived from first crystallization (Tm1, higher temperature) and second crystallization (Tm2, lower temperature). The Tm1 decreased with increasing the modification ratio, whereas the Tm2 was almost independent of the modification ratio. The equilibrium melting temperatures of the Tm1s of the SPBU samples modified by BT were decreased with increasing the modification ratio. By contrast, the modification ratio did not affect the equilibrium melting temperatures of the Tm2s. Slopes in Hoffman–Week’s plot the modified SPBU samples indicated that Tm1 and Tm2 were originated from lamellar crystal and fringed micelle, respectively.

Original languageEnglish
Pages (from-to)1-17
Number of pages17
JournalPolymer Bulletin
DOIs
Publication statusAccepted/In press - 2018 May 26

Fingerprint

polybutadiene
Polybutadienes
Thermodynamic properties
thermodynamic properties
Crystallization
Sulfhydryl Compounds
Butane
thiols
melting
Melting point
Polymers
Melting
crystallization
butanes
Hydrosilylation
Silanes
Micelles
Temperature
Hydrogenation
polymers

Keywords

  • Crystallization
  • Melting
  • Modification
  • Side chain
  • Syndiotactic-1,2-polybutadiene

ASJC Scopus subject areas

  • Chemistry(all)
  • Condensed Matter Physics
  • Polymers and Plastics
  • Materials Chemistry

Cite this

Modification and thermal properties of syndiotactic-1,2-polybutadiene. / Naga, Naofumi; Ishinoda, Shigenori; Ishiguro, Hiroki; Ishikawa, Gaku; Noguchi, Keiichi.

In: Polymer Bulletin, 26.05.2018, p. 1-17.

Research output: Contribution to journalArticle

Naga, Naofumi ; Ishinoda, Shigenori ; Ishiguro, Hiroki ; Ishikawa, Gaku ; Noguchi, Keiichi. / Modification and thermal properties of syndiotactic-1,2-polybutadiene. In: Polymer Bulletin. 2018 ; pp. 1-17.
@article{464c42d1122e477ca4f5ec736c4da376,
title = "Modification and thermal properties of syndiotactic-1,2-polybutadiene",
abstract = "Side chain of syndiotactic-1,2-polybutadiene (SPBU) has been modified by means of hydrogenation, hydrosilylation with trialkylsilane compounds, or thiol–ene reaction with alkyl thiol compounds. Crystallization temperature (Tc) of the resulting polymers, which was detected on the cooling process from melting state, decreased with increasing the modification ratio. The molecular bulkiness of the compounds affected the degree of the Tc depression with increasing the modification ratio. The modification of SPBU with triphenyl silane increased glass transition temperature of the polymers. Isothermally crystallized SPBU samples modified by butane thiol (BT) showed two melting peaks derived from first crystallization (Tm1, higher temperature) and second crystallization (Tm2, lower temperature). The Tm1 decreased with increasing the modification ratio, whereas the Tm2 was almost independent of the modification ratio. The equilibrium melting temperatures of the Tm1s of the SPBU samples modified by BT were decreased with increasing the modification ratio. By contrast, the modification ratio did not affect the equilibrium melting temperatures of the Tm2s. Slopes in Hoffman–Week’s plot the modified SPBU samples indicated that Tm1 and Tm2 were originated from lamellar crystal and fringed micelle, respectively.",
keywords = "Crystallization, Melting, Modification, Side chain, Syndiotactic-1,2-polybutadiene",
author = "Naofumi Naga and Shigenori Ishinoda and Hiroki Ishiguro and Gaku Ishikawa and Keiichi Noguchi",
year = "2018",
month = "5",
day = "26",
doi = "10.1007/s00289-018-2380-4",
language = "English",
pages = "1--17",
journal = "Polymer Bulletin",
issn = "0170-0839",
publisher = "Springer Verlag",

}

TY - JOUR

T1 - Modification and thermal properties of syndiotactic-1,2-polybutadiene

AU - Naga, Naofumi

AU - Ishinoda, Shigenori

AU - Ishiguro, Hiroki

AU - Ishikawa, Gaku

AU - Noguchi, Keiichi

PY - 2018/5/26

Y1 - 2018/5/26

N2 - Side chain of syndiotactic-1,2-polybutadiene (SPBU) has been modified by means of hydrogenation, hydrosilylation with trialkylsilane compounds, or thiol–ene reaction with alkyl thiol compounds. Crystallization temperature (Tc) of the resulting polymers, which was detected on the cooling process from melting state, decreased with increasing the modification ratio. The molecular bulkiness of the compounds affected the degree of the Tc depression with increasing the modification ratio. The modification of SPBU with triphenyl silane increased glass transition temperature of the polymers. Isothermally crystallized SPBU samples modified by butane thiol (BT) showed two melting peaks derived from first crystallization (Tm1, higher temperature) and second crystallization (Tm2, lower temperature). The Tm1 decreased with increasing the modification ratio, whereas the Tm2 was almost independent of the modification ratio. The equilibrium melting temperatures of the Tm1s of the SPBU samples modified by BT were decreased with increasing the modification ratio. By contrast, the modification ratio did not affect the equilibrium melting temperatures of the Tm2s. Slopes in Hoffman–Week’s plot the modified SPBU samples indicated that Tm1 and Tm2 were originated from lamellar crystal and fringed micelle, respectively.

AB - Side chain of syndiotactic-1,2-polybutadiene (SPBU) has been modified by means of hydrogenation, hydrosilylation with trialkylsilane compounds, or thiol–ene reaction with alkyl thiol compounds. Crystallization temperature (Tc) of the resulting polymers, which was detected on the cooling process from melting state, decreased with increasing the modification ratio. The molecular bulkiness of the compounds affected the degree of the Tc depression with increasing the modification ratio. The modification of SPBU with triphenyl silane increased glass transition temperature of the polymers. Isothermally crystallized SPBU samples modified by butane thiol (BT) showed two melting peaks derived from first crystallization (Tm1, higher temperature) and second crystallization (Tm2, lower temperature). The Tm1 decreased with increasing the modification ratio, whereas the Tm2 was almost independent of the modification ratio. The equilibrium melting temperatures of the Tm1s of the SPBU samples modified by BT were decreased with increasing the modification ratio. By contrast, the modification ratio did not affect the equilibrium melting temperatures of the Tm2s. Slopes in Hoffman–Week’s plot the modified SPBU samples indicated that Tm1 and Tm2 were originated from lamellar crystal and fringed micelle, respectively.

KW - Crystallization

KW - Melting

KW - Modification

KW - Side chain

KW - Syndiotactic-1,2-polybutadiene

UR - http://www.scopus.com/inward/record.url?scp=85047412236&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85047412236&partnerID=8YFLogxK

U2 - 10.1007/s00289-018-2380-4

DO - 10.1007/s00289-018-2380-4

M3 - Article

AN - SCOPUS:85047412236

SP - 1

EP - 17

JO - Polymer Bulletin

JF - Polymer Bulletin

SN - 0170-0839

ER -