Network power saving by group control method with sensing data characteristic

A. Arai, Y. Takeda, M. Nakamura, Masahiro Inoue

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

As Wireless Sensor Network (WSN) has been widely accepted, the network is expected to be applied to environmental measure in yards and gardens. Because stable electric power supply is not available in environmental measure, WSN is generally powered by battery. Improving energy efficiency is important in order to extend operation time of WSN. On the other hand, in actual environmental measure, values of sensors do not vary significantly, and neighbor sensors indicate similar values in stable condition. This research proposes Group Control Method as a new power-saving technique. This Method utilizes the similarity of the values among neighbor sensors and time-stable sensor value in environmental measure. The method forms sensor groups and adjusts sleep time of the network nodes to reduce power consumption. In our previous study, a problem remained; when values of sensor have the same tendency as other values of sensors, the nodes are not grouped together. This paper solves the problem with derivatives of sensor values. This paper shows effectiveness of power consumption and sensing accuracy based on simulation evaluation.

Original languageEnglish
Title of host publication1st IEEE Global Conference on Consumer Electronics 2012, GCCE 2012
Pages612-613
Number of pages2
DOIs
Publication statusPublished - 2012
Event1st IEEE Global Conference on Consumer Electronics, GCCE 2012 - Tokyo
Duration: 2012 Oct 22012 Oct 5

Other

Other1st IEEE Global Conference on Consumer Electronics, GCCE 2012
CityTokyo
Period12/10/212/10/5

Fingerprint

Sensors
Wireless sensor networks
Electric power utilization
Energy efficiency
Derivatives

Keywords

  • power-saving
  • Wireless Sensor Network

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Cite this

Arai, A., Takeda, Y., Nakamura, M., & Inoue, M. (2012). Network power saving by group control method with sensing data characteristic. In 1st IEEE Global Conference on Consumer Electronics 2012, GCCE 2012 (pp. 612-613). [6379930] https://doi.org/10.1109/GCCE.2012.6379930

Network power saving by group control method with sensing data characteristic. / Arai, A.; Takeda, Y.; Nakamura, M.; Inoue, Masahiro.

1st IEEE Global Conference on Consumer Electronics 2012, GCCE 2012. 2012. p. 612-613 6379930.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Arai, A, Takeda, Y, Nakamura, M & Inoue, M 2012, Network power saving by group control method with sensing data characteristic. in 1st IEEE Global Conference on Consumer Electronics 2012, GCCE 2012., 6379930, pp. 612-613, 1st IEEE Global Conference on Consumer Electronics, GCCE 2012, Tokyo, 12/10/2. https://doi.org/10.1109/GCCE.2012.6379930
Arai A, Takeda Y, Nakamura M, Inoue M. Network power saving by group control method with sensing data characteristic. In 1st IEEE Global Conference on Consumer Electronics 2012, GCCE 2012. 2012. p. 612-613. 6379930 https://doi.org/10.1109/GCCE.2012.6379930
Arai, A. ; Takeda, Y. ; Nakamura, M. ; Inoue, Masahiro. / Network power saving by group control method with sensing data characteristic. 1st IEEE Global Conference on Consumer Electronics 2012, GCCE 2012. 2012. pp. 612-613
@inproceedings{86908876bd334f90b9e6a9f56662ffea,
title = "Network power saving by group control method with sensing data characteristic",
abstract = "As Wireless Sensor Network (WSN) has been widely accepted, the network is expected to be applied to environmental measure in yards and gardens. Because stable electric power supply is not available in environmental measure, WSN is generally powered by battery. Improving energy efficiency is important in order to extend operation time of WSN. On the other hand, in actual environmental measure, values of sensors do not vary significantly, and neighbor sensors indicate similar values in stable condition. This research proposes Group Control Method as a new power-saving technique. This Method utilizes the similarity of the values among neighbor sensors and time-stable sensor value in environmental measure. The method forms sensor groups and adjusts sleep time of the network nodes to reduce power consumption. In our previous study, a problem remained; when values of sensor have the same tendency as other values of sensors, the nodes are not grouped together. This paper solves the problem with derivatives of sensor values. This paper shows effectiveness of power consumption and sensing accuracy based on simulation evaluation.",
keywords = "power-saving, Wireless Sensor Network",
author = "A. Arai and Y. Takeda and M. Nakamura and Masahiro Inoue",
year = "2012",
doi = "10.1109/GCCE.2012.6379930",
language = "English",
isbn = "9781467315005",
pages = "612--613",
booktitle = "1st IEEE Global Conference on Consumer Electronics 2012, GCCE 2012",

}

TY - GEN

T1 - Network power saving by group control method with sensing data characteristic

AU - Arai, A.

AU - Takeda, Y.

AU - Nakamura, M.

AU - Inoue, Masahiro

PY - 2012

Y1 - 2012

N2 - As Wireless Sensor Network (WSN) has been widely accepted, the network is expected to be applied to environmental measure in yards and gardens. Because stable electric power supply is not available in environmental measure, WSN is generally powered by battery. Improving energy efficiency is important in order to extend operation time of WSN. On the other hand, in actual environmental measure, values of sensors do not vary significantly, and neighbor sensors indicate similar values in stable condition. This research proposes Group Control Method as a new power-saving technique. This Method utilizes the similarity of the values among neighbor sensors and time-stable sensor value in environmental measure. The method forms sensor groups and adjusts sleep time of the network nodes to reduce power consumption. In our previous study, a problem remained; when values of sensor have the same tendency as other values of sensors, the nodes are not grouped together. This paper solves the problem with derivatives of sensor values. This paper shows effectiveness of power consumption and sensing accuracy based on simulation evaluation.

AB - As Wireless Sensor Network (WSN) has been widely accepted, the network is expected to be applied to environmental measure in yards and gardens. Because stable electric power supply is not available in environmental measure, WSN is generally powered by battery. Improving energy efficiency is important in order to extend operation time of WSN. On the other hand, in actual environmental measure, values of sensors do not vary significantly, and neighbor sensors indicate similar values in stable condition. This research proposes Group Control Method as a new power-saving technique. This Method utilizes the similarity of the values among neighbor sensors and time-stable sensor value in environmental measure. The method forms sensor groups and adjusts sleep time of the network nodes to reduce power consumption. In our previous study, a problem remained; when values of sensor have the same tendency as other values of sensors, the nodes are not grouped together. This paper solves the problem with derivatives of sensor values. This paper shows effectiveness of power consumption and sensing accuracy based on simulation evaluation.

KW - power-saving

KW - Wireless Sensor Network

UR - http://www.scopus.com/inward/record.url?scp=84872356115&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84872356115&partnerID=8YFLogxK

U2 - 10.1109/GCCE.2012.6379930

DO - 10.1109/GCCE.2012.6379930

M3 - Conference contribution

AN - SCOPUS:84872356115

SN - 9781467315005

SP - 612

EP - 613

BT - 1st IEEE Global Conference on Consumer Electronics 2012, GCCE 2012

ER -