NOTCH TOUGHNESS AND RETAINED AUSTENITE IN 9% NI STEEL WELDS USING FERRITIC FILLER METALS.

Hiroshi Tamura, Tadao Onzawa, Susumu Uematsu, Kiyoaki Maekawa

Research output: Contribution to journal › Article

2 Citations (Scopus)

Abstract

A recently developed ferritic filler metal of chemical compositions similar to the base metal was used in welding test specimens. Two welds of single- and multi-pass were made to investigate the effect of multiple thermal cycles on retained austenite and toughness. The influence of the austenite on toughness is discussed in detail.

Original languageEnglish
Pages (from-to)25-30
Number of pages6
JournalTransactions of the Japan Welding Society
Volume12
Issue number1
Publication statusPublished - 1981 Jan 1
Externally publishedYes

Fingerprint

Filler metals
Austenite
Toughness
Welds
Steel
Welding
Metals
Chemical analysis
Hot Temperature

ASJC Scopus subject areas

  • Engineering(all)

Cite this

NOTCH TOUGHNESS AND RETAINED AUSTENITE IN 9% NI STEEL WELDS USING FERRITIC FILLER METALS. / Tamura, Hiroshi; Onzawa, Tadao; Uematsu, Susumu; Maekawa, Kiyoaki.

In: Transactions of the Japan Welding Society, Vol. 12, No. 1, 01.01.1981, p. 25-30.

Research output: Contribution to journal › Article

Tamura, H, Onzawa, T, Uematsu, S & Maekawa, K 1981, 'NOTCH TOUGHNESS AND RETAINED AUSTENITE IN 9% NI STEEL WELDS USING FERRITIC FILLER METALS.', Transactions of the Japan Welding Society, vol. 12, no. 1, pp. 25-30.
Tamura H, Onzawa T, Uematsu S, Maekawa K. NOTCH TOUGHNESS AND RETAINED AUSTENITE IN 9% NI STEEL WELDS USING FERRITIC FILLER METALS. Transactions of the Japan Welding Society. 1981 Jan 1;12(1):25-30.
Tamura, Hiroshi ; Onzawa, Tadao ; Uematsu, Susumu ; Maekawa, Kiyoaki. / NOTCH TOUGHNESS AND RETAINED AUSTENITE IN 9% NI STEEL WELDS USING FERRITIC FILLER METALS. In: Transactions of the Japan Welding Society. 1981 ; Vol. 12, No. 1. pp. 25-30.
@article{6ab88db288e64311b8ecdd57c2f9a0d9,
title = "NOTCH TOUGHNESS AND RETAINED AUSTENITE IN 9{\%} NI STEEL WELDS USING FERRITIC FILLER METALS.",
abstract = "A recently developed ferritic filler metal of chemical compositions similar to the base metal was used in welding test specimens. Two welds of single- and multi-pass were made to investigate the effect of multiple thermal cycles on retained austenite and toughness. The influence of the austenite on toughness is discussed in detail.",
author = "Hiroshi Tamura and Tadao Onzawa and Susumu Uematsu and Kiyoaki Maekawa",
year = "1981",
month = "1",
day = "1",
language = "English",
volume = "12",
pages = "25--30",
journal = "Transactions of the Japan Welding Society",
issn = "0385-9282",
number = "1",

}

TY - JOUR

T1 - NOTCH TOUGHNESS AND RETAINED AUSTENITE IN 9% NI STEEL WELDS USING FERRITIC FILLER METALS.

AU - Tamura, Hiroshi

AU - Onzawa, Tadao

AU - Uematsu, Susumu

AU - Maekawa, Kiyoaki

PY - 1981/1/1

Y1 - 1981/1/1

N2 - A recently developed ferritic filler metal of chemical compositions similar to the base metal was used in welding test specimens. Two welds of single- and multi-pass were made to investigate the effect of multiple thermal cycles on retained austenite and toughness. The influence of the austenite on toughness is discussed in detail.

AB - A recently developed ferritic filler metal of chemical compositions similar to the base metal was used in welding test specimens. Two welds of single- and multi-pass were made to investigate the effect of multiple thermal cycles on retained austenite and toughness. The influence of the austenite on toughness is discussed in detail.

UR - http://www.scopus.com/inward/record.url?scp=0019551557&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0019551557&partnerID=8YFLogxK

M3 - Article

VL - 12

SP - 25

EP - 30

JO - Transactions of the Japan Welding Society

JF - Transactions of the Japan Welding Society

SN - 0385-9282

IS - 1

ER -

Access to Document