Position and speed estimation methods of SPMSMs using a hall effect sensor

Kan Akatsu, Nobuhiro Mitomo, Shinji Wakui

Research output: Contribution to journalArticle

Abstract

This paper proposes a speed and position estimation methods by using a Hall effect sensor. The speed is estimated from the fluctuated current which can be observed on the control axis. The position is estimated from the estimated speed and is corrected from the pulse which is generated by the Hall effect sensor mounted on the machine. Although the speed control range is limitted since this method is based on the back EMF, the speed and the position can be estimated without any motor parameter is used. The prposed method is verified by the experiments which 120 W SPMSM is used for the tested machine, the currnet control and the speed control results including the controlable speed range are breifly explained.

Original languageEnglish
JournalIEEJ Transactions on Industry Applications
Volume128
Issue number2
DOIs
Publication statusPublished - 2008
Externally publishedYes

Fingerprint

Hall effect
Sensors
Speed control
Electric potential
Experiments

Keywords

  • Hall effect sensor
  • PMSM
  • Position estimation
  • Sensorless control

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Industrial and Manufacturing Engineering

Cite this

Position and speed estimation methods of SPMSMs using a hall effect sensor. / Akatsu, Kan; Mitomo, Nobuhiro; Wakui, Shinji.

In: IEEJ Transactions on Industry Applications, Vol. 128, No. 2, 2008.

Research output: Contribution to journalArticle

@article{a7f83bff052541d8afeec13e9f2e1526,
title = "Position and speed estimation methods of SPMSMs using a hall effect sensor",
abstract = "This paper proposes a speed and position estimation methods by using a Hall effect sensor. The speed is estimated from the fluctuated current which can be observed on the control axis. The position is estimated from the estimated speed and is corrected from the pulse which is generated by the Hall effect sensor mounted on the machine. Although the speed control range is limitted since this method is based on the back EMF, the speed and the position can be estimated without any motor parameter is used. The prposed method is verified by the experiments which 120 W SPMSM is used for the tested machine, the currnet control and the speed control results including the controlable speed range are breifly explained.",
keywords = "Hall effect sensor, PMSM, Position estimation, Sensorless control",
author = "Kan Akatsu and Nobuhiro Mitomo and Shinji Wakui",
year = "2008",
doi = "10.1541/ieejias.128.125",
language = "English",
volume = "128",
journal = "IEEJ Transactions on Industry Applications",
issn = "0913-6339",
publisher = "The Institute of Electrical Engineers of Japan",
number = "2",

}

TY - JOUR

T1 - Position and speed estimation methods of SPMSMs using a hall effect sensor

AU - Akatsu, Kan

AU - Mitomo, Nobuhiro

AU - Wakui, Shinji

PY - 2008

Y1 - 2008

N2 - This paper proposes a speed and position estimation methods by using a Hall effect sensor. The speed is estimated from the fluctuated current which can be observed on the control axis. The position is estimated from the estimated speed and is corrected from the pulse which is generated by the Hall effect sensor mounted on the machine. Although the speed control range is limitted since this method is based on the back EMF, the speed and the position can be estimated without any motor parameter is used. The prposed method is verified by the experiments which 120 W SPMSM is used for the tested machine, the currnet control and the speed control results including the controlable speed range are breifly explained.

AB - This paper proposes a speed and position estimation methods by using a Hall effect sensor. The speed is estimated from the fluctuated current which can be observed on the control axis. The position is estimated from the estimated speed and is corrected from the pulse which is generated by the Hall effect sensor mounted on the machine. Although the speed control range is limitted since this method is based on the back EMF, the speed and the position can be estimated without any motor parameter is used. The prposed method is verified by the experiments which 120 W SPMSM is used for the tested machine, the currnet control and the speed control results including the controlable speed range are breifly explained.

KW - Hall effect sensor

KW - PMSM

KW - Position estimation

KW - Sensorless control

UR - http://www.scopus.com/inward/record.url?scp=72649104549&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=72649104549&partnerID=8YFLogxK

U2 - 10.1541/ieejias.128.125

DO - 10.1541/ieejias.128.125

M3 - Article

AN - SCOPUS:72649104549

VL - 128

JO - IEEJ Transactions on Industry Applications

JF - IEEJ Transactions on Industry Applications

SN - 0913-6339

IS - 2

ER -