Powder forming design on the basis of granular modeling

Tatsuhiko Aizawa, S. Tamura, J. Kihara

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

New granular modeling has been proposed and developed to make simulation of powder compaction for flowability evaluation. To realize the computer aided design for powder forming, a granular simulation system has been created: Preprocessor to provide adequate granular model alignment, Numerical solver to trace time histories of element configuration and stress transfer, and Postprocessor to evaluate the calculated results. For numerical examples, several densification and compaction problems have been selected to demonstrate the validity and effectiveness of our approach.

Original languageEnglish
Title of host publicationComputational Methods on Materials Processing
PublisherPubl by ASME
Pages31-45
Number of pages15
ISBN (Print)0791811158
Publication statusPublished - 1992 Dec 1
EventWinter Annual Meeting of the American Society of Mechanical Engineers - Anaheim, CA, USA
Duration: 1992 Nov 81992 Nov 13

Publication series

NameAmerican Society of Mechanical Engineers, Materials Division (Publication) MD
Volume39

Other

OtherWinter Annual Meeting of the American Society of Mechanical Engineers
CityAnaheim, CA, USA
Period92/11/892/11/13

ASJC Scopus subject areas

  • Engineering(all)

Fingerprint Dive into the research topics of 'Powder forming design on the basis of granular modeling'. Together they form a unique fingerprint.

  • Cite this

    Aizawa, T., Tamura, S., & Kihara, J. (1992). Powder forming design on the basis of granular modeling. In Computational Methods on Materials Processing (pp. 31-45). (American Society of Mechanical Engineers, Materials Division (Publication) MD; Vol. 39). Publ by ASME.