Preparation and evaluation of stress-elastic and plastic strain diagrams of sintered steels

Norimitsu Hirose, Shin Ichi Tanaka, Akira Fujiki, Junichi Asami

Research output: Contribution to journalArticle

Abstract

The differences in Young's moduli (E) and Poisson's ratios (v), calculated by the stress-strain diagrams from tensile testing (TT) and the sound velocities from an acoustic pulse method (APM), of sintered steels were compared. The values of E TT and V TT were smaller than those of E APM and V APM, respectively, because not only the elastic strain, but also the plastic strain are included in the stress-strain diagram of the sintered steels. Furthermore, by using the longitudinal and transverse elastic strains calculated from the values of E APM and V APM, the longitudinal and transverse plastic strains were separated from the stress-longitudinal and transverse strain diagrams. Consequently, the elastic limit or 0.2% yield strength was simply defined from the stress-longitudinal plastic strain diagram, in the case of the sintered steels which does not show a linearity of stress-strain diagram at the lower stresses. The differences in the elastic and plastic strains versus stress of each sample were explained on the basis of the pore characteristics, such as size, shape, and interconnection, and microstructures.

Original languageEnglish
Pages (from-to)31-35
Number of pages5
JournalFuntai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy
Volume53
Issue number1
DOIs
Publication statusPublished - 2006 Jan
Externally publishedYes

Fingerprint

Steel
Plastic deformation
Acoustics
Tensile testing
Acoustic wave velocity
Poisson ratio
Yield stress
Elastic moduli
Microstructure

Keywords

  • Plastic strain
  • Poisson's ratio
  • Stress-strain diagram
  • Young's modulus

ASJC Scopus subject areas

  • Mechanical Engineering
  • Metals and Alloys

Cite this

Preparation and evaluation of stress-elastic and plastic strain diagrams of sintered steels. / Hirose, Norimitsu; Tanaka, Shin Ichi; Fujiki, Akira; Asami, Junichi.

In: Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, Vol. 53, No. 1, 01.2006, p. 31-35.

Research output: Contribution to journalArticle

@article{ba1467bd182b43b998cc026952023370,
title = "Preparation and evaluation of stress-elastic and plastic strain diagrams of sintered steels",
abstract = "The differences in Young's moduli (E) and Poisson's ratios (v), calculated by the stress-strain diagrams from tensile testing (TT) and the sound velocities from an acoustic pulse method (APM), of sintered steels were compared. The values of E TT and V TT were smaller than those of E APM and V APM, respectively, because not only the elastic strain, but also the plastic strain are included in the stress-strain diagram of the sintered steels. Furthermore, by using the longitudinal and transverse elastic strains calculated from the values of E APM and V APM, the longitudinal and transverse plastic strains were separated from the stress-longitudinal and transverse strain diagrams. Consequently, the elastic limit or 0.2{\%} yield strength was simply defined from the stress-longitudinal plastic strain diagram, in the case of the sintered steels which does not show a linearity of stress-strain diagram at the lower stresses. The differences in the elastic and plastic strains versus stress of each sample were explained on the basis of the pore characteristics, such as size, shape, and interconnection, and microstructures.",
keywords = "Plastic strain, Poisson's ratio, Stress-strain diagram, Young's modulus",
author = "Norimitsu Hirose and Tanaka, {Shin Ichi} and Akira Fujiki and Junichi Asami",
year = "2006",
month = "1",
doi = "10.2497/jjspm.53.31",
language = "English",
volume = "53",
pages = "31--35",
journal = "Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy",
issn = "0532-8799",
publisher = "Funtai Funamtsu Yakin Kyokai/Japan Soc. of Powder Metallurgy",
number = "1",

}

TY - JOUR

T1 - Preparation and evaluation of stress-elastic and plastic strain diagrams of sintered steels

AU - Hirose, Norimitsu

AU - Tanaka, Shin Ichi

AU - Fujiki, Akira

AU - Asami, Junichi

PY - 2006/1

Y1 - 2006/1

N2 - The differences in Young's moduli (E) and Poisson's ratios (v), calculated by the stress-strain diagrams from tensile testing (TT) and the sound velocities from an acoustic pulse method (APM), of sintered steels were compared. The values of E TT and V TT were smaller than those of E APM and V APM, respectively, because not only the elastic strain, but also the plastic strain are included in the stress-strain diagram of the sintered steels. Furthermore, by using the longitudinal and transverse elastic strains calculated from the values of E APM and V APM, the longitudinal and transverse plastic strains were separated from the stress-longitudinal and transverse strain diagrams. Consequently, the elastic limit or 0.2% yield strength was simply defined from the stress-longitudinal plastic strain diagram, in the case of the sintered steels which does not show a linearity of stress-strain diagram at the lower stresses. The differences in the elastic and plastic strains versus stress of each sample were explained on the basis of the pore characteristics, such as size, shape, and interconnection, and microstructures.

AB - The differences in Young's moduli (E) and Poisson's ratios (v), calculated by the stress-strain diagrams from tensile testing (TT) and the sound velocities from an acoustic pulse method (APM), of sintered steels were compared. The values of E TT and V TT were smaller than those of E APM and V APM, respectively, because not only the elastic strain, but also the plastic strain are included in the stress-strain diagram of the sintered steels. Furthermore, by using the longitudinal and transverse elastic strains calculated from the values of E APM and V APM, the longitudinal and transverse plastic strains were separated from the stress-longitudinal and transverse strain diagrams. Consequently, the elastic limit or 0.2% yield strength was simply defined from the stress-longitudinal plastic strain diagram, in the case of the sintered steels which does not show a linearity of stress-strain diagram at the lower stresses. The differences in the elastic and plastic strains versus stress of each sample were explained on the basis of the pore characteristics, such as size, shape, and interconnection, and microstructures.

KW - Plastic strain

KW - Poisson's ratio

KW - Stress-strain diagram

KW - Young's modulus

UR - http://www.scopus.com/inward/record.url?scp=33645963175&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33645963175&partnerID=8YFLogxK

U2 - 10.2497/jjspm.53.31

DO - 10.2497/jjspm.53.31

M3 - Article

AN - SCOPUS:33645963175

VL - 53

SP - 31

EP - 35

JO - Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy

JF - Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy

SN - 0532-8799

IS - 1

ER -