Processing and characterization of alumina wire by controlled fracture forming process

(II) Resintering behavior and mechanical properties

W. B. Du, K. Tatsuzawa, T. Aizawa, J. Kihara

Research output: Contribution to journalArticle

Abstract

The resintering behavior of the CS-Al2O3 wire, and its mechanical properties with respect to the Vickers hardness and the tensile strength has been investigated. Results indicate that the CS-98 wire can be fully densified without abnormal grain growth. The improved densification is attributed to the crushed constituent particles with new surfaces accelerating the matter diffusion. The retardation of grain growth is attributed to the homogeneously distributed pores in the green microstructure, which act the drag forces on grain boundary migration. The fracture mode of the resintered wire shows to be dependent on the residual pores, viz. the transgranular fracture is dominant at porosity < 2%, whereas the intergranular becomes controlling at porosity > 2%. The distribution of the Vickers hardness on the cross-sectional surface of the Al2O3 core in the resintered Al2O3/SUS 304 composite wire indicates that the sheath material has a significant influence on the mechanical properties of the core.

Original languageEnglish
Pages (from-to)248-257
Number of pages10
JournalMaterials Science and Engineering A
Volume316
Issue number1-2
DOIs
Publication statusPublished - 2001 Oct 15
Externally publishedYes

Fingerprint

Aluminum Oxide
Alumina
aluminum oxides
wire
Wire
mechanical properties
Mechanical properties
Vickers hardness
Processing
porosity
Grain growth
Cable cores
densification
Densification
sheaths
tensile strength
drag
Drag
Grain boundaries
Tensile strength

Keywords

  • Controlled fracture forming process
  • Densification
  • Grain growth
  • Mechanical properties
  • Resintered microstructure

ASJC Scopus subject areas

  • Materials Science(all)

Cite this

Processing and characterization of alumina wire by controlled fracture forming process : (II) Resintering behavior and mechanical properties. / Du, W. B.; Tatsuzawa, K.; Aizawa, T.; Kihara, J.

In: Materials Science and Engineering A, Vol. 316, No. 1-2, 15.10.2001, p. 248-257.

Research output: Contribution to journalArticle

@article{7fda97f649f14da09b28f46f4f7e968a,
title = "Processing and characterization of alumina wire by controlled fracture forming process: (II) Resintering behavior and mechanical properties",
abstract = "The resintering behavior of the CS-Al2O3 wire, and its mechanical properties with respect to the Vickers hardness and the tensile strength has been investigated. Results indicate that the CS-98 wire can be fully densified without abnormal grain growth. The improved densification is attributed to the crushed constituent particles with new surfaces accelerating the matter diffusion. The retardation of grain growth is attributed to the homogeneously distributed pores in the green microstructure, which act the drag forces on grain boundary migration. The fracture mode of the resintered wire shows to be dependent on the residual pores, viz. the transgranular fracture is dominant at porosity < 2{\%}, whereas the intergranular becomes controlling at porosity > 2{\%}. The distribution of the Vickers hardness on the cross-sectional surface of the Al2O3 core in the resintered Al2O3/SUS 304 composite wire indicates that the sheath material has a significant influence on the mechanical properties of the core.",
keywords = "Controlled fracture forming process, Densification, Grain growth, Mechanical properties, Resintered microstructure",
author = "Du, {W. B.} and K. Tatsuzawa and T. Aizawa and J. Kihara",
year = "2001",
month = "10",
day = "15",
doi = "10.1016/S0921-5093(01)01242-4",
language = "English",
volume = "316",
pages = "248--257",
journal = "Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing",
issn = "0921-5093",
publisher = "Elsevier BV",
number = "1-2",

}

TY - JOUR

T1 - Processing and characterization of alumina wire by controlled fracture forming process

T2 - (II) Resintering behavior and mechanical properties

AU - Du, W. B.

AU - Tatsuzawa, K.

AU - Aizawa, T.

AU - Kihara, J.

PY - 2001/10/15

Y1 - 2001/10/15

N2 - The resintering behavior of the CS-Al2O3 wire, and its mechanical properties with respect to the Vickers hardness and the tensile strength has been investigated. Results indicate that the CS-98 wire can be fully densified without abnormal grain growth. The improved densification is attributed to the crushed constituent particles with new surfaces accelerating the matter diffusion. The retardation of grain growth is attributed to the homogeneously distributed pores in the green microstructure, which act the drag forces on grain boundary migration. The fracture mode of the resintered wire shows to be dependent on the residual pores, viz. the transgranular fracture is dominant at porosity < 2%, whereas the intergranular becomes controlling at porosity > 2%. The distribution of the Vickers hardness on the cross-sectional surface of the Al2O3 core in the resintered Al2O3/SUS 304 composite wire indicates that the sheath material has a significant influence on the mechanical properties of the core.

AB - The resintering behavior of the CS-Al2O3 wire, and its mechanical properties with respect to the Vickers hardness and the tensile strength has been investigated. Results indicate that the CS-98 wire can be fully densified without abnormal grain growth. The improved densification is attributed to the crushed constituent particles with new surfaces accelerating the matter diffusion. The retardation of grain growth is attributed to the homogeneously distributed pores in the green microstructure, which act the drag forces on grain boundary migration. The fracture mode of the resintered wire shows to be dependent on the residual pores, viz. the transgranular fracture is dominant at porosity < 2%, whereas the intergranular becomes controlling at porosity > 2%. The distribution of the Vickers hardness on the cross-sectional surface of the Al2O3 core in the resintered Al2O3/SUS 304 composite wire indicates that the sheath material has a significant influence on the mechanical properties of the core.

KW - Controlled fracture forming process

KW - Densification

KW - Grain growth

KW - Mechanical properties

KW - Resintered microstructure

UR - http://www.scopus.com/inward/record.url?scp=0035888161&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0035888161&partnerID=8YFLogxK

U2 - 10.1016/S0921-5093(01)01242-4

DO - 10.1016/S0921-5093(01)01242-4

M3 - Article

VL - 316

SP - 248

EP - 257

JO - Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing

JF - Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing

SN - 0921-5093

IS - 1-2

ER -