Rapid Fabrication of a Crystalline Myristic Acid-Based Superhydrophobic Film with Corrosion Resistance on Magnesium Alloys by the Facile One-Step Immersion Process

Takahiro Ishizaki, Yuta Shimada, Mika Tsunakawa, Hoonseung Lee, Tetsuya Yokomizo, Shutaro Hisada, Kae Nakamura

Research output: Contribution to journalArticle

5 Citations (Scopus)

Abstract

A simple, easy, and rapid process of fabricating superhydrophobic surfaces on magnesium alloy AZ31 by a one-step immersion at room temperature was developed. The myristic acid-modified micro-/nanostructured surfaces showed static water contact angles over 150° and water contact angle hysteresis below 10°, thus illustrating superhydrophobic property. The shortest treatment time for obtaining the superhydrophobic surfaces was 30 s. In addition, we demonstrated for the first time that crystalline solid myristic acid could be formed on a Mg alloy using a suitable molar ratio of Ce ions and myristic acid. The contact angle hysteresis was lowered with an increase in the immersion time. Potentiodynamic polarization curve measurements revealed that the corrosion resistance of AZ31 treated by the immersion process improved considerably by the formation of superhydrophobic surfaces. The chemical durability of the superhydrophobic surfaces fabricated on AZ31 was also examined. The static water contact angle values for the superhydrophobic surfaces after immersion in aqueous solutions at pHs 4, 7, and 10 for 12 h were estimated to be 90 ± 2°, 119 ± 2°, and 138 ± 2°, respectively, demonstrating that their chemical durability in a basic solution was high.

Original languageEnglish
Pages (from-to)7904-7915
Number of pages12
JournalACS Omega
Volume2
Issue number11
DOIs
Publication statusPublished - 2017 Jan 1

Fingerprint

Myristic Acid
Magnesium alloys
Corrosion resistance
Crystalline materials
Fabrication
Contact angle
Acids
Hysteresis
Water
Durability
Potentiodynamic polarization
Ions

ASJC Scopus subject areas

  • Chemistry(all)
  • Chemical Engineering(all)

Cite this

Rapid Fabrication of a Crystalline Myristic Acid-Based Superhydrophobic Film with Corrosion Resistance on Magnesium Alloys by the Facile One-Step Immersion Process. / Ishizaki, Takahiro; Shimada, Yuta; Tsunakawa, Mika; Lee, Hoonseung; Yokomizo, Tetsuya; Hisada, Shutaro; Nakamura, Kae.

In: ACS Omega, Vol. 2, No. 11, 01.01.2017, p. 7904-7915.

Research output: Contribution to journalArticle

Ishizaki, Takahiro ; Shimada, Yuta ; Tsunakawa, Mika ; Lee, Hoonseung ; Yokomizo, Tetsuya ; Hisada, Shutaro ; Nakamura, Kae. / Rapid Fabrication of a Crystalline Myristic Acid-Based Superhydrophobic Film with Corrosion Resistance on Magnesium Alloys by the Facile One-Step Immersion Process. In: ACS Omega. 2017 ; Vol. 2, No. 11. pp. 7904-7915.
@article{8c57644a773d4d668427ae42272086ac,
title = "Rapid Fabrication of a Crystalline Myristic Acid-Based Superhydrophobic Film with Corrosion Resistance on Magnesium Alloys by the Facile One-Step Immersion Process",
abstract = "A simple, easy, and rapid process of fabricating superhydrophobic surfaces on magnesium alloy AZ31 by a one-step immersion at room temperature was developed. The myristic acid-modified micro-/nanostructured surfaces showed static water contact angles over 150° and water contact angle hysteresis below 10°, thus illustrating superhydrophobic property. The shortest treatment time for obtaining the superhydrophobic surfaces was 30 s. In addition, we demonstrated for the first time that crystalline solid myristic acid could be formed on a Mg alloy using a suitable molar ratio of Ce ions and myristic acid. The contact angle hysteresis was lowered with an increase in the immersion time. Potentiodynamic polarization curve measurements revealed that the corrosion resistance of AZ31 treated by the immersion process improved considerably by the formation of superhydrophobic surfaces. The chemical durability of the superhydrophobic surfaces fabricated on AZ31 was also examined. The static water contact angle values for the superhydrophobic surfaces after immersion in aqueous solutions at pHs 4, 7, and 10 for 12 h were estimated to be 90 ± 2°, 119 ± 2°, and 138 ± 2°, respectively, demonstrating that their chemical durability in a basic solution was high.",
author = "Takahiro Ishizaki and Yuta Shimada and Mika Tsunakawa and Hoonseung Lee and Tetsuya Yokomizo and Shutaro Hisada and Kae Nakamura",
year = "2017",
month = "1",
day = "1",
doi = "10.1021/acsomega.7b01256",
language = "English",
volume = "2",
pages = "7904--7915",
journal = "ACS Omega",
issn = "2470-1343",
publisher = "American Chemical Society",
number = "11",

}

TY - JOUR

T1 - Rapid Fabrication of a Crystalline Myristic Acid-Based Superhydrophobic Film with Corrosion Resistance on Magnesium Alloys by the Facile One-Step Immersion Process

AU - Ishizaki, Takahiro

AU - Shimada, Yuta

AU - Tsunakawa, Mika

AU - Lee, Hoonseung

AU - Yokomizo, Tetsuya

AU - Hisada, Shutaro

AU - Nakamura, Kae

PY - 2017/1/1

Y1 - 2017/1/1

N2 - A simple, easy, and rapid process of fabricating superhydrophobic surfaces on magnesium alloy AZ31 by a one-step immersion at room temperature was developed. The myristic acid-modified micro-/nanostructured surfaces showed static water contact angles over 150° and water contact angle hysteresis below 10°, thus illustrating superhydrophobic property. The shortest treatment time for obtaining the superhydrophobic surfaces was 30 s. In addition, we demonstrated for the first time that crystalline solid myristic acid could be formed on a Mg alloy using a suitable molar ratio of Ce ions and myristic acid. The contact angle hysteresis was lowered with an increase in the immersion time. Potentiodynamic polarization curve measurements revealed that the corrosion resistance of AZ31 treated by the immersion process improved considerably by the formation of superhydrophobic surfaces. The chemical durability of the superhydrophobic surfaces fabricated on AZ31 was also examined. The static water contact angle values for the superhydrophobic surfaces after immersion in aqueous solutions at pHs 4, 7, and 10 for 12 h were estimated to be 90 ± 2°, 119 ± 2°, and 138 ± 2°, respectively, demonstrating that their chemical durability in a basic solution was high.

AB - A simple, easy, and rapid process of fabricating superhydrophobic surfaces on magnesium alloy AZ31 by a one-step immersion at room temperature was developed. The myristic acid-modified micro-/nanostructured surfaces showed static water contact angles over 150° and water contact angle hysteresis below 10°, thus illustrating superhydrophobic property. The shortest treatment time for obtaining the superhydrophobic surfaces was 30 s. In addition, we demonstrated for the first time that crystalline solid myristic acid could be formed on a Mg alloy using a suitable molar ratio of Ce ions and myristic acid. The contact angle hysteresis was lowered with an increase in the immersion time. Potentiodynamic polarization curve measurements revealed that the corrosion resistance of AZ31 treated by the immersion process improved considerably by the formation of superhydrophobic surfaces. The chemical durability of the superhydrophobic surfaces fabricated on AZ31 was also examined. The static water contact angle values for the superhydrophobic surfaces after immersion in aqueous solutions at pHs 4, 7, and 10 for 12 h were estimated to be 90 ± 2°, 119 ± 2°, and 138 ± 2°, respectively, demonstrating that their chemical durability in a basic solution was high.

UR - http://www.scopus.com/inward/record.url?scp=85051951638&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85051951638&partnerID=8YFLogxK

U2 - 10.1021/acsomega.7b01256

DO - 10.1021/acsomega.7b01256

M3 - Article

VL - 2

SP - 7904

EP - 7915

JO - ACS Omega

JF - ACS Omega

SN - 2470-1343

IS - 11

ER -